DIY: Portable Dual Woofer Bluetooth Boombox Speaker

Sdílet
Vložit
  • čas přidán 13. 09. 2020
  • Homemade Portable Bluetooth boombox, subwoofer car design:
    Battery 8A: bit.ly/34m9v5z
    Tweeters: bit.ly/2KKkRZ5
    Amplifier: bit.ly/3vl4jy4
    Passive radiator: bit.ly/3dd3Kcc
    Crossover: bit.ly/2ApnACG
    6S meter: bit.ly/3l92JGf
    Switch: bit.ly/3bStuea
    Power jack: bit.ly/3bTMiJI
    Connector: bit.ly/32fkA5L
    Rubber feet: bit.ly/31SREA1
    4ohm Speakers: amzn.to/44gKNQR
    "Wire holder": bit.ly/3P4En0R
    -Width 50cm, height 24cm, 18/24 depth cm
    -Carpet applied with contact glue
    -Subwoofer car style design
    -Charging at 25 volts
    -Schematic at 12:39
    Copyright free music list:
    More Plastic - Champion [NCS Release]
    Star Party - Legends[NCS Release]
    RetroVision - Hope [NCS Release]
    Raven & Kreyn - Bubble [NCS Release]
    Elektronomia - Heaven [NCS Release]
    Dark Heart - Crash Test Dummy [NCS Release]
    BH - Holding On [NCS Release]
    Jonas Wang - Shining [NCS Release]
    (-LiitoKala 24V 6s 4A 6A 8A 10A 18650 battery pack 25.2V 12Ah Li-ion battery battery Charger
    -AIYIMA Bluetooth Amplifier Board TPA3116 Amplifiers 2*50W Bluetooth 5.0 Receiver Support AUX Serial Command Change Name Password
    - 60W 2 Way Audio Speaker Frequency Divider Treble Bass Crossover Filter For Bookshelf Audio Speakers DIY ब्लूटूथ स्पीकर कैसे बनाये
    Start to finish full video
    -Dayton Audio DC160-4 6-1/2" Classic Woofer Speaker
    How to carpeting Subwoofer box, apply carpet, car audio, big excursion passive radiators )
    #DTekDIY
  • Jak na to + styl

Komentáře • 481

  • @DTeK
    @DTeK  Před 3 lety +43

    Check video description for more infos, thank you for watching :) parts list :
    Battery 8A: bit.ly/34m9v5z
    Tweeters: bit.ly/2KKkRZ5
    Amplifier: bit.ly/3vl4jy4
    Passive radiator: bit.ly/3dd3Kcc
    Crossover: bit.ly/2ApnACG
    6S meter: bit.ly/3l92JGf
    Switch: bit.ly/3bStuea
    Power jack: bit.ly/3bTMiJI
    Connector: bit.ly/32fkA5L
    Rubber feet: bit.ly/31SREA1
    4ohm Speakers: amzn.to/44gKNQR
    "Wire holder": bit.ly/3P4En0R

  • @ljaysperspective1775
    @ljaysperspective1775 Před 3 lety +45

    It looks so well built it appears manufactured. Nice job.

  • @CharlyBmwSrr
    @CharlyBmwSrr Před 2 lety +3

    Me encanta ver a gente profesional desarrollando sus proyectos enn los que podemos ver esa aptitud conseguida con el esfuerzo y el empeño de aprendizaje a lo largo de su vida demostrando lo en su manera de trabajar y ejecutar paso a paso de manera meticulosa y perfecta. Personas así ya no hay muchas

  • @sergeyandrusenko4359
    @sergeyandrusenko4359 Před 3 lety +1

    Хорошо когда руки из нужного места растут... Super!!!

  • @madwithspeakers
    @madwithspeakers Před 3 lety +17

    Loving the design and effort you put in to this . Keep it up :)

  • @ryanmalin
    @ryanmalin Před 3 lety +7

    Very clever design using the passive radiators.

  • @yroslav195
    @yroslav195 Před 3 lety +7

    Можно улучшить. Всю электронику поставить в отдельный бокс внутри колонки. Внутри акустический короба проложить звукопоглощающие маты. Звук станет намного чище.
    За работу 👍

  • @virzalanimation3961
    @virzalanimation3961 Před 3 lety +9

    I hear the sound test on my Mifa A10+ and its sounds very clear and high clarity. And the bass also has high quality. Impressive!!

