This is the beginning of a Overheating PS3 By:NSC
Vložit
- čas přidán 2. 10. 2020
- Hi Guys :)
This PS3 was overheating and somewhen it would get an YLOD.
On this Video i just fix that all and now this PS3 will last again for some longer time :)
Have fun, feel free to leave me a comment and dont forget to Subscribe!
PEACE
NSC - Hry
Very nice! I have a 60GB A01 & I replaced the thermal paste & pads almost 6 years ago. I never delidded the heat spreaders, but it idles 60C @ 28% fan speed.
Hehe Nice, but the time will come where you gonna need to delidde it 🙈
soo good to see so much PS3 love and your pure joy working on it.
hehe Thank you so much ;)
I'm a smoker, I can always tell, just by the smell of it even before opening it that it has been around cigarettes smokers. I find that if it smells like an ashtray you can see the airflow from the nicotine stains!! Love Videos!! your the best NSC!!!
Yes, that's right to, had a lot such consoles ^^ Than you bro.
Im just preparing for my first IHS removal and this video was a great help to me. I changed thermal compound on fan heatsinks before.
Ok bro, take care and wish you gonna be able to do it nice and sexy 😉
Love the details given and the work you do. What a masterpiece
Yes it really is. Thank you so much
Thank you for all that you do. I’m trying to absorb as much of this as possible. I have a unopened A01 that still works! That some day I will go through. I don’t even use it because I have a PS2 and my original PS3 slim.
Yeah, better don't use it as long you have not delid it 😀
I always wondered why you would reply to brazilians in portuguese. I'm a brazilian who's spent some time in germany when I was way younger, and I really dig your videos. It's got that nostalgic feeling of trying to comunicate in english with the germans + the fact you work on ps3s (which was all the rage when I lived in Leverkusen). Just writing this out to let you know I get a lot of inspiration to maintain my ps3s in good working conditions from your videos. Keep up the good work. Liebe Grüsse aus Brasilien
Olá Mas eu sou português 🤗✌
@@NSC-Modz eu vi pela sua resposta a outro comentário.
@@18negoo haha, muito bem, você e sempre bem vindo ;)
Friend your videos are never long! You answer all the questions that would definitely be asked in a PS3 repair forum. Always very informative! Thanks!
Thank you so much :)
1:51:41
Saturday evening here in Russia, and what a better way to spend it than to watch some high action-packed NSC-style movie with your girlfriend! Already have my cup of tea and ready to roll!
Yeah, wish you a nice weekend :)
Far better than Netflix indeed.
@@goldthwaithigginsondorr2005 Hehe great :)
Ladies love that thick German accent.
@@mbe102 xD German, Portuguese accent 😅
Ive heard that the digital store from ps3 are gonna shut down , so rip but cool video i have super slim one.
Have a drink everytime NSC Modz says "OZU".
Cheers man ^^
Wow this video is amazing! Thank you soo much for informing the retro gaming community with proper technics of disassembly and Warnings on what happens if you don’t properly take care of it 😇🙏
Would you be willing to show me where I can get one of those knife tools that you used to remove the cpu glue? 🙂
Any chance you can tell me what that tool is called? 🙏
This is my own tool, called NSC's PS3 IHS Tool. New ones are in production
@@NSC-Modz ooooh do you sell them then? Because I’m getting ready to change the thermal paste on two PS3 I bought locally and this would make life a lot easier haha 🙏
great video! you have no idea how helpful this was to watch! i didn't even realize it lasted 2 hours.
do you have a link to your page where you sell ps3s?
Thank you so much. My page is mostly here on my CZcams community. For now I'm not selling PS3's any more, but if you like one just tell me 😀 maybe i sell you one of my PS3's
I like your videos so much. You are creating interesting and useful content. And you must be a cool guy, i like the way you speak. But i think the videos are too long. If they were shorter i would watch the whole video but if its too long i am just seeking forward often. But thats just my opinion 😇😇
I understand, some videos gets longer while im doing it, but i try to keep it shorter in future ;)
Long but great video! 🤩
Yeah, would i do it be a short video, it would make no sense :)
@@NSC-Modz Longer video more stuff we learn from You.
This man is a master of the craft.
You welcome 😆
I think I know what Christmas present to my self is going to be! You ship your NSC PS3's to North America United States friend?
