Acura RSX (2002-2006): Front Brake Pads And Rotors Replacement.

Sdílet
Vložit
  • čas přidán 1. 08. 2024
  • In this video, we will show how to replace Front Brake Pads and Rotors in the 2002, 2003, 2004, 2005, and 2006 Acura RSX.
    PRODUCT LINKS:
    1. FRONT Disc Brake Pad Set BOSCH BC621 QuietCast Premium Ceramic - Compatible With 2002-2006 Acura RSX - amzn.to/3Scv4wo.
    2. FRONT Disc Brake Rotor BOSCH 26010750 QuietCast Premium - Compatible With 2002-2006 Acura RSX - amzn.to/3lKKlZ4.
    TOOLS REQUIRED:
    1. WHEEL CHOCKS - MAXXHAUL 70472 Solid Rubber Heavy Duty Black Wheel Chock 2-Pack, 8" x 4" x 6" - amzn.to/3DTPyDZ.
    2. FLOOR JACK - Pittsburgh 3 Tons Aluminum Racing Floor Jack With Rapid Pump - amzn.to/3JHEttC.
    3. JACK STANDS - Pittsburgh 3 Ton Light Weight Aluminum Racing Jack Stands, Set of 2 - amzn.to/3RwdS4x.
    4. 1/2" BREAKER BAR - MAXPOWER 1/2" drive Breaker Bar 18 inch Flex Handle - amzn.to/3IdYXaG.
    5. 1/2" 19MM SOCKET - GEARWRENCH 1/2" Drive 6 Pt. Deep Impact Socket, 19mm - amzn.to/3IaBV4H.
    6. 3/8" 14MM SOCKET - GEARWRENCH 3/8" Drive 6 Point Standard Impact Metric Socket 14mm - amzn.to/3IxV81v.
    7. 3/8" 17MM SOCKET - TEKTON 3/8 Inch Drive x 17 mm Deep 6-Point Socket - amzn.to/3KiHQY7.
    8. FLEX HEAD RATCHET - GEARWRENCH 3/8" Drive 90 Tooth Locking Flex Head Teardrop Ratchet 11" - amzn.to/3HsWc5a.
    9. BRAKE PAD SPREADER TOOL - OEMTOOLS 25265 Disc Brake Pad Spreader, Piston Brake Caliper Compression Tool - amzn.to/3IvDpqz.
    10. HAND IMPACT DRIVER - Lisle 29200 3/8" Hand Impact Tool Set - amzn.to/3Iy7Pt9.
    11. BRAKE CLEANER - 3M High Power Brake Cleaner, 14 oz - amzn.to/3EFelwb.
    12. BRAKE CALIPER PINS LUBRICANT - Permatex 20353 Ultra Disc Brake Caliper Lube, 2 oz - amzn.to/42uahsu.
    13. 1/2" DRIVE TORQUE WRENCH - GEARWRENCH 1/2" Drive Micrometer Torque Wrench, 20-150 ft/lbs. - amzn.to/3I6ja3p.
    Acura RSX (2002-2006): Rear Brake Pads Replacement. Wagner Thermo Quiet Ceramic Brake Pads - • Acura RSX (2002-2006):... .
    Acura RSX DIY Playlist - • Acura RSX DIY .
    Thank you for watching! Please support us by liking the video and subscribing to the channel!
    You can also buy us a coffee! :) - www.paypal.com/cgi-bin/webscr....
    DISCLAIMER: All information displayed in the video is for entertainment and informational purposes only. You can't treat it as professional advice. Should you decide to act upon any information in this video, you do so at your own risk. When you click on links to various merchants on this site and make a purchase, this can result in this site earning a small commission. Affiliate programs and affiliations include, but are not limited to, the Amazon Associates Program.
    #MorozovAutomotive #AcuraRSX
  • Auta a dopravní prostředky