    • @DTeK
      @DTeK  Před 3 lety +2

      Thanks, i realy like those woofers, they sound good

  • @rallyecupra2
    @rallyecupra2 Před 3 lety +6

    Wie immer bei Dir, sehr gute Arbeit! Ich denke die Box hat einen heftigen Bass, es sieht so aus als hätten die Passivmembran viel Arbeit 😅

  • @JViello
    @JViello Před 3 lety +15

    Nice job...based on what I can hear through my (Very expensive and accurate) headphones/DAC I think it can benefit from adding more weight to the passive radiators. They seem to be tuned too high. Just run a frequency sweep on the box and when you see the woofers flatten out and the radiators doing work, you know you've found their FS. Sometimes not much is needed...a few layers of duct tape on the inside is enough to do the job. Personally I would have preferred a port over radiators. (I only use radiators when space is critically small, that's where they shine.) The issue I constantly see is people not tuning their radiators. It's just like a port, it has a resonant frequency and need to be tuned to the woofer and box volume!

    • @DTeK
      @DTeK  Před 3 lety +2

      Thanks, might try to do some PR tuning in the future

  • @Davidslabofficial
    @Davidslabofficial Před 3 lety +6

    Amazing build 🔥🔥

  • @MrGimli2
    @MrGimli2 Před 3 lety +8

    Love the hardstyle

  • @user-kp1mq4ry9y
    @user-kp1mq4ry9y Před 3 lety

    Просто БОМБА💣💥супер.

  • @edmalivao841
    @edmalivao841 Před 3 lety +1

    Waou très beaux travail 🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼

  • @sajibhassan6568
    @sajibhassan6568 Před 3 lety +4

    That's Awesome man!!!

  • @user-cn8nr1we6x
    @user-cn8nr1we6x Před 3 lety

    Вот это колбасит!!!!! Супер!!!!!

  • @ralseichanuwu
    @ralseichanuwu Před 3 lety +85

    Thats what i call a boombox

  • @migueldaham4975
    @migueldaham4975 Před rokem +1

    Simple and very loud. Deserves a 👍 👌

  • @bielmix8650
    @bielmix8650 Před 3 lety +4

    i loved it,thats very cool!

  • @Mahan150
    @Mahan150 Před 6 měsíci +1

    OMG. Too good, three good. No words to appreciate. Very fine and quality work. Beyond this I am speechless. God bless you and your family. Well photographed. Never felt bored. Quick video. It's a good tool for practicing it.

    • @DTeK
      @DTeK  Před 6 měsíci

      Thanks, glad you liked :)

  • @jeremyarnold629
    @jeremyarnold629 Před 3 lety +1

    Very nice build, clean.

  • @mbonfimandrade
    @mbonfimandrade Před 3 lety

    Perfeita parabéns

  • @user-eu3vk9ws5s
    @user-eu3vk9ws5s Před rokem +1

    everything is thought out to the smallest detail, very cool!

  • @cybernaab
    @cybernaab Před 3 lety +2

    Nice i like it alot, good quality woofer, although that passive radiator flexes a bit to much maybe glue some weights to the passive radiator to tune it

  • @marcelinofranca4838
    @marcelinofranca4838 Před 3 lety +1

    Caixa boa tá de parabéns

  • @user-ke8hm4nl8b
    @user-ke8hm4nl8b Před 2 měsíci

    вы лучший, так как показываете, как правильно все установить.Спасибо.

  • @gyulaacs7085
    @gyulaacs7085 Před 3 lety +3

    Perfekt!

  • @vader.editz.86
    @vader.editz.86 Před 3 lety +5

    That’s impressive. 🤘🏽

  • @cleber2016
    @cleber2016 Před 3 lety +2

    Ficou muito top. Parabéns!!

    • @brunovaz5514
      @brunovaz5514 Před 3 lety

      Se vc acessar os links dos produtos que ele usou vc retira seu like na hora.