Sure my friend :)
Just do it, the guy knows what his doing, sended my second ps3 for IHS removal, better not wait cause ps3 must be protected at all cost :D
Great video ! might upgrade my ps3 to a SSD soon !
Yeah, but not really worth with the ps3 ^^ Games will load a bit faster yes, but not that fast like with a computer ^^
@DeeJay1210 right, i got a surprise video about that soon ^^
@DeeJay1210 yeah, wirst es lieben✌
@DeeJay1210 Hehe Thank you so much!
Thanks so much i plan on doing this for my slim playstation.
Yeah, listen to the fan and be sure all is OK with your ps3 before doing that :)
1:36:21 i cried from laughter when NSC said look you can see my face LOL NSC your a legend man :)
You always welcome bro. ✌️ 😅
Rest in Peace to my PHAT :'( such an informative video though man! WOW!
Thank you so much.
this was great video, thanks again
You always welcome :)
NSC Modz hope you got a good rest
@@futureshock7425 yes, thank you, hope you to :)
Thanks a lot for this informative video. forgive me for crappy vocab. I have a ps3 cecha00 firmware 4.86 rebug, the launch model. It has the 19-blade fan and i already clean and delid both cpu and gpu and give a new thermal paste (coolermaster mastergel pro maker)
And when i try to set the fan in webman(version 1.47.28) using syscon with room temperature 28.5°C, the cpu is maxed out at 74°C and the rsx is maxed out at 69°C while the syscon fan already kicking about 25% fan speed while on the xmb screen. Right now when i use my ps3 i always set the fan to a minimum 37% for the lowest and ps2 emulator, and auto kick the fan when temperature hits 67°C and my cpu is at 63 and my gpu is at 54. My question is, is my cpu and gpu dye is overheating or not? is my ps3 temperature normal with that circumstances? Should i lapped the ihs for the cpu and gpu? Should i also lapped the dye too(based on your ps4 pro dye lapped video)? And should i change my fan or just keep at 19 blade?
Thanks you for your video and i hope for an answer if possible. Stay awesome and keep creating informative video like this.
I have a PS3 Super Slim, and it turns off after about 2 hours, and the fan runs fast. I'm also experiencing a problem where certain textures won't load properly when playing a game. They will just remain blurry. What do you think is causing the texture issue? Do you think my PS3 is permanently damaged?
Your ps3 is overheating already all the time...
You need changing thermal paste
you need to change the heating plates for new ones before putting thermal paste on!
Hey NSC! I have a real hard time with this stuff and fixing. I have cechEO1 model and I am having YLOD. Is there any way I would be able to send it in to you for repair? If so what would the cost of something like that be?
Men, this is a great video thanks to take the time explaining stuff like this
You welcome, i just try my best ^^
Hey NSO!! What kind of oil do you recommend to use inside the cooler? Machinary oil is good (Singer)? White grease? Car engine oil? Thanks!!
Hey bro, you can use bearing grease or something like 10w40 But Fan sounds could get louder, it conforms in what condition the fan is...
Sehr gut gemacht, DANKE.
Great video again NSC. 👍
Do you have a website where you're selling PS3's. Thanks
Thank you very much ;) No man, no need to have a website, this here is my website xD
@@NSC-Modz
Thanks I'm way down in USA, Miami, FL. Guess the shipping would be very expensive if I were to purchase one of your special PS3's.
@@j.salinas2523 Not really, i think about 30 bucks :)
Hey.
What is your opinion. Is it ok to use a slim console with the top lid removed?
It runs cooler this way, but some on psx-place forum say that other components will overheat. Because it was designed to pull air in at the bottom on those vent holes. And you will disturb the cooling this way.
I'm curious what is your experience?
Thanks.
Not true, on the Slim you can let it open without problems 🤗✌️
I just got a Ps3 60gb model, I got one at launch but it got YLOD and died, now I can recover another one and take a good care of her
Nothing killed me more than when they need more money they gonna do the Playstation 5 Pro slim
😂
Richtig gute Informationen, sehr cool. Viele gute Hinweise...
Wenn das nur andere so schätzen würden wie du 😀 Bist immer Willkommen ✌️
Hi Great work. A PS3 Slim 2104B what are ideal idle and load temperatures on RSX and CPU? My temps are 65 on cpu and 68 on RSX fan ramps up to 55% when RSX hits 69 then temp goes down to 68. Idle temps are 45 to 55 on CPU and 41 on to 52 on RSX.
