How to tie a bolt snap? - Preparation for GUE Fundamentals Class
Vložit
- čas přidán 3. 08. 2024
- #guedivers #gueheroes #divegue
After you configured the hoses on your scuba diving regulator, you need to tie two bolt snaps to be able to clip them off. In this video, I show you how to tie a bolt snap, where to tie it and I share some additional information with you about bolt snaps. This is a whole series on how to be best prepared for your GUE Fundamentals Class and to know how to tie a bolt snap will save you a lot of time during the actual class.
01:45 What material should the bolt snap be made of?
02:11 Where to fix the bolt snap?
04:23 Sizes of bolt snaps on my setup
04:51 How to tie the bolt snap?
Bolt Snaps:
amzn.to/2Yw3YGg
amzn.to/2Z5bTtc
amzn.to/3dr0WHq
Caveline:
amzn.to/2NsZTfu
How to configure regulators and tanks:
• GUE Fundamentals Equip... - Jak na to + styl
Hi guys! Do you use my method to tie boltsnaps or do you have another method? Please let me know!
I tie mine in my favorite color of line :) But, the same method. Great video!
Hi. Great video. I've been testing for a while silicone o rings and they work great. My spg is attached with it and it's fixed and it doesn't break like rubber o-rings. Advantages? In case of an entanglement and if the boltsnap is unaacesable or jammed I can break it pulling with force of it instead of using a line cutter.
Possible. I personally don’t trust orings on that matter. But if it works for you, that’s fine!
@@DoktorBEN I only use it with those things that are attached at another point at me p.e hoses to the first stage, so there is no risk of loosing equipment. Cordless flashlights and anything that's not attached to me at any other point is tied with caveline as you've shown.
That’s a nice tip to secure the knot!
I had to to replace my high pressure hose. Couldn't remember how to tie the SPG bolt snap. You did it the same way my GUE instructor did, except he looped 2 times instead of 3. This was helpful in remembering how.
My SPG hose is 26". I believe GUE uses 24.5." Since in the US everything is in inches instead of centimeters the choose is 24" or 26". My SPG ring is slightly larger than what you show. It is just big enough for me to fit my finger though with gloves.
Depends on the line…a thicker line might be ok with 2 wraps a very thin one might need even 4. So it doesn’t really make a difference.
The length of the hose in turn depends on the regs and the backplate you use. And quite frankly…hoses are often not cut precisely and may vary anyway a bit.
Awesome Footage... Keep going!!! Good Work
Thank you very much!
Skip to 6:18
What do you think of the Xdeep boltssnaps ? Can we use it for the GUE fundamental ? Is it within the GUE standards ?
Btw thanks for the amazing videos please make more about the GUE fundamentals course and maybe the drills that are perform during the course
Again thank you for the videos
Thanks! Yes I can do that!
Regarding XDeep snaps…. We’ll they’re not against standards and I think they are very nice, yet a bit overpriced for my taste