Video není dostupné.
Omlouváme se.

2019- up Chevy Silverado rear brake replacement

Sdílet
Vložit
  • čas přidán 17. 08. 2024

Komentáře • 44

  • @steevegmtech7326
    @steevegmtech7326  Před rokem

    Link for the brake pad
    amzn.to/42VURxE

  • @steevegmtech7326
    @steevegmtech7326  Před rokem

    link for the scan tool
    www.amazon.com/dp/B09XV8VR35/?tag=steevegmtec03-20

  • @lmarcu91
    @lmarcu91 Před rokem +7

    Scan tool isn't necessary. You can just put in service mode by holding the parking brake button

    • @steevegmtech7326
      @steevegmtech7326  Před rokem +1

      I found that out recently,I made a separate video about it on how to put it in service mode
      czcams.com/video/deHMChk1b3U/video.html

    • @melvinpaul9302
      @melvinpaul9302 Před 10 měsíci +1

      mine is a 2021 and could not get the service mode to come on no matter how many times I sat there and peddled the brake and pushed the button, how ever I do have a rear brake replacement option on the dash which can be reset

    • @steevegmtech7326
      @steevegmtech7326  Před 10 měsíci

      You are probably missing a step, I've used countless time on Silverado and other gm vehicle,always work,watch carefully

    • @steevegmtech7326
      @steevegmtech7326  Před 10 měsíci

      czcams.com/video/deHMChk1b3U/video.htmlsi=uA5kskx1gz47FQvn

    • @ngirardo86
      @ngirardo86 Před 6 měsíci

      @@melvinpaul9302you have to have the ignition on. Not running and not a short press that turns the radio on. You need to hold the start button with foot off brake for about 8-10 seconds. Then when the dash powers up you hold the brake and the parking brake button simultaneously until the brake service lamp starts blinking then remove your foot off the brake and then push the parking brake button again and you’ll hear them retract.

  • @budajr19
    @budajr19 Před rokem +4

    U failed to mention that the truck needs to be in brake service mode before compressing brake, I have all types of brake codes now

    • @steevegmtech7326
      @steevegmtech7326  Před rokem +3

      Sorry to hear that, but I did mention that in the beginning of the video that Do not attempt to do that job if you don't have a scan tool to put it in service mode

    • @budajr19
      @budajr19 Před rokem

      @@steevegmtech7326 missed that part when I skipped to the disassembly part of it 🤦🏽‍♂️

    • @steevegmtech7326
      @steevegmtech7326  Před rokem +1

      Take it to the dealer , they probably recalibrate it if it is not broken internally

  • @ngirardo86
    @ngirardo86 Před 6 měsíci +1

    You can easily put the truck in service mode WITHOUT the dealer. I’ve done it twice now my friend.

  • @vanceplace1349
    @vanceplace1349 Před 2 měsíci

    Taking it to the dealer is never gonna happen. There’s always a way around.

    • @steevegmtech7326
      @steevegmtech7326  Před 2 měsíci

      That's the way
      www.amazon.com/dp/B09XV8VR35/?tag=steevegmtec03-20

  • @melvinpaul9302
    @melvinpaul9302 Před 10 měsíci

    funny how ppl skip past on how and if the caliper just goes in with the use of a C clamp guess got to figure this out myself

  • @oxiancabrerabenitez145
    @oxiancabrerabenitez145 Před rokem +1

    Bro you miss the only part I was trying to see how the f. This pistón go back😂😂😂

  • @bjornsnoskoter4204
    @bjornsnoskoter4204 Před rokem

    Great video but you don’t show the caliber reassembly, does the piston sit flush to the bore? Mine still sticks out 1/8 “ and will not retreat any further, I also have seen that the truck has to be running when you put it in brake service mode…I cannot fit the caliper over the two new pads, it’s about an 1/8” shy of clearing the new pads…also did you remove the e brake motor to reinstall the calipers? It seems like that’s necessary, I do appreciate the video but showing the tricky parts would really add to it, Thank you for posting!

    • @steevegmtech7326
      @steevegmtech7326  Před rokem

      Thanks for watching 😊 ,i made that video a while back, I'm aware that video is not perfect ,I will do another one with the tips and tricks, it is ok for the piston to stick out a little bit, the ebrake motor doesn't have to be removed from the caliper.hope that help

  • @papabits5721
    @papabits5721 Před měsícem

    You must work for a dealer, this is why we watch vids so we don't have to go to the dealer, and get bill 150 $ for sman tool use.

  • @melvinpaul9302
    @melvinpaul9302 Před 10 měsíci

    whats up with Chivy making year to year changes...don't it save corp money to keep what works

  • @danielb-c9100
    @danielb-c9100 Před rokem

    What is the best score driver to remove the steering wheel air bag

    • @steevegmtech7326
      @steevegmtech7326  Před rokem

      What year? Model?

    • @steevegmtech7326
      @steevegmtech7326  Před rokem

      Most of them you need a pocket screw driver

    • @danielb-c9100
      @danielb-c9100 Před rokem

      What about t handle Allen key I have teeny screwdrivers that are not Is lawn enough

    • @steevegmtech7326
      @steevegmtech7326  Před rokem

      It would've to be very small

    • @713ROBLO
      @713ROBLO Před rokem

      What kind of scanner you use to put a 2021 gmc Yukon a rear brake pad in service mode?