My PS3 has a simpler CPU and GPU temperature thing, but I don't think it was ever opened
most that was done in terms of dusting was doing the fan test/self clean thing, which can be done by holding eject
I've been having my PS3 super slim for 8 years since November 2013. And it got overheating what should I do?
Amazing nsc as always my friend keep it up 👍👍
Thank you much bro. :)
Honestly I love SYSCON because it's the OFW default and so silent. The PS3 is designed that way so it should be safe to use without any modification even when it's new. I just replaced the thermal paste on my Slim CECH-2004b and it's the same over 70 celsius when gaming, GTA V was up to 78, but mostly 75-76. I can't understand how everyone is getting about 60 celsius without having that very fast fan lol. I think that just the super slim is cool and quiet, slim and fat are not and it's OK, it's by design.
That's right, but not if the thermal paste is over under the IHS 😅
_"The PS3 is designed that way so it should be safe"_
YLoD: *Let me introduce myself*
What si the best temperature? 67 CPU & 64 rsx at 35% of fan speed its okay duro during the game ? I Have a ps3 fatt not retrocomptble
I bought a PS3 CECHE model recently. I completely cleaned it and replaced the thermal paste and pads but CPU still at 70°C on ideal! Do I have to De-lid it? I don't trust myself in doing the process. My RSX never goes above 50°C oddly enough.
Yeah, somewhen you will need to delid it or it will overheat.
Hi i have the same model it stays on green light no signal on tv trying to go to safe model not work trying to reset it didn't work any help ??
Thank you for video bro
You always welcome bro. ;)
🔥lit
😇✌
What is the normal temperature for fat model, my fat after cleaning have 70° in idle in game 80 ° use hen cooler is set on syscon.
So what should i do i can't understand English properly so i want you to write me i don't know how to apply thermal paste and other things i can't spend on it for now any other way? Please tell me
Hi! I live in DK - i got a CECHA00 and it would love to have a service like tgis by you. Is this something you do? Best Regards
i was in germany your english is 100% wp man
You welcome, thank you very much ^^
Hey NSC IN THE PLACE TO BE!!!! I need help. I was told my rsx should not run hotter than cpu it is running after delid cpu 60 rsx 61 fan 27%
60 degrees are excellent, my cechc04 with the fan at 36% can keep the cpu and the rsx at 65 degrees, obviously they never go up together, one always goes up while the other stays cool, often happens to the cpu, anyway I have to tell you one thing, sometimes I reach 66 degrees breaking through the barrier imposed by webman, natural consequence? The fan increases dramatically up to 46% and even more if it can't cool down the chips, it happens to me on Gran Turismo 5 as soon as I enter the race when I am among the other drivers😅
Hi, thank for all your useful videos.
Something I believe is very important when checking temperatures, is room temperature.
If room temperature is already high, then PS3 temperatures are goona be a little bit higher than usually.
For example I live in Japan and now is summer time, very hot in my room: 29-30C.
Can you tell us your room temperature please?
My room is also arround 30 degrees Celsius (living in tunisia) my ps3 fan is 40-43% to keep 68 degrees in game . How much is your fan spinning and your temperatures plz?
@@obscurelight
My fan is running like yours 40-42% to keep 65°C on delided fat.
@@Nico-mv5cv thanks. Im a bit skeptical about playing in these hot summer temperatures tho. Coz back in autumn and winter season, the fan didn't need to run that fast to keep 65° . It was in the 20s to 30s% and my room temperature was max 25 °
@@Nico-mv5cv are you japanese? I think 60 is good for fat at 40% my superslim go below 55 when morning, it is become 60-65 when mid day and the temprature of my place is around 33-35
Mine 75 °lol
cpu 75c rsx 70c and 70% how is that? what to replace the thermal paste

Replace the paste BUT also INSIDE the IHS, you gonna need to remove the IHS first, but take care!
good job !!! i saved 4 ps3 💪🏻
good explained like always bro keep it up😅👌
Thank you so much ^^
Is CPU 71°C RSX 68°C FAN 25% SYSCON. Is this okay NSC after I delid and clean.