Komentáře • 45

  • @MorozovAutomotive
    @MorozovAutomotive  Před 4 lety +1

    PRODUCT LINKS:
    1. FRONT Disc Brake Pad Set BOSCH BC621 QuietCast Premium Ceramic - Compatible With 2002-2006 Acura RSX - amzn.to/3Scv4wo.
    2. FRONT Disc Brake Rotor BOSCH 26010750 QuietCast Premium - Compatible With 2002-2006 Acura RSX - amzn.to/3lKKlZ4.
    TOOLS REQUIRED:
    1. WHEEL CHOCKS - MAXXHAUL 70472 Solid Rubber Heavy Duty Black Wheel Chock 2-Pack, 8" x 4" x 6" - amzn.to/3DTPyDZ.
    2. FLOOR JACK - Pittsburgh 3 Tons Aluminum Racing Floor Jack With Rapid Pump - amzn.to/3JHEttC.
    3. JACK STANDS - Pittsburgh 3 Ton Light Weight Aluminum Racing Jack Stands, Set of 2 - amzn.to/3RwdS4x.
    4. 1/2" BREAKER BAR - MAXPOWER 1/2" drive Breaker Bar 18 inch Flex Handle - amzn.to/3IdYXaG.
    5. 1/2" 19MM SOCKET - GEARWRENCH 1/2" Drive 6 Pt. Deep Impact Socket, 19mm - amzn.to/3IaBV4H.
    6. 3/8" 14MM SOCKET - GEARWRENCH 3/8" Drive 6 Point Standard Impact Metric Socket 14mm - amzn.to/3IxV81v.
    7. 3/8" 17MM SOCKET - TEKTON 3/8 Inch Drive x 17 mm Deep 6-Point Socket - amzn.to/3KiHQY7.
    8. FLEX HEAD RATCHET - GEARWRENCH 3/8" Drive 90 Tooth Locking Flex Head Teardrop Ratchet 11" - amzn.to/3HsWc5a.
    9. BRAKE PAD SPREADER TOOL - OEMTOOLS 25265 Disc Brake Pad Spreader, Piston Brake Caliper Compression Tool - amzn.to/3IvDpqz.
    10. HAND IMPACT DRIVER - Lisle 29200 3/8" Hand Impact Tool Set - amzn.to/3Iy7Pt9.
    11. BRAKE CLEANER - 3M High Power Brake Cleaner, 14 oz - amzn.to/3EFelwb.
    12. BRAKE CALIPER PINS LUBRICANT - Permatex 20353 Ultra Disc Brake Caliper Lube, 2 oz - amzn.to/42uahsu.
    13. 1/2" DRIVE TORQUE WRENCH - GEARWRENCH 1/2" Drive Micrometer Torque Wrench, 20-150 ft/lbs. - amzn.to/3I6ja3p.

  • @Talreau
    @Talreau Před 10 lety +15

    this was an outstanding tutorial. no unnecessary talking just straight to the point. great!

  • @Bat_Boy
    @Bat_Boy Před rokem +1

    Simple and highly effective video. Now teach others how to do it. I’m tired of bad videos on CZcams.

  • @klos1971
    @klos1971 Před 6 lety +6

    You make it look so easy I think I’ll give it a shot ! 1st timer here hope it turns out ok💁🏼

  • @PhotoChoDotCom
    @PhotoChoDotCom Před 5 lety +5

    Thank you for the straight forward tutorial with no music!

  • @whitefang3856
    @whitefang3856 Před 6 lety +7

    Great write up, used it for my 05 RSX, only difference is when you used a 14mm, mine was a 12mm instead. Thanks for video.

  • @AaronSk8Man
    @AaronSk8Man Před 10 lety +4

    russians are NEAT in the mechanical field ! their work clean and efficient all the time ! nice vid man

  • @79supreme1
    @79supreme1 Před 7 lety +9

    Before pushing the brake piston back make sure to remove the brake fluid reservoir cover to relieve pressure and avoid spilling brake fluid that will overflow form pushing the piston back in.

  • @TheresFaith
    @TheresFaith Před 5 lety +3

    Very straightforward and helpful! Thank you I'm going to be saving a lot of money!

  • @brutalbasspro
    @brutalbasspro Před 4 lety +2

    It's how I figured the brakes would be done but thanks for the video I appreciate the straight up to the point ot was.

