KTM 690 & Husqvarna 701 Engine Rebuild | Part 5: Top End Assembly
Vložit
- čas přidán 27. 08. 2024
- Shop Now | KTM 690 & Husqvarna 701 Engine Rebuild www.rockymount...
This is part five of our KTM 690 & Husqvarna 701 complete engine rebuild. In this video, we begin the process of rebuilding the engine, starting with assembly of the top end. The steps shown here will be very similar for other late model KTM 690 and Husqvarna 701 motorcycle models. Stay tuned for this series to see the complete engine disassembly and rebuild process.
Check out www.rockymount... for all your parts, apparel, and accessories!
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Rocky Mountain ATV/MC On Social Media!
FACEBOOK: www.facebook.c...
INSTAGRAM: www.instagram....
TWITTER: RM...
These series are fantastic. Please keep them up!
Does anyone know the value of kTM690 crankshaft index position?
Is there anything more satisfying than seeing the cylinder with the piston mate to the engine case.
Does anyone know the value of kTM690 crankshaft index position?
Love this 690/701 series. Makes me more confident when the time comes on my bike
time to put the 733 kit in my husky 701 sm!
Was very complete and full of details thanks 🙏
Thanks for watching! What repairs did you have to do?
Thanks exelent information
Very good Video.
I'll have to learn all of this, as I have 3 engines this winter ready for an overhaul.
Suggestion: Giving the rating for the bolts in Newtonmeters for us metric folks would be a very nice and welcome addition.
Does anyone know the value of kTM690 crankshaft index position?
when you should rebuild top end on 701?
Great vidéo.
Why don't you use a pin in the balancer shaft (hole in left cranckcase half) to find TDC, and to align the camshaft when you put back the timing chain ?
That's the best way, but not necessary. On some bikes you can just remove the washer and use the bolt, but others will need the special tool. It's just one less tool you won't have to buy. -Charles
Does anyone know the value of kTM690 crankshaft index position?
new CYLINDER HEAD SCREW use or not , i change my gasked and i use all old screw
Are you able to do a top end with the engine still in the bike? I have to do one for a customer and just doing some research
You probably could, although it would most likely more of a pain to do it that way. The motor drops out the bottom without much work and you'd save yourself a lot of headache by doing the top end with the motor out. Good luck!
So I just finished assembling the engine and I just noticed that the picture from the manual noted that the clip has a particular direction.....and I installed it the other way. The clip was fully seated into the groove and was a real pain in the butt to get in place. Does the clip HAVE to be installed in that direction? I've assembled many engines before and never had an issue with clip direction, I usually just put the opening at 12 or 6 o'clock. Really don't feel like tearing this engine down again and buying new head bolts and a gasket. I waited 4 months for those parts..
Anyone have a part number for the puller on the flywheel? is it a 33mmX1.5?
That's correct. The part number we used for the flywheel puller was 1179010003.
Buenas tardes profe un saludo desde Quito Ecuador cómo puedo hacer para obtener un manual de despiece de las KTM ayúdeme please necesito esos manuall
Hola puedes decirme porque mi moto expulsa aceite por el tubo que hay arriba en la tapa negra de la culata? Gracias.