Nice!..so, if I want to buy a used launch ps3 (I live in Sweden if that matters..) do I have to be worried about the console overheating after longer gaming session, playing disc versions Ps1 and Ps2? How easily will they overheat?
It conforms the thermal paste inside the IHS. Doesn't matter if you play PS1, PS2 or PS3 Games. When the thermal paste is bad inside the IHS, your PS3 will overheat even if you not play.
Thank you for fast respons..im looking for either a ps3 slim or a fat ps3, launch ps3, used. Its a nice feature to play both ps1 and ps2 but i recently found out about the overheating thing on launch model ps3..I do have a Ps2 slim so maybe just get a Ps3 Slim...
Should I open it up and see if it needs cleaning because I dont think most people even think dust and all that is a problem..thank you once more!
Yeah, dust blocked between the Heatsink will block the airflow.
Yo I was wondering. How did u get ur ps3 to show the info on the top right?
You need a Jailbreaked PS3
Here it is harder to sell after you removed the sticker. They won't belive you that you've just cleaned it and changed the thermal paste. And not messed with resoldering, reheating or butchering it in any way.
I also bought a few days ago a CECHC03 with the seal intact. It is dusty, but working. However the fan gets loud instantly when I start a PS3 game. I was afraid to use it any longer before I delid it. No CFW yet on it.
btw. how much do you ask for a finished PS3 like this? Thanks.
I'm not selling them, maybe my own ones, but than it conforms the work i had on it.
Who else is super cautious when they hear ps3 super high pitch and always touch after every 5 to 10 minutes
nice tut. you save my ps3
You welcome
I had this issue on my 2004B... Tried a delid, even made a tool and I ended up knocking off a couple caps next to the CPU (and scratched the substrate a bit BEFORE I made a tool for it, but it wasn't deep).
I just went the easy route and got a 4304. The RSX doesn't even have an IHS! (and it's TINY)
Why would the GPU not have an integrated heatsink
@@tylern6420 IHS = Integrated Heat*spreader*
Not heat*sink*. It has a heatsink with a heatpipe much like a laptop.
To answer your question - it's because the die is small enough not to need it, also having less layers to do heat transfer is usually better.
@@xan1242 I didn't know that they were heat spreaders
but isn't concentrated heat going to be easier to cool than heat that's been spread anyway?
@@tylern6420 Well, it is when you have a heatpipe. That's why you see many laptops and mobile devices without a heat spreader.
Gamers Nexus and Der8auer did a lot of videos on this subject.
The reason why you see heat spreaders is usually for other reasons, such as protecting the die from being damaged and being a cheaper solution to spreading heat to metal fins (e.g. aluminium heatsinks).
Nowadays you don't even see those on game consoles anymore because of more efficient heatsink designs (and usage of liquid metal on PS5).
I have one that definitely needs the heat spreaders removed.. the RSX in particular is running very hot.. once I got the jailbreak through it, the RSX was at 80c on syscon with with CPU running around 67!! Now as a jailbroken PS3 it runs on idle with the CPU at 51c and the RSX at 67c but the fan is running about 47% once it stabilizes . This is pretty terrible. I redid the thermal paste on top of the heat spreaders but it didn't help so this they must be removed but I don't feel too comfortable removing them. I wonder if I can just do the RSX since the CPU runs pretty cool and it is harder to remove that heat spreaders lol
Yes, you can also just remove the RSX of course, but take care, witch ever you remove work always with a lot patience.
@@NSC-Modz Thank you for your tutorials, they are very helpful! Great content, I have been subbed for quite some time! This delidding procedure was an amazing success! I used your method and the RSX was surprisingly easy to delid without doing anything crazy to risk damaging the chips. It was so dry under that metal plate! I redid the thermal paste on the 4 memory chips as well as the main glass looking chip(The heat spreader doesn't seem to stick well afterwards and I was using Arctic Silver MX4 thermal paste but got it to be just right before putting the heatsink back on).. the RSX was a little burned looking inside or had some kind of flux or something in there so I took a toothbrush with 91% alcohol and gently brushed it until the majority of that was removed, I then cleaned and applied the MX4 thermal paste. This CECHA01 PS3 runs amazing now.. both the RSX and the CPU run within 2 degrees Celsius max of each other while the console is on idle.. After a half-hour on a 29% fan, the console was running both the RSX and the CPU at 66 degrees... this is a HUGE difference from what it was doing before (the RSX was taking off in custom firmware getting the fan as high as 70% just to keep it at 68, it went to 95% when I first switched it from SYSCON to 68c max). Man this is awesome. I still need to test its temperatures in game but so far this has made the RSX run an astounding 14c cooler at a much lower fan.. at the fan speed it was at before the delid it was around 20c. Awesome awesome success and I wasn't feeling too confident that this would work. Thanks again NSC!
hi Nc my ps3 fat loud after 5min & fan blowing cold air not hot air whats the problem
What’s up bro. How you been?