    • @srpaulo2748
      @srpaulo2748 Před 2 lety

      @@brunovaz5514 oq importa e que a caixa está legal e bonita cara

  • @adrianboveguilarte8819
    @adrianboveguilarte8819 Před 3 lety +2

    Buen trabajo💪👍🏻🙏

  • @96wasif
    @96wasif Před 3 lety +2

    I can feel the bass man 😎 great work 👌🏻✌🏻

  • @ElectronicLokaya
    @ElectronicLokaya Před 3 lety +1

    supper good job

  • @user-bz2ct8jx8j
    @user-bz2ct8jx8j Před 2 lety

    Это пока лучшее что я видел на Ютуб

  • @d5_p4770
    @d5_p4770 Před 3 lety +5

    Excellent project! Great job! 👍 In the future can you make a louder portable speaker, using UPS battery? 😉

    • @PYR069.
      @PYR069. Před 3 lety

      they are almost the same ups batteries are lead and thise are li-ion batteries

  • @LEXUANCUONGTV82
    @LEXUANCUONGTV82 Před 3 lety

    Chào a chủ và chào tất cả các bạn! Mình là LE XUAN CUONG TV

  • @medve_original
    @medve_original Před 3 lety +1

    Nice Work!

  • @COD-OTIMIZADO
    @COD-OTIMIZADO Před rokem

    Ótimo trabalho

  • @A.M103
    @A.M103 Před rokem +1

    What a excellent boomy sound boom box

  • @suslik4256
    @suslik4256 Před 3 lety +1

    Хорошая работа : )

  • @SHVEDsax
    @SHVEDsax Před 2 lety +1

    Amazing result man!

  • @speakerbr5792
    @speakerbr5792 Před 3 lety +5

    Ficou muito dahora tem que fazer pra vender

  • @xrthemi8781
    @xrthemi8781 Před 2 lety +1

    Awesome! Exactly what I was looking for!! Great Job!

  • @Rick40867
    @Rick40867 Před 3 lety +1

    Awesome Man Ultimate

  • @Mr.boxxchevy
    @Mr.boxxchevy Před 3 lety +1

    Nice work man

  • @Knkasiatic
    @Knkasiatic Před 3 lety +1

    very good music box job

  • @fishingwithfilitsa
    @fishingwithfilitsa Před 3 lety +1

    Your work is very nice

  • @luismitchell9393
    @luismitchell9393 Před 2 lety +1

    Bro,tou are a magician, that was awesome, i love to be able to do this as i am a decent carpenter but the electrics puts me off

  • @andrewgrabber7469
    @andrewgrabber7469 Před 3 lety +2

    It need metal corners at the edges of the box. Cool!

    • @DTeK
      @DTeK  Před 3 lety +1

      easy to add ;)

  • @rogers491
    @rogers491 Před 2 lety +1

    This guys a master

  • @lifeofshelly45
    @lifeofshelly45 Před 3 lety

    amazing work

  • @feelingawoman5783
    @feelingawoman5783 Před 3 lety +3

    Wooooow very beautiful 😍😍😍😍

  • @DIYABR1880
    @DIYABR1880 Před 3 lety +1

    the test is very good.

  • @LutzMowinski
    @LutzMowinski Před 3 lety +3

    Holy crap, I want that thing :D

    • @PYR069.
      @PYR069. Před 3 lety

      he makes them for personal use only

  • @okangon7100
    @okangon7100 Před 3 lety +12

    This had the best sound so far. How long does the battery last? Thank you

    • @DTeK
      @DTeK  Před 3 lety +7

      Thanks, depends the volume, from one full day to 3 weeks

    • @ghost1877
      @ghost1877 Před 2 lety

      @@DTeK Will you make your own brand for sale in the future?...

  • @tipstricksss1453
    @tipstricksss1453 Před 3 lety

    It may be the video audio but the bass sounds like its struggling and those woofers are working hard. Good video.

    • @DTeK
      @DTeK  Před 3 lety

      Thanks, in the video we can hear some noise when the bass kicks but its the tripod jumping on the table, it stops while i lift the speaker as you can see here 16:36 , it was also recorded in maximum volume with the camera microphone at 50cm from the speaker

  • @Dilson1327ify
    @Dilson1327ify Před 3 lety +2

    Very, Very good.

