Cisco Wireless Access Point Factory Reset
Vložit
- čas přidán 20. 10. 2023
- This video shows how to reset a Cisco wireless access point to factory defaults. IOS based APs such as the 2802, 9120, 9166 can be reset by running the command 'capwap ap erase all' from the CLI.
APs can also be reset by connecting power to the AP and immediately pressing and holding the mode button for 20 seconds.
The steps shown in the video should work on many models of AP, such as:
AIR-CAP2702I-A-K9
AIR-CAP3702I-A-K9
AIR-AP2802I-A-K9
AIR-AP3802I-A-K9
C9105AXI-B
C9115AXI-B
C9120AXI-B
C9130AXI-B
CW9162-B
CW9164-B
CW9166-B - Věda a technologie
3702i Autonomous Mode. Beware that there is a bug in newer firmware that causes Error 404 when trying to save settings on the GUI. Just roll back to an earlier firmware. Cisco will never fix it. ap3g2-k9w7-tar.153-3.JF.tar will work. Also, you must go into console and set the secret pw and enable http after.
awesome job. super simple, straight to the point. thanks!
Glad it helped!
Thank you very much for the help.!! In a 1602 model, do you know what method would be used?
i need help with cisco air-ap2802i-e-k9 reset i have tried the putty mthode but i cant write the command
i forgot enable password in Air-cap1602I-E-K9 . how to recover enable password ?.