Hi I'm fine hope you to ;)
Qual o nome da ferramenta que vc utilizou para cortar o silicone das tampas ihs do rsx e cell be? E qual era o óleo?
Chama se NSC's PS3 IHS Tool
I did fresh thermal paste and 19 blade fan and top of power supply remove it runs cooler on e01 ps3 and k01 2008 was lightly used from previous owner so fresh paste and cleaning is all it needed
My ps3 fat (CECHL01) got ylod 1 year ago. It was a nec/tokin. This week I took to repair and replace for tantalum capacitor. It's working perfectly. Running gta 5 with no problem and the cooler very silently. But I need to install this software to see how hot it is. I never change the internal thermal paste below the metal cover
So next thing you should do before overheat is delid the IHS
For now I think i'm safe. Probably the guy who I took my ps3 for replace the Nec/Tokin did this. I'm saying this because I have installed CFW and my temperatures running gta 5 it's about 66/68 C...
My super slim is 7 years old and it has YLOD but it runs The Last of us perfectly, though it sometimes drops to 20 fps.
Mine works fine and is 13 years old i got it back in 2008, it just needs to be cleaned 😅
Hey bro I have a ps3 80gb model it has a solid green light but no image do I need to reflow the gpu
Yes, you can give it a try, but only with flux.
Hibi where do u sel ps3 can u sel the fastest_SLIM(best grafic les lag) + noiseles + who almost never die ps3 slim who can handle cfw_DEX to me ? (if yep or no can u tell wich is this model i wish to own ?)
Where can I buy the spatula used to remove the CELL? Did you make it yourself?
You gonna be able to buy it soon from me, or you make it self 😀
@@NSC-Modz Thank you for your reply. I bought an inexpensive scraper for the time being. I will try it after cutting it into a similar shape.
How did you display the heat temps? How did you get them to display? What program and where to get it? I think it could be a useful tool to help diagnose a over heating Playstation 3 if you are not sure if it is over heating.
playstation free(edit)
@@Ali-ex9gw need a little bit more explanation than that
Your device must be modified in order for you to install the Webman program. After installing it, you search on CZcams for how to display temperatures in the Webman program.@@Soulcommander
Mine stays fan:27%-28% idle at 63c cell Rsx 55c , and in game the fan reaches 30% and cools off quick, I’m guessing I’m at good temps and numbers right? My settings are 64c max and fan 28% lowest and ps2 mode 34%
Btw I have another 60gb bc that has dead USB ports, can you fix that ? If so how much please it needs your whole service ! 🙌🏻
Im getting around 74C on the cell and 76C on the RSX while playing black ops 2 with 28% fan speed, guessing these are bad results?
What model is your console?
Yes
@@pr0ge cecha01
Have you replaced thermal paste? If so I'd set temp at max 68 at auto.
Try to put manual the fan control between 32-35%. If it goes down below 68-70C, i think its ok.
when u delid the ps3 what u use to hold the head spliters in place ???
I got Videos about that to, just take a look on my channel 😉
Wait you sell PlayStations? Damn I could’ve bought one from you instead of waiting to delid mine later on xD
Right xD
@@NSC-Modz I found someone on eBay that has 100% positive reviews and their a top rated seller that does delids and Nec tokin replacements. I might just send it to them for a CPU delid since I don’t have to risk breaking my PS3
qual a temperatura adequada p esses modelos? o meu cechc fica 65c rsx e cell em gow 3 com a fan 45%.
