Laser Welder! Is Full Penetration Welding Really Possible ?
![weld [HAGOJIBI]](http://yt3.ggpht.com/ytc/AIdro_lButtTy6bwshHHOdUuuc7ktsddm0YgRj2FhqoPUm3aQA=s48-c-k-c0x00ffffff-no-rj)
Vložit
- čas přidán 17. 12. 2022
- For information on welding machines and peripherals, you can get more accurate answers by contacting the manufacturer.
↓↓↓↓↓↓↓
korea@nswel.com
Hello everyone.
There are many people who have a prejudice that laser welding machines are only used for thin metal welding.
Then, can laser welding be applied to thick metal welding work?
What is the penetrating power of laser welding machine?
Today's video contains amazing information about the penetrating ability of laser welding machines.
Thanks for watching and have a nice week.
#Penetration
#ability
#laser
#welding
#factory
#machine
#test
#steel
#crafts
#sheet
#tips
#And
#tricks
#hacks
#secret
#amazing
#DIY
#idea
#future
#Technology
#pipe
#HAGOJIBI
#videos
#weldingmachine
#laserwelding
#laserweldingmachine - Věda a technologie
Nice to see how good a laser welder works. Thanks for the awesome content. I have learned a lot from you.
First time I've seen a comprehensive video on laser welding that's not gimmicky, and seems like greate technology.
영상 잘보고있습니다ㅎㅎ 덕분에 nswel 회사에 시연도 가봤고.. 하고지비님 영상들도 관심있게 지켜보는중이네요!
혹시 관통이 가능하다는 사실체크느낌의 영상말고 실제 용접에 적용하는(퍼징,와이어피딩 포함하는) 영상 한번 보여주실수 있을까요? 2t~4t수준인데 rt테스트를 통과하는 퀄리티로요. 이건 영상으로 보여주는 업체나 유투버님이 없으시더라고요ㅎㅎ
Nice content and videos. Can you do a content to show penetration of T-join on two steel round tube (tube with notching) using laser weaving?
Also to show if there is any difference in strength between laser vs TIG/MIG on the T-Join.
오늘도 좋은 영상 감사합니다
추워진 날씨에 건강 조심하세요^^~
Interesting . Looks like we are all speaking steel ! Thanks .
Excelente tutorial maestro, buenos consejos y mejores demostraciones,el resultado final con placas de 4 m/m es perfecto, esperando las pruebas en tuberías con más grosor, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia)👌🤓😜
Eres un fenómeno ❤
Very impressive! Thanks for sharing!
исnользуется nри лазерной сварке защитный газ, если да то какой? идет ли nрисадочная nроволока? сварка цветных металлов, алюминия🤔?
I think laser works with CO2
Аргон. Как с проволокой, так и без. Цветные металлы можно варить. Китайские сварочники варят алюминий без проблем, в презентации. LightWeld показывают медь, в том числе медь к нерж стали.
@@valeriyvasilyev3113 сnасибо :)
thanks a lot.
Мы проварили за 1 проход 5 мм ) , только смысла в этом нет! Во первых скорость сварки низкая, во вторых пластинки быстро нагреваются, а листы, площадью в 3 метра медленно, скорость сварки падает ещё сильнее, третье, мощности лазерного сварщика не достаточно, четвертое, так лазерный сварщик долго не протянет. Перегрев сопла на большом расстоянии шва, передает высокую температуру на пистолет, система безопасности занижает мощность, что бы не перегреть пистолет.
Для производства такой вариант сварки не подойдёт! Одно дело пластины, другое изделия!
Швы с полным проваром черные и не красивые.
Но есть другой путь, который раскрывать не стану для общества )
Одно дело пластины, другое, настоящие изделия )
Насмотрятся и принимают за чистую монету материал, не зная о перечисленных выше проблемах. Я ещё не всё проблемы озвучил )
Hi. Could you film video about stainless steel and aluminum laser welding with wire feeder? Wire speed, movement technique, focus, beam width and power settings.
Super étonnant la pénétration sur du 4mm.
Dommage du prix de la machine,moi je reste sur le tig.
Merci pour cette vidéo
Do you have any experience with Nr 203 nickel intersheild? I did a few tests and waiting for results. It gave me a humble bundle of problems lol
Good stuff brother.
