Nice tool for conducting parasitic draw tests. I start by slapping on the amp clamp to make sure I don't have a draw above 10 amps before I connect the multi meter.
Thanks Dave for the rundown..looks really sweet..oh yeah you should have recorded in full screen 😂...I already read the comments so I couldn't help myself..✌🔥
What was fast? I just realized I recorded it holding phone wrong way. Ohh well. Rather it be a full screen video but my bad unless there way to edit it to full screen. Lemme know
I emailed the company. They said Matco didn't have an "exclusive" on it, but they did buy up the entire first run. Another month or two & more should be hitting the open market.
I knew you where going to buy one ...and it s Bluetooth .... you should make a video of all the Bluetooth functions .. looks good ...and I saw an orange oil filter cap are you using Derman parts ..lol ...............dont let JT see that ..Great video Dave ..
Not 100% true I have in stalled several doorman's and have had to replace almost them all after 3-5 months due to cracking and leaking because of the expansion and contraction rate between the block and the aluminum cooler and the Updated OEM replacement does not have these issues and is no longer plastic but Carbon Composite @@bigcountry425
I do this thru the cigarette lighter plug using a milli-amp clamp-meter. Power probe will sell thousands of these though being most techs don't have milli-amp clamps.
@@lakesautomotivediagnostics6509 I am sure my dealer would ship ya one if ya paid him over phone. He is a cool guy. If interested let me know I will ask him if he would do such. Might be able to order off Matco site. Unsure haven’t checked. But my dealer has many of them
Power probe will put it on site soon. You will see them around soon. Prob is Matco bought all of what power probe had. So Matco only one two have it right now.
Yeah it’s brand new and you can’t even find it online yet. PowerProbe has been like that with their newer products the last few years. It’ll be online soon
I needed new portable memory saver anyway. Was tired of using my big jump pack with cable to obd port. Most rechargeable small portable memory savers are 100 plus anyway. So two tools in one.
What motor? If ya talking about something I said on a live stream I am not sure. Motor came from a ford dealership. I will find out both companies covering motor. Service writers handled that not I. But will find out for ya.
One thing I now have thought of I should have mentioned in video is you can easily and quickly test for a draw if vehicle comes to shop dead. Just disconnect battery that is dead plug in and walk away work on other job and go back 30 mins later see what it says. Maybe buy then ya have new battery already and you know if you have a draw or not before installing a new battery. Could even lock it in the car in parking lot and pay attention with cell phone or tablet what's going on. I tested and blue tooth it works for about 30-45 feet away.
@@lakesautomotivediagnostics6509 Thats cool there dealer somewhat close. I pissed I realized I held phone wrong way after posting video. I want full screen videos. Ohh well.
No link yet. Matco bought all of what power probe had. Once more are made i am sure you will see them on many sites. Your could try Matco online. As of last time I looked they don’t have it on there site yet.
LOL. Yea its a little pricey. But quick easy small and has more than one use. Power Probe products usually are well made a work. I didn't pay 250.00 for it. Matco dealer gave me good deal on it
@@nordicpride9708 absolutely I definitely want one and will buy one I use my power probe hook to do parasitic draw test what I meant by my comment with laughing crying face, I was leaving comments as I was watching the video and I think I asked how much it was and then got to the part of video where he gave the price and left this comment🔧✌️🔧
Nice tool for conducting parasitic draw tests. I start by slapping on the amp clamp to make sure I don't have a draw above 10 amps before I connect the multi meter.
Should have said in has internal breaker to save tool. Takes about 2mins to reset. No fuse to blow.
Pretty cool, I haven't seen this yet. Thanks for sharing!
Thanks for sharing..looks like a great tool to have
Thanks for the info. Gonna have to grab me one.
Thanks Dave for the rundown..looks really sweet..oh yeah you should have recorded in full screen 😂...I already read the comments so I couldn't help myself..✌🔥
Looks like a cool tool to have in the box! Powerprobe makes some good stuff for sure!
Quick easy way to check for a draw. Like that it can be a memory saver also.
Yes, but is it worth $254. So new its not even on their website or no longer available
@@dhonzikit’s only available through Matco Tools at the moment.
Nice tool. The dorkman OFH? In my world, that’s job security.
Thank you
Dang, that was fast!!
What was fast? I just realized I recorded it holding phone wrong way. Ohh well. Rather it be a full screen video but my bad unless there way to edit it to full screen. Lemme know
@@Quickwrench75 redo the video in landscape mode and post it again no big deal
@@CPthetooladdict prob will.
I emailed the company. They said Matco didn't have an "exclusive" on it, but they did buy up the entire first run. Another month or two & more should be hitting the open market.
I knew you where going to buy one ...and it s Bluetooth .... you should make a video of all the Bluetooth functions .. looks good ...and I saw an orange oil filter cap are you using Derman parts ..lol ...............dont let JT see that ..Great video Dave ..
Blue tooth just shows ya volts and draw with graph at same time.
Unfortunately the Dorman oil coolers for the 3.6 Mopars are better than the OEMs.