65°C is good... fan speed set on 32%... A few months ago I had a PS3 CECHC04, the temperatures were maximum at 66°C on the CPU and around 62°C on the RSX... the fan from 32% also reached 40% but in extreme cases it reached 42% or more... the record I reached was 59% and the CPU was still at 65°C😂
I love your videos.... I have a question and I have not found an answer, I have a PS3 slim that when I leave it in syscom mode the heat rises a lot, but when I leave it in fan 35 the temperature drops a lot, so much is the difference that the games no longer go from 60 degrees or 62, would you know what the problem is?
Problem is that the ps3 notice it gets over 74C° that's why the ps3 turns the fan like crazy. On about 35% fan speed, the temperatures stays under 74C°
Best regards
@@NSC-Modz That is my question, my PS3 in syscom raises the temperature very quickly within minutes of turning it on, but I have noticed that with the fan at 35, the temperature does not go above 60 degrees, it reaches 62 even while playing, do you have any idea what what could be the problem?
@@marcelosandoval-uo5uy i already try to explain you, on syscon mode the fan turns to slow, that's why your ps3 gets to hot. When it gets over 74C°, the ps3 will turn the fan very fast to get it under 74C° again.
Thank you so so much
You welcome
nice video. please I need to ask you what is the best model of ps3, slim or super slim and which the best version cech-xxxx ?
Thank you.
Thank you so much, go for the PS3 Slim CECH-210X
Thank you for your reply
@@AnasBlake no problem, as i got time i always reply :)
Nice work. maybe I'll buy one from your store once my fat ps3 dies on me.
Than it's to late 😆
Is it me or fat ps3 models looks like premium console ??
Fat launch models are the Cadillac of consoles. Truly a piece of art both inside and out.
Yes, for sure. It's true for all consoles that are first released, they go all in on the quality. Then after that they cut costs on building them and making them smaller.
@@cuttrogue yeah, you damn right, a Cadillac in Gold :)
@@TheLostAndNotFound Right, the rest is just all alt the Money...
@@cuttrogue The 60GB PS3 is the cream of the crop of PlayStation. Mine got the yellow light a couple of days ago, and I had it for 2 years. It has never been opened, so I am hoping that I can send it into a repair shop to get it fixed. I have a fan mod for it but I have not installed it yet. I didn't game much on it either, like 2 hours a day. But I didn't play on it everyday.
Hey my ps3 cpu shows 70-75°C while downloading a game on pkgi i reapplied the cpu and rsx thermal compound and cleaned the inside and outside of my ps3 all the way. My question is, is this bad or normal?
It begins to get bad...
Will fry quickly. My C04 chills at 65c. No delid. TP replaced on IHS not under
@@pomidortv797 will get higher some when, just like all ps3's
@@NSC-Modz well it got used as bd player 15yrs ago and when i got it out of storage room it had fw version 1.00
@@NSC-Modz the fan already sounds unhealthy and like a jet engine starting up at around 30%, but if you hear them at full speed, then it's like being in a wind tunnel
It has to be programmed to be overdriven in normal operation
I have the E01 model. It so far runs well but I always worry about the Yellow light of death. Do intercooler fans help prolong console life?
i have the same model ps3 and i worry about ylod too, but it can be cause by lots of different things that may still happen even if it's super cool all the time. so in my completely unproffessional internet opinion i say just do what he does here, play while it lasts, and send it in to someone good when it eventually stops working for some other reason years down the road. (cap failure, psu issue, etc) cause at the end of the day it's not gonna last forever no matter how hard any of us try anyways lol
tldr: don't worry, do what you can, enjoy it while it lasts, and while it won't last forever you can make it last longer. also, i don't think those intercooler fans do much.
@@saudade_firefly Good to know. Thanks for the tip. I’m trying to use my console minimally to help preserve it. I do notice with the intercooler fan on high the system doesn’t run as loud. So I think it helps it run cooler, but it also could be because of the noise of intercooler fan blocking the sound.
Welche Ps3 ist die beste eigentlich beim kühlen? Weil meine Ps3 super slim da kann ich Gta 5 mit 25% Lüftergeschwindigkeit zocken bei der RSX sinds 65 Grad und bei der CPU 63 Grad ungeköpft, hab MX-4 20 Gramm von Amazon bestellt und raufgetan
Meine PS3's sind die beste beim kühlen xD Ansonsten die CECH-250x oder 300x reihen, Jailbreak geht bei der 300x Versionen nicht wirklich...