How is a laser welder on thicker materials? Like 1/4 " beveled with knife edge or open groove.
Thanks. Please show us some gap welding with laser.
영상 잘보고 있습니다. 알루미늄 맞대기 1.2 t 용접을 자주하는데 뒷면에 백플레이트 없이 가능한지요~백비드가 있어야 합니다~~
가능은 하지만 깨끗한 백비드가 필요하면 가스퍼징이나 백판을 사용하는 것이 좋습니다
Er det mulig å få pris for en slik håndholdt maskin?
Do you have something to make roots on pipes?
오 잘봤어요
Thank you for the video. As always, very helpful.
Welding of the plate in the lower position on the backing plate, of little use.
There is an interest in welding stainless pipe DN 50>, 2-3-4 mm, in shielding gas. At least in the turning position. If all is well, then try at 45 degrees in a fixed position.
P.S. Arbital welding works well with 2mm, but is more difficult with 4mm. Perhaps laser welding will do better. But the final result is needed, with a good formation of the back seam! So that the seam passes all the checks. Visual, x-ray, bending. What would be possible to do WPS for welding and apply this type of welding in production. Laser welding equipment is quite expensive and it is not advisable to use it for welding cheap metal structures. Useful for pipe welding (more expensive work).
If the tests are good, I am ready to make a test purchase and promote this manufacturer in Europe.
Какие металлы можно сваривать? Алюминий можно?
Большинство металлов поддаются сварке. Конечно, это машина, которая также может сваривать алюминий.
0.9t 티타늄 파이프도 용접이 되나요???
용접은 가능한데 가스보호에 대한 부분은 테스트가 필요할것 같습니다.
전에 금속공학박사님(용접기회사 간부시더라는)께 여쭤본결과 티타늄과 인코넬은 입열량이 적은 레이저용접이 훨씬 유리하다더군요ㅎㅎ 반대로 듀플렉스는 입열이 필요해서 좀 힘들다고하네요
👍👍👍
Muito bom trabalho. Seria interessante fazer a prova de resistência da solda pra saber o quanto é resistente.
Abraço
This is far better than the endless amount of laser welding reels I see on Facebook! 😏
Do you need laser rated goggles with a standard welding helmet?
Welding is possible without a welding helmet. However, it is recommended to use a protective helmet or goggles to protect your eyes.
@@weldHAGOJIBI I use a welding helmet set at about shade 6 with fibre rated laser glasses underneath (OD6 or higher at 1070nm). You only get one set of eyes, and the regs say you need fibre laser glasses at OD6 or higher, basically.
😊
Are you Korean? It seems like that you're not korean......
@CarbonBacon V I think like that cuz Hagojibi always writes the title which English translated in Korean. That's so suspected.
@@Myeong_ei 한국분 맞아요. 아이디도 그렇고 장비도 전부다 한국제품에 한글 나레이션이 기본인데요?
Still no details on the correct Personal Protective Equipment?
Full gloves like a gauntlet.
Full welding jacket long sleeves.
Important Normal welding shields not appropriate as they don’t protect from Infrared radiation.
Special Laser quality glasses that match the strength of the laser the machine produces.
To protect your face you need to wear a protective shield made of steel with a protective lens designed to protect your eyes and face from stray laser light being reflected towards your face and eyes.
Most laser welding is done inside a room with no windows.
This is the international standard for laser welding.
Many countries require that you have a licence showing that you have been trained.
IPG adds aluminium shielding and laser rated window to a welding helmet helmet. aluminium is lighter and harder for fibre laser to penetrate (high reflectivity and themal conductivity). I think that's overkill for normal usage, and haven't had a problem in a year of use, but I agree on the eye protection and personally use a helmet and glasses. I cringe when the Chinese videos show workers with no eyewear, and spraying invisible fibre laser light over bystanders and camera men.
hi my Master :)
I have question about this shop where may buy this laser-weld
it existe page in english or french language??
레이저용접기로 스테인레스 용접하면 부식은 없을까요?
네 열입력 과다로 인한 문제가 아니라면 레이저용접기와 스텐 부식은 연관이 없습니다