Watching this I’m thinking the song by moby is a little too cheesy. But you know I had to YT the intro to Gone in 60. In my opinion the greatest intro to a movie. It just gets your adrenaline going
Normally its about 5-10 minutes between coats and it fully cures in 24 hours...at least thats my experience with the Gravity 2K clear, which I've been really happy with.
I have some doubts. Do I need to purchase the three products presented or can I just apply the Multi-se Gloss to apply the varnish? I will follow these videos to assemble my Shelby GT500 and acquire the paints presented. Are there any restrictions on shipping to Brazil?
I have a model that is already completed with chrome trim and glass in can I clean it good tape up the tires and shoot this clear on it. Will it go over the plastic glass and chrome trim okay or have you never tried this. I used it for the first time yesterday and I am sold on it ordered more today. Any feedback would be great.
I really want to purchase the 2k clear, but I'm very concerned about spraying it. I will be using an extractor and filtered mask but I live in a small apartment and will be spraying in the same room as we live/cook in. Should I just stick to the 1k? It seems alot safer to use in my circumstances? I would really appreciate any advice. Thanks, Gar.
If you have a strong enough exhaust fan and you are able to exhaust the 2k Clear vapor through your window then you should be fine. I would not recommend spraying 2K clear without wearing any mask or respirator. A spray booth with an exhaust fan is also a must when you spray 2K indoors.
Look for the Presto 06300 Dehydro Electric Food Dehydrator online. www.amazon.com/Presto-06300-Dehydro-Electric-Dehydrator/dp/B008H2OELY/ref=lp_1090752_1_1?s=kitchen&ie=UTF8&qid=1470941311&sr=1-1
Hi Dave, I was wondering should you stir the ingredients into the clearcoat or shake it like we do with the paint. I don't think I should shake, due to air bubbles.
Hi I was curious if U 👉Have U ever come across a DECAL SET that had a WARNING ⚠️ that specifically states NOT TO USE DECAL SOLUTIONS..B4??? I just found a set from an older Revell kit??? Thanks 🙏 ZENMODELING
Me again. Just got the 2k clear but now its 4:1:1 If I use 6ml of clear how much of the other two should I use. Do you recommend more than 6ml for a Miata?
Hi, yes the new updated 2k clear has 4:1:1 mixing ratio. For 8 ml clear the mix would be like 2 ml hardener/activator and 2 ml thinner. That is the mixing ratio we use for our single use 2K clear product which covers one 1/24 or 1/25 scale model kit car body. I think you could do that 8ml:2ml:2ml mix for the miata body, it will be plenty for that car.
make sure your first 2k clear layer is a thin mist coat, let it dry for 5 minutes and then you can do 2 wet coat and you are all set. You can wet sand in 24 hours if needed (if you get orange peel or trash in the finish) and re polish it back to full shine.
@@Ken-sl4um You are very welcome! Psychiatry is also very important these days! :) If you don't feel like playing around with the mixing ratios with the 2K clear we can always send you the single use option that is pre-mixed and you don't have to worry about the ratios. You just mix the pre-measured activator with the clear and you are ready to spray it. But it only covers one car body (single use) versus the set you received will cover at least 2-3 1/24 scale model car bodies.
I'm back. Just clear coated another model. 8 2 2 mix, .5 needle around 25psi. Tack coat then heavier. No matter what I did I ended up with tons of orange peel. Not sure why it wouldn't level out. Now I have to do more sanding and polishing than I should have to. Any suggestions?
10-15 minutes. Sanding the color coat is not really recommended especially if it is a metallic base color coat. But you can wet sand the final coats of your 2K clear and polish it back to full high gloss shine.
IF YOU NEVER SEEN HIS WORK THAT IS , CHECK IT OUT HERE ON CZcams ITS "THE SCALE MODELING CHANNEL" MAYBE HE CAN HELP YOU WITH A FEW POINTERS ON WHAT EVA CURLS UR SOCKS LOLOL 👍🏻👍🏻👍🏻🇺🇸🇺🇸🇺🇸😎
R.I.P. Dave, awesome tutorial videos. An amazing builder, what a loss..
Thank you Josh. It's a huge tragedy. He will be missed and never forgotten. Rest in Peace!
I appreciate the way you explain exactly how to do what you're doing. The videos are informative for modelers.
Thank you for the positive feedback!
Looking awesome! Very iconic car that I never get tired of looking at!
Wowsers, great work Dave.
Fantastic clearcoat!
looking good david great shine
very nice clear looking great
Watching this I’m thinking the song by moby is a little too cheesy. But you know I had to YT the intro to Gone in 60. In my opinion the greatest intro to a movie. It just gets your adrenaline going
Hi Dave, what is your drying time between coats?
Normally its about 5-10 minutes between coats and it fully cures in 24 hours...at least thats my experience with the Gravity 2K clear, which I've been really happy with.
What camera are you using to record with? Beautiful work.
Try adjusting you camera so we can get a better view of the paint job... Thank you
I have some doubts.