The temperatures of my ps3 super slim playing gta 5 for 1 hour are 54 cpu and 52 rsx, the fan configuration always at 35%, although the first weeks of changing the thermal paste, the cpu and rsx did not exceed 49 lol
Nice :)
great video! i have problem with my ps3 fat model CECHA01, the problem is playing some games like TLOU, Uncharted 2 and uncharted 3, i play for minutes my ps3 is shutting down, my ps3 is installed custom firmware with webman mod, fan 45% having CPU 50c and GPU 40c, i change the thermal paste but the problem persists, only happen with these games, but GOW 3, Uncharted 1, MGS4, Killzone 2, Resistance 1 and 2 works perfectly, i don´t believe is a temperature problem, do you thing is problem with the capacitors NEC/TOKIN?
not nec tokins no idea how youd think that capacitors have anything to do with that
Hey i have the same problem like yours, my type is cechb00
All the " hehehe....heheh..heheheheee.." 🤣
And hehehehe again 😂😂😂
Bro after play strong game on my ps3 fat from external hardisk my console show temperature going up... Any fix for that...also you remove the gpu cpu conver how you put thermal paste bro??!?
Hi yeah, you will need to remove the IHS, i have a lot Videos where i Show how to do all.
@ 8:00 is bei mir normal auf 30% aber des bleibt so :D und beim zocken ändert sich des vielleicht um 3 grad
Sieht "noch" gut aus... :)
Das Thumbnail hat mich an dieses T-Junction Thema aktueller Grafikkarten von AMD erinnert... Die CPU läuft auf dem ersten Blick um die 75° C aber in Wirklichkeit ist es 10 oder 15° C wärmer durch T-Junction. (Überhitzung) Ob dieses Junction damals schon ein Thema war weiß ich nicht... Ich habe aber in meinem PC eine RX 5700 XT und da ist es halt so ein Problem mit der T-Junction. Bei den ersten AMD Ryzen CPUs war es auch so ein Thema. Da war ein Temperatur-Offset von über 10° C um CPU Kühler denken zu lassen die 10° zu viel zu kühlen damit die CPU kühler läuft. Keine Ahnung wie die es bei der PS3 gelöst haben, aber die läuft wie ein Gaming-Notebook am Temperatur-Limit. Dabei weiß jeder das Hitze Hardware töten kann. 🤔
Richtig, und eine PS3 läuft immer an Limit, es sei denn du legst selbst Hand an wie ich 🙈
@@NSC-Modz Bei meiner Grafikkarte habe ich tatsächlich selbst nochmal Hand angelegt... Hab eine msi RX 5700 XT Gaming X mit Flüssigmetal und konnte so 10° weniger bei der GPU rausholen und 20° weniger bei der T-Junction. Und bei meiner Slim habe ich keine Unannehmlichkeiten da läuft alles gut, die ist leise und kühler als jede PS3 die ich jemals hatte (Cech-2504A) nur aufgerüstet mit ner SSD. 🙂
@@shawn4403 Hehe sehr gut ;) flüssigmetall kommt für mich persöhnlich nicht mehr in Frage, nach ca. 6 Monaten wird die hart und nach 1-2 Jahren sehr hart... Und ja, sie 250x sind sehr kühl, aber auch da muss man irgendwann Köpfen ^^
Click: czcams.com/video/DHbK9xDucfI/video.html
@@NSC-Modz Echt? Zählt dies auch für vernickelte Oberflächen wie bei der GPU Baseplatte meiner Grafikkarte? 😐
Hi, I would like to know something: How do you check the CPU, RSX, etc on the top right corner like you do?
Hello First your ps3 needs to have a jailbreak, and than you need WebMan Mod
@@NSC-Modz Alright, thanks!
may i ask how do you get the temperatures on the home screen?
Sure, but this works only in jailbroken PS3's
@@NSC-Modz I have rebug. I dont know how to get this on home screen.
@@UmarAbid ok, Rebug, now install WebMan Mod, and than it will work when you press and hold SELECT & START :)
Servus. Bist du noch aktiv mit den Ganzen? Ich hab hier eine CECHJ04 und nach multiman ging's erstmal ab. Erster Gedanke : Flughafen. Wäre also mMn nötig einmal service zu machen. Was fällt da an? Ps3 wurde ewig nicht benutzt und vorher war das nicht so krass .
Hi, und Ja. Multiman hat einfach erkannt das die überhitzten will, deswegen reagiert es so. Vg.
