Throwing “ONE PIECE Flash Lid Jar” Version II / on the Potter’s Wheel @ Alchemyceramic
Vložit
- čas přidán 24. 01. 2024
- For today's project, I'm revisiting the creation of the ONE PIECE Flash Lid, similar to a video I shared over a year ago.
In the previous style, there was a gallery at the base pot to accommodate the lid.
In today's approach, there's no gallery at the base pot.
Although seemingly minor, as a maker, I need to make subtle adjustments in the process.
Please try and let me know your thought.
#onepieceliddedjar
#closedformpot
#pottery
#potterywheel
#wheelthrownpottery
#handmadepottery - Jak na to + styl
Thank you so much for your kind patient instruction, I’ve been potting for 30 years and alway shied away from lids, this put a spring in my creativity😅❤❤❤
Thank you for your comment 😊. Since I’ve started to use this technique Lidded Pot became one of my favorite subjects. I hope you will be the same.
I made one using this method recently and it worked very well! Except I cut the inner ridge at the top so the lid sits outside the flange instead of inside. I’m amazed how flat you were able to get the lid (mine is a dome), but it was my first attempt. I also miscalculated where to start curving inward so the bottom is shorter than I wanted. I’ll try it again using your top third method. Thank you for creating such fantastic videos either way detailed instructions.
Thank you for your comment Denis😊. I’m so glad to hear you tried this. To make a flat top there are few small adjustments. I will make a flat top version video one day.
@@AlchemyCeramic I will definitely look forward to that. Thank you.
So lovely!! I've made pots with your other method so now I need to try this one, too! Thanks for such good instructions AND for showing the finished pots at the end -- so appreciated.
Nice to hear from you Penny😊 Your comments encourage me to make more videos.
I love the detail of every step and the explanation of why you are doing it. Thanks so much
Thank you for your comment Lynn😊 I’m trying to make my videos the one I wanted to watch when I started pottery. I’m glad this video is working for many other fellow potters!
Thanks again and also for showing your hand positions clearly and why you are doing it. Going to try some things today! Have a nice day 😊
I am so glad I found your CZcams page. : ) You are a good potter!! and now you are teaching me things I want to know about jars with lids etc. Thank you!! : )
Thank you for your comment 😊. I’m happy to hear my channel is useful for other potter!. I’ll post more videos.
thank you for your videos! of all the pottery videos online, I find yours the most helpful 🙏
Thank you for your kind comment Meiliew😊. Your comment becomes my motivation for video making.
Thank you for your great instructions and I enjoyed it. It was beautiful
Thank you for your comment 😊.
Thanks for such a beautifully clear explanation.
Thanks very much for this tutorial. I'm going to try it out today!
Thank you for your comment 😊. Have a good throwing!
Beautiful thank you for showing us how it’s done 😊
My pleasure 😊 Please try it!
Beautiful 🤩. Thank you for the wonderful step by step
Thank you for your comment 😊. please try and let me know how you think.
Thank you for your very helpful videos. Beautiful jar cannot wait to try.😊
Thank you for your comment Melanie😊. please let me know when you made it !
So lovely. Thanks for sharing ❤
Thank you Tanya😊
Always happy to see your videos. I am going to give this a try !
Thank you for your comment Rebeca😊 Please let me know when you made this! I’m looking forward to hearing your experience.
I need to practice this method more. Thank you for demonstrating. Do you mind sharing what kind of wax you use? I like that it is so thick.
Thank you for your comment Pamela😊 This wax is Mayco wax. ONE PIECE technique is my favorite. please try it.
Lovely, thanks for sharing! I wonder if you could share a link or name of that spinny tool you used for trimming the lid! Thanks 🙂
Thank you for your question 😊. www.aliexpress.com/w/wholesale-pottery-spinner.html
please try this.
You fire at cone 10, right? I love your glazes - do you make them? could you also share about those one day?
Thank you for your comment Alethia😊. My firing is cone 6 and hold time is 30 minutes at the top temperature.
Does it sound low for you? I recently had a test at cone 8 and some of my glaze didn’t work well so I’m happy with cone 6.
Glaze recipe! Some recipes are not my own recipe so I can’t share but I have my own recipe which I can share happily. I’m planning to video which includes the glazing so I will share my recipe at that point.
That sounds awesome. I'll look forward to that too.
I love watching your videos, it's like watching magic. I have been doing a handbuilding class, but I love to watch work at the wheel. This jar has a beautiful shape. I had a question! I noticed you made a hole in the wall to keep the walls straight, how did you close it during trimming - was it with the kidney, I can see a small mark after trimming but perhaps it is closed? I think I would keep biscuits in a jar like this :)
Thank you for your lovely comment Malcolm😊. The pin hole can be closed anytime during the trimming or after the trimming . You can close with the kidney or smooth with finger. The jar will still shrink so this small pin hole will be closed naturally so you need to vanish the visible part. You may think the trapped air may cause a clack if you dry as lid on. In my experience once the lid is separated the clack doesn’t happen while the drying process. But if you are worried you can keep the pin hole until the jar becomes completely dry then fill the hole. This tiny hole will be covered by glaze also.
Do you need to make a hole again before bisc firing to let the moisture out because it has the lid on?
Thank you for your comment Jane😊 You don’t need to make a hole for the bisque firing. I assume your question is for the bisque firing, if so the pot should be bone dry for the firing so there is no moisture inside.
If your question is about during the drying process between after the trimming until the bisque firing you still don’t need a hole as the pot has shrunk enough already so even you put the lid back on the air inside doesn’t make a crack.
I hope I answered your question.
When do you close the hole? Is it just sealed up with glaze?
Thank you for your question 😊 The air vent hole can be closed when you are trimming. The shrinkage after the trimming is smaller so you can close the lid to dry the jar. It is better to dry as closed. The lid and the body fit well.