  • @rammeek_5thegenius866
    @rammeek_5thegenius866 Před 3 lety +3

    This is amazing bro

  • @TechnicalDeb2007
    @TechnicalDeb2007 Před 3 lety +1

    Powerful Bluetooth Speaker

  • @joeysalinas6047
    @joeysalinas6047 Před 3 lety +1

    I want one.... nice job

  • @nathbeste1216
    @nathbeste1216 Před 3 lety +2

    I’ve made similar designs to this but I use tweets on back and front for 360 audio and I also place a rubber membrane inside to lower the bass frequency

  • @xfruz7262
    @xfruz7262 Před 3 lety +2

    Oh my God I'm impressed with the sounds and looks nice
    Nice job i like it

    • @DTeK
      @DTeK  Před 3 lety +2

      Thanks

    • @rickross368
      @rickross368 Před 3 lety +1

      Why you put the fake speakers on each end? Waste of time

    • @Fritz.PlayzZz
      @Fritz.PlayzZz Před 3 lety +1

      @@rickross368 lol😂😂😂😂

    • @BRC21
      @BRC21 Před 3 lety

      @@rickross368 called passive radiators they add bass idiot

    • @PYR069.
      @PYR069. Před 3 lety

      @@BRC21 lol😂

  • @jasonbovey9480
    @jasonbovey9480 Před 2 lety

    I love this! I see these companies doing briefcase, speakers and even in a gun can old school that the military uses. For the bullets. And none of them have subwoofers. What a waste. If I'm going to spend $500 or even 400 bucks on a great speaker I wanted to have some bass. Even one of those subwoofers would be fine in one of those briefcases just make it a little bit extra heavy duty lol

  • @user-fh4hx8in8f
    @user-fh4hx8in8f Před 2 lety

    Красава зделал всё сам, не тошто некатырые покупают

  •  Před 3 lety +2

    So beautiful ... 👍👍👍👍👍

  • @adrianamodz5375
    @adrianamodz5375 Před 2 lety +2

    Woow I liked the ending super ibcreible

  • @jeussmyrrho9119
    @jeussmyrrho9119 Před 2 lety +1

    So cool!!! 🔥🔥🔥

  • @imseanmross
    @imseanmross Před 2 lety +1

    Very nice job 👍

  • @matthewthompson76
    @matthewthompson76 Před 3 lety +1

    Nicely done

  • @alfredopulvera9759
    @alfredopulvera9759 Před 3 lety +2

    Cannot hope of getting one but... i enjoyed watching this kind of build cause I'm a basshead and I love it!

  • @សុខជានវីដេអូ

    idea verey good brother

  • @mrrinbow3645
    @mrrinbow3645 Před 3 lety +1

    Агонь просто

  • @leegoldeneagle9003
    @leegoldeneagle9003 Před 3 lety +1

    Very nice 👍. Work. Love. It. So. Cool 😎. Lee

  • @albertov3784
    @albertov3784 Před 3 lety +2

    Brutal 😎😎

  • @extazyy1529
    @extazyy1529 Před 2 lety

    damn, if i had 500$ and i would need to decide, jbl boombox 2 or this, i would 100% pick this and give another 500$, great job!

  • @jacquesgouws
    @jacquesgouws Před 3 lety +1

    Awesome!

  • @ajoandespul1778
    @ajoandespul1778 Před 3 lety

    Keren bos qu👍

  • @ahmadfadly9170
    @ahmadfadly9170 Před 3 lety +2

    plain and super simple design....
    I love it!!

  • @hendranandradrone7064
    @hendranandradrone7064 Před 3 lety +1

    Its good friend 👍👍

  • @barto0136
    @barto0136 Před 2 lety

    Good project !

  • @mettheusberundang8686
    @mettheusberundang8686 Před 7 měsíci +1

    Nice to do speaker amazing!!!!❤

  • @sadmanhasan9572
    @sadmanhasan9572 Před 2 lety

    professional work

  • @farielofficial
    @farielofficial Před 3 lety +1

    Thanks videos

  • @Ahmed-qz1ov
    @Ahmed-qz1ov Před 3 lety +1

    Bro amazing subwoofer system

    • @theejoeylee
      @theejoeylee Před 3 lety

      This is a speaker system. A subwoofer plays subsonic frequecies. That means below human hearing of 20HZ.

    • @Ahmed-qz1ov
      @Ahmed-qz1ov Před 3 lety

      Ok

  • @savitajha9379
    @savitajha9379 Před 3 lety +2

    You should increase the mass of the passive radiators anyway good work 👍🏻

    • @DTeK
      @DTeK  Před 3 lety +1

      Thanks, i will try different weights in the future

  • @MarkErikEE
    @MarkErikEE Před 3 lety +1

    Nice job - I really like the attention to details. What if you add weight to the radiators? Will it improve the sound? More dampening maybe?