@@NSC-Modz ja , das hab ich auch so aufgefasst. Machst du noch den Service ?
@@peaceofmind7579
👇
Für Freunde und Familie ja, meld dich einfach auf mein WhatsApp :)
@@NSC-Modz ich gucke Mal wo ich da was finde
Auf mein CZcams Kanal unter Kanalinfo 😀
I have a weird issue. I was having some audio skipping issues. So I hopped on utube and learned how to disassemble my ps3 to clean the eyes. While I was in there, I cleaned the fan and the fins of the radiator from all dust with canned air and alcohol on q-tips. I did so and it worked flawlessly. Now after a week or so of use, my ps3 is overheating and turning off on me. I've never had this problem before. Why is it doing this now after I cleaned it? I figured it was good preventative maintenance.
Hello, you did all right. But the thing is, when the ps3 was running hot before because all the dust and stuff, so there the thermal paste get damage faster. You now will need to apply new thermal paste, and better delid the IHS to, because inside the IHS is thermal paste. You can find a lot Videos on my channel about the PS3 IHS DELID.
damn, my first ps3 went to 78C at 44% fan 😂 i sold it 3 years ago for 90€ with 2 controller and 4 games, now I have the exact same model exept it stay at 65C on GTA 🗿
You could have fix it ^^
@@NSC-Modz I was too scared to take it apart, and I sold it for a very good price. I bough 3 ps3 (2 fat and 1 ultra slim) for 65 euros so i mean it was a good deal 🤣
@@dokkan_battle_ost_loops very good deal, i bet they was stolen 😂😂😂
@@NSC-Modz No, 1st one is the ultra slim (5 bucks, the hard drive was corrupted and the blu-ray drive bad), my fat model for 20 bucks (a friend was getting rid of his old consoles) and the last one 40 bucks completely refurbished in a game shop near my house (Console never go above 63C with fan at 33%) so it was worth it and i plan to give it to one of my friend for his birthday 😁
@@dokkan_battle_ost_loops all cool, i was just kidding 😀
Bro what if i charge that cpu 68% what happend plz tell me
What Temps do you get when your console is overclocked running The Last Of Us?
Good question, never overclocked my ps3 😆
@@NSC-Modz we need an NSC video with that info. N-S-C in da place to be!
I am scared to do this to my Ps3 fat 60GB PAL model because I am a complete newbie I have applied The Artic-MX4 thermal paste above the IHS Plates but should I give it a try? I wanted to ask what tool should I use to heat up the CPU And RSX To apply the new thermal paste under them?
Be really careful, better watch my latest videos on how about removing the IHS and better practice first on some broken ps3's before you do that on a working ps3...
eBay is no more in my country so I can only find one 60GB PS3 on my local craigslist. I hope one unit will be enough for practicing. Anyway I want to know what tool do you use to heat up the IHS Chips?
My ps3 fan is 35% and the temperature is cpu: 65 and rsx is 57 celcius is it ok? It’s on the home screen (ps3 fat)
It's not bad, watch the CPU with the time...
@@NSC-Modz yea I always checked the temperature while playing games
@@NSC-Modz I want to replace the thermal paste under the cpu and gpu but I’m scared to do it lol
It's not bad but not perfect, my PS3 fat after 30min in xmb fan 35% cpu is 51 (i have the eraser mod) rsx: 53. After 1 hour playing rdr1 cpu: 58 and rsx: 60. Both cpu and rsx are not delided but in future I'm planning to delid the rsx.
@@jelkobg5944 I just buyed a cecha00 fat ps3 and the temperature is cpu: 58 and rsx: 48 33% fan speed on the home screen, the seller delided it, yours is still cooler maybe because it’s snowing on your country?
Pfff, I replaced the thermal paste on my phat model ages ago, I use manual 45% fan speed, yeab it sounds like a jet engine but mine sits around 60degres C.
I have a problem of disappearance of the road and buildings in the gta v ps3, what is the solution, brother
Good question, better ask sind GTA 5 Modders...
Everyone has it since 2020 quarantine servers being lags
@@NSC-Modz OK bro
The PS3 is working super hard to render them and can't do it very well due possible poor cooling, maybe. All that heat gonna kill your ps3.
@@TheRandomname951 that's why i do cool it that way :)