Do I need to purchase the three products presented or can I just apply the Multi-se Gloss to apply the varnish?
I will follow these videos to assemble my Shelby GT500 and acquire the paints presented.
Are there any restrictions on shipping to Brazil?
you're really blasting that stuff! can you explain? i would expect it to be dripping all over the place.
I have a model that is already completed with chrome trim and glass in can I clean it good tape up the tires and shoot this clear on it. Will it go over the plastic glass and chrome trim okay or have you never tried this. I used it for the first time yesterday and I am sold on it ordered more today. Any feedback would be great.
I really want to purchase the 2k clear, but I'm very concerned about spraying it. I will be using an extractor and filtered mask but I live in a small apartment and will be spraying in the same room as we live/cook in. Should I just stick to the 1k? It seems alot safer to use in my circumstances? I would really appreciate any advice.
Thanks,
Gar.
If you have a strong enough exhaust fan and you are able to exhaust the 2k Clear vapor through your window then you should be fine. I would not recommend spraying 2K clear without wearing any mask or respirator. A spray booth with an exhaust fan is also a must when you spray 2K indoors.
Thank you very much for the quick reply! I will place an order soon. Keep up the good work!!
You are very welcome! Looking forward to your order!
what type of dehydrator do you have. i would like to purchase one but not sure on which one to get. Great build buy the way
Look for the Presto 06300 Dehydro Electric Food Dehydrator online.
www.amazon.com/Presto-06300-Dehydro-Electric-Dehydrator/dp/B008H2OELY/ref=lp_1090752_1_1?s=kitchen&ie=UTF8&qid=1470941311&sr=1-1
Another great one for scale model cars that I have is a “Parallexx” (as listed on eBay) perfect size ...
Where can I get a kit like this? Excellent video
Hi Dave, I was wondering should you stir the ingredients into the clearcoat or shake it like we do with the paint. I don't think I should shake, due to air bubbles.
How does the exhaust system of your paint station work?
I'm from Brazil, it's difficult to get these things here. Thank youGreat job.
Hi I was curious if U 👉Have U ever come across a DECAL SET that had a WARNING ⚠️ that specifically states NOT TO USE DECAL SOLUTIONS..B4??? I just found a set from an older Revell kit???
Thanks 🙏 ZENMODELING
About déshydrater, how many time, and what température ?
What size needle are you using in that brush I use a .3 will it be ok.
Yes, .3 is fine.
what psi are you using thru the air brush
Me again. Just got the 2k clear but now its 4:1:1 If I use 6ml of clear how much of the other two should I use. Do you recommend more than 6ml for a Miata?
Hi, yes the new updated 2k clear has 4:1:1 mixing ratio. For 8 ml clear the mix would be like 2 ml hardener/activator and 2 ml thinner. That is the mixing ratio we use for our single use 2K clear product which covers one 1/24 or 1/25 scale model kit car body. I think you could do that 8ml:2ml:2ml mix for the miata body, it will be plenty for that car.
make sure your first 2k clear layer is a thin mist coat, let it dry for 5 minutes and then you can do 2 wet coat and you are all set. You can wet sand in 24 hours if needed (if you get orange peel or trash in the finish) and re polish it back to full shine.
Thanks. This is why I went into Psychiatry as I could never figure out ratios
@@Ken-sl4um You are very welcome! Psychiatry is also very important these days! :) If you don't feel like playing around with the mixing ratios with the 2K clear we can always send you the single use option that is pre-mixed and you don't have to worry about the ratios. You just mix the pre-measured activator with the clear and you are ready to spray it. But it only covers one car body (single use) versus the set you received will cover at least 2-3 1/24 scale model car bodies.
I'm back. Just clear coated another model. 8 2 2 mix, .5 needle around 25psi. Tack coat then heavier. No matter what I did I ended up with tons of orange peel. Not sure why it wouldn't level out. Now I have to do more sanding and polishing than I should have to. Any suggestions?
I love the videos but if you made more videos and more consistent I think you would have more subs
How long between coats of clear? Do you sand the color coat?
10-15 minutes. Sanding the color coat is not really recommended especially if it is a metallic base color coat. But you can wet sand the final coats of your 2K clear and polish it back to full high gloss shine.
Thanks
@@Ken-sl4um You are very welcome!
DA CAR IS HOT BROTHER AS IS STRIPES LOOK DAAAM GOOD AS GOOD AS UR JOB WELL DONE ON DA CAR 👍🏻👍🏻👍🏻✌🏻️✌🏻✌🏻👊🏻👊🏻👊🏻💯💯💯🏆🏆🏆⭐️⭐️⭐️⭐️⭐️🌟🌟🌟🌟🌟
IF YOU NEVER SEEN HIS WORK THAT IS , CHECK IT OUT HERE ON CZcams ITS "THE SCALE MODELING CHANNEL" MAYBE HE CAN HELP YOU WITH A FEW POINTERS ON WHAT EVA CURLS UR SOCKS LOLOL 👍🏻👍🏻👍🏻🇺🇸🇺🇸🇺🇸😎