    • @DTeK
      @DTeK  Před 3 lety +1

      Thanks, yes, dampening will change the bass values for sure, about tunning the PR´s is something that i never did before but this speaker is the ideal to do some testing with the PR´s.

    • @lakers.714
      @lakers.714 Před 3 lety +1

      Need ebay account star selling ur bom boxes bro i buy one for sure

  • @richgarland6170
    @richgarland6170 Před 2 lety

    Great job mate looks awesome!! Do you have a lot of experience making these kind of speaker boxes ?

    • @DTeK
      @DTeK  Před 2 lety

      thanks, i have done a few of them

  • @ElectronicLokaya
    @ElectronicLokaya Před 3 lety +1

    good job 🔥🔥🔥🔥🔥🔥🔥🔥🔥

  • @jackwang9799
    @jackwang9799 Před 2 lety

    I recommend an inexpensive, very loud speaker that I've had for a year now. He still works very well. ~~~~ recommends the ding dong speaker with lights

  • @steveo5174
    @steveo5174 Před 3 lety +11

    Wow, those passive radiators are getting smashed!

    • @Flowxing
      @Flowxing Před 3 lety +5

      Yes because ther Cms is waaaay too low. Everybody seems to be making bluetooth speakers without even knowing what T/S parameters are.

    • @hyperdriverr
      @hyperdriverr Před 3 lety

      Those paper cone daytons perform way better than you would think. Their motors are twice as strong as some woofers in the $90 range.

    • @PYR069.
      @PYR069. Před 3 lety

      @@hyperdriverr 90$ !! really?

    • @hyperdriverr
      @hyperdriverr Před 3 lety

      @@PYR069. Yeah, they trade xmax for a stronger motor. I don't consider it a negative but if you want decent output below 40 hz you have to port these, but a lot of woofer would run out of xmax in a sealed box. One extreme example would be a precision power phantom 10. lots of xmax but the motor is so weak compared to a dayton dcs255. another similar woofer to a dayton dcs255 is the jbl gto 1014. Same story with it, strong motor with low xmax but it works.

    • @PYR069.
      @PYR069. Před 3 lety

      @@hyperdriverr Thanks 😊

  • @J0HNWICK
    @J0HNWICK Před 3 lety

    Toooooo much work!

  • @Ssawekboomboxdiy
    @Ssawekboomboxdiy Před 3 lety +1

    Cool Boombox

  • @thejamaicansenpai1698
    @thejamaicansenpai1698 Před 3 lety +2

    OMG the is effing awesome. By any chance do you have a store? I know this is a DIY to help us do it our self but I'm not that great at stuff like this. I would be more than happy to buy this one. Perfect for me to jam out while working on my car.

    • @DTeK
      @DTeK  Před 3 lety

      Thanks, glad you liked, i build them only for my personal use

    • @mackizzer2302
      @mackizzer2302 Před 3 lety +1

      U can be great at anything u want to be, literally, never doubt urself, what ever u like or want to know, learn how to do it now, don’t wait, wish I was like this all my life, your going to make mistakes like anything u learn, but unlike school, u can teach urself things u will need in life, not bullshit we never going to use

  • @nachoalonsorodriguez8609

    That's waterproof :)

  • @mrrinbow3645
    @mrrinbow3645 Před 3 lety

    Красава

  • @LeeSangLVS
    @LeeSangLVS Před 3 lety +1

    Good 👍

  • @nhenaow7970
    @nhenaow7970 Před 3 lety +5

    Great work

  • @trysomething6420
    @trysomething6420 Před 3 lety

    Boss excilent

  • @laszlotoman9378
    @laszlotoman9378 Před 3 lety +2

    Hello!
    I cant find the same speakers on the amazon or aliexpress. May you help me to find other in same specification?

  • @timothyviesca
    @timothyviesca Před 3 lety +1

    Love the build! Quick question, what is the part between the switch and 6s meter?

    • @DTeK
      @DTeK  Před 3 lety +1

      Thanks, its a momentary push button to turn the 6s meter on

  • @c2ashafiqazli258
    @c2ashafiqazli258 Před 3 lety +3

    Good tutorial! May i ask how long the boombox runtime on 1 charge?

    • @DTeK
      @DTeK  Před 3 lety +4

      Hello, depends the volume, but it will last from one full day to one week :)