Not 100% true I have in stalled several doorman's and have had to replace almost them all after 3-5 months due to cracking and leaking because of the expansion and contraction rate between the block and the aluminum cooler and the Updated OEM replacement does not have these issues and is no longer plastic but Carbon Composite @@bigcountry425
I like it !
i think should be able to do up to 20A draw
I do this thru the cigarette lighter plug using a milli-amp clamp-meter. Power probe will sell thousands of these though being most techs don't have milli-amp clamps.
Great tip!! Just wondering how is it you wire this to connect the amp clamp.??
Nice video 👍😊.
Sweet light
Had it a few years now. It will run all day on a 4amphr 29 volt dewalt/mac battery.
@@Quickwrench75sweet
I sure could have used this during covid. We had lots of cars come in with dead batteries because they had been sitting / not driven for weeks.
Very nice video. No bs. Straight to the point.
How much is this going for? Its a neat setup.
250.00
Did you get it at the tool show or off the truck?
Matco bought everyone powerprobe has made. So Matco trucks will have and sure everyone else also will once powerprobe get more made.
@@Quickwrench75 dang it we don’t have a Macco truck😢😂
@@lakesautomotivediagnostics6509 I am sure my dealer would ship ya one if ya paid him over phone. He is a cool guy. If interested let me know I will ask him if he would do such. Might be able to order off Matco site. Unsure haven’t checked. But my dealer has many of them
I don't have a Matco dealer anymore. You can't buy this on the online site nor does PP list it on their site. I kind of want one.
Power probe will put it on site soon. You will see them around soon. Prob is Matco bought all of what power probe had. So Matco only one two have it right now.
Yeah it’s brand new and you can’t even find it online yet. PowerProbe has been like that with their newer products the last few years. It’ll be online soon
all tool trucks will have it soon
You know me, I’ll probably get one anything to make the job a little easier plug and play
I needed new portable memory saver anyway. Was tired of using my big jump pack with cable to obd port. Most rechargeable small portable memory savers are 100 plus anyway. So two tools in one.
I like it
@@lakesautomotivediagnostics6509
You mean we buy it, but never use it. Still will continue to pull out the old amp clamp and multimeter 😂
@@lynxstarautomotive208 that is a possibility🤫
what company covered that motor?
What motor? If ya talking about something I said on a live stream I am not sure. Motor came from a ford dealership. I will find out both companies covering motor. Service writers handled that not I. But will find out for ya.
Pretty neat how much was it?
One thing I now have thought of I should have mentioned in video is you can easily and quickly test for a draw if vehicle comes to shop dead. Just disconnect battery that is dead plug in and walk away work on other job and go back 30 mins later see what it says. Maybe buy then ya have new battery already and you know if you have a draw or not before installing a new battery. Could even lock it in the car in parking lot and pay attention with cell phone or tablet what's going on. I tested and blue tooth it works for about 30-45 feet away.
@@Quickwrench75 sounds pretty cool I’m sure I will get one I have a buddy that works at a dealership 30 minutes from me and he has a Matco dealer
@@lakesautomotivediagnostics6509 Thats cool there dealer somewhat close. I pissed I realized I held phone wrong way after posting video. I want full screen videos. Ohh well.
@@Quickwrench75 just redo it😁
wooow thats very expensive $250
Do you have a link?
No link yet. Matco bought all of what power probe had. Once more are made i am sure you will see them on many sites. Your could try Matco online. As of last time I looked they don’t have it on there site yet.
Where can you buy it ?
Matco truck right now. Or possibly Matco site. Prob is Matco bought all of what power probe had. So in time it be available other places.
@@Quickwrench75Thank you for information.
Do you have a link for this ?
No. Matco bought all of them when it released at tool show Matco had. Matco has them but I am sure within a month or few it be available elsewhere.
🔧✌️🔧
How much?
250.00
power probe should demonstraite this ?????
I cant get mine to read the draw it just shows zero mA
Did you disconnect neg battery cable once you hooked it up?
If battery on car still connected it’s gonna read zero. Have to disconnect neg battery cable.
Take my money meowwww!!!
LOL. Yea its a little pricey. But quick easy small and has more than one use. Power Probe products usually are well made a work. I didn't pay 250.00 for it. Matco dealer gave me good deal on it
@@Quickwrench75 i dont give a hoot on the price lol you just put me on...matco comes by tomorrow 😁
@@Quickwrench75 best belive ill be making a video also shouting you out on it too haha
Around 250 I see😂
One job would pay for the tool in most cases
@@nordicpride9708 absolutely I definitely want one and will buy one I use my power probe hook to do parasitic draw test what I meant by my comment with laughing crying face, I was leaving comments as I was watching the video and I think I asked how much it was and then got to the part of video where he gave the price and left this comment🔧✌️🔧
Dave dave buy me one ill send ya moneys I dont have tool dealers.
Dealer out of them. I let ya know when he has again and if ya still want one I pick one up and ship to you.
Nah. No thank you. There are better and cheaper ways. And most techs already have this capability with tools they already own.
where to buy, what is wrong with you people, you should always tell us where to buy it, i can't find it anywhere
Matco tool has it. Soon powerprobe will have them everywhere. I did mention where I bought it.