  • @YABUKIJOE2077
    @YABUKIJOE2077 Před 9 lety +2

    YOURE THE MAN

  • @midnightdarkchocolate
    @midnightdarkchocolate Před 6 lety +1

    High quality stuff👍🏾

  • @danschroeder9676
    @danschroeder9676 Před 5 lety +2

    This is great. Thank you!

  • @Tdawwn
    @Tdawwn Před 9 lety +2

    props from eastern canada

  • @guydickerson1677
    @guydickerson1677 Před 5 lety +2

    Very helpful, thank you.

  • @zombia4
    @zombia4 Před 10 lety +8

    i think the screaming child in the background was being kidnapped lol

  • @paulojimenez9904
    @paulojimenez9904 Před 8 lety +1

    great video thanks.

  • @luishernandez-munoz9585
    @luishernandez-munoz9585 Před 4 lety +1

    Best video so far!! Keep making videos !

  • @illlsmith
    @illlsmith Před 2 lety +2

    Thank you

  • @cainpaul08
    @cainpaul08 Před 7 lety

    Whats the proper pattern to bleed brakes on a base model 06 RSX?

  • @lbenger838
    @lbenger838 Před 4 lety +1

    Nice video, easy to follow, clear and educational. I would mention that it appeared that you didnt apply any lube to to sliding parts of the brake shoes. Also, it appears to me that you placed a wheel spacer on hub that stock wheels do not have or require. thanks .

    • @szabib2144
      @szabib2144 Před 2 lety

      Bout to do my pads on my RSX, and Permatex Anti-Seize lubricant is good to put on the back of the pads and the channel were the pads slide into correct?

  • @evakaminski847
    @evakaminski847 Před 9 lety +1

    spasiba Morozov!!!

  • @evakaminski847
    @evakaminski847 Před 9 lety

    my iz Ottavy!

  • @jchampagne11
    @jchampagne11 Před rokem

    Can you post a link to the break pads ?

    • @MorozovAutomotive
      @MorozovAutomotive  Před rokem +1

      FRONT Disc Brake Pad Set BOSCH BC621 QuietCast Premium Ceramic - Compatible With 2002-2006 Acura RSX - amzn.to/3Scv4wo.

  • @Alex42rus
    @Alex42rus Před 10 lety

    случайно не из Ванкувера? Номера хоть и не разглядеть, но вроде как наши БиСи-шные. У меня тоже RSX 2003. Сам всё тоже делаю на нём

  • @rasbeans51
    @rasbeans51 Před 8 lety

    why would you use an impact driver over a normal speed handle or screwdriver?

    • @brennansfund
      @brennansfund Před 8 lety +9

      +rasbeans51 go ahead and try to get that screw out with a regular screwdriver. Popeye grip

  • @bromandudeguy1995
    @bromandudeguy1995 Před 7 lety

    Is this base or type s?

  • @Fernando-xp3db
    @Fernando-xp3db Před 7 lety

    10:00

  • @apstlcpwr
    @apstlcpwr Před 10 lety

    You didn't bleed your breaks?

    • @scottbrixey6284
      @scottbrixey6284 Před 9 lety

      You don't need to...

    • @jamesimpallaria238
      @jamesimpallaria238 Před 9 lety +5

      apstlcpwr jesus christ...if you're going to act like you know what youre talking about, please do.

    • @angelmonroy9644
      @angelmonroy9644 Před 4 lety

      Scott Brixey yea don’t bleed the brakes and die lol

  • @sdotdgh52
    @sdotdgh52 Před 9 lety +1

    Great video thing you shouldn't jack the car from the front should do it from the side and if you doing side at a time no need to have whole front up I know it makes it easy god forbid it falls now you dealing with more problems great video tho

  • @XenomorphLV426
    @XenomorphLV426 Před 9 lety

    I would leave those screws off the rotor. Makes it easier next time.

  • @qaisirzaman8546
    @qaisirzaman8546 Před 9 lety

    Doesn't seem very environmentally friendly...