JUICY DRIPPING LEMONS| Shrink Plastic & Resin

Sdílet
Vložit
  • čas přidán 30. 01. 2022
  • #Shrinkplastic #jdiction #プラ板
    Hey Everyone! Welcome back and happy 2022!. Let's make some juicy lemons with shrink plastic and resin! Super easy and beginner friendly project! Make all kinds of citrus accessories by varying the colors! I hope you try it out!
    Helpful video: Shrink plastic 101: • Shrink Plastic for Beg...
    Affiliate links are marked with ✦. If you use my affiliate links, I get a small commission to help support my channel at no cost to you.
    ✦JDiction UV resin: jdiction.online/?ref=jxwv01ujb4
    10%off coupon code: AMYMADE
    ✦Shrink plastic amzn.to/3Hj3abs (I sand it myself using 320 grit paper)
    ✦Posa: amzn.to/3od622p
    ✦Alcohol marker: samzn.to/3GfrppR
    ✦Soft pastels: amzn.to/3HhNHbQ
    Buy me a cup of "resin" to help me support this channel: ko-fi.com/amymade
    Instagram: @emii.alchemii
    Tiktok: @amymadee
    Amy.madeYT@gmail.com
    My Shop: www.emiialchemii.com
    IMPORTANT NOTICE: Please ALWAYS use resin with proper precautions including wearing proper PPEs (glove, mask, respirator etc) AND working in a well ventilated space. I recommend getting a hold of the SDS (Safety Data Sheet) info that every resin company has available to the public (by law). This has all the info about the resin you are using including the precautions you need to take and first aid care. Watch my resin safety video for more info: • RESIN SAFETY | Importa...
    Music: Epidemic Sound
    www.epidemicsound.com
  • Jak na to + styl

Komentáře • 65

  • @readintoit917
    @readintoit917 Před 2 lety +16

    Once again you do things in such a unique way! I watch your videos and think, "Yep, she Amy-ed that Thang!" You are now an action word in my mind.

  • @ahngele28
    @ahngele28 Před 4 měsíci

    I love how meticulous and careful you are when you're creating. That's why everything turns out perfectly!!!

  • @cherrycordiaI
    @cherrycordiaI Před 2 lety +2

    Too cute. I have lots of shrink film lying around and I bet my sister would like a pair of these to remind her of the approaching spring.

  • @potathoe1170
    @potathoe1170 Před 2 lety

    These are so cute! Yum!

  • @josie8896
    @josie8896 Před 2 lety +3

    Great video! Love the drip idea, they're so realistic!

  • @Frouza21
    @Frouza21 Před 2 lety

    this is an amazing work!

  • @iekika79
    @iekika79 Před 2 lety +3

    Aww I love these!! I love anything lemon!! They turned out sooo cute!! ❤️🍋

  • @melissazimmerman4208
    @melissazimmerman4208 Před 2 lety +1

    This one is my favorite of yours so far 😍

  • @lindatoews5265
    @lindatoews5265 Před 2 lety

    Just so impressed by you and your willingness to share, your awesome

  • @dowarnette
    @dowarnette Před 2 lety

    Really cute with the drip.

  • @QueenAltaria
    @QueenAltaria Před 2 lety

    The lime colored marker you added to show the lemon juice packs inside is... *chefs kiss*

  • @mirinconcitofelizclaudiaco9146

    Wow beautiful

  • @chitowntexan
    @chitowntexan Před rokem

    So realistic & pretty 😍

  • @diabanyncarrasquilloescale741

    This is so beautiful!! You are truly inspiring!💜

  • @MileyonDisney
    @MileyonDisney Před 2 lety +1

    Awesome! They look so DELICIOUS!

  • @rashemechester9035
    @rashemechester9035 Před 2 lety

    Super cool 👍🏾

  • @Kyttii
    @Kyttii Před 2 lety

    This was so cooool

  • @giovannaluisalima4397
    @giovannaluisalima4397 Před 2 lety

    So cute

  • @lazycat26
    @lazycat26 Před 2 lety +1

    Wow awesome. really like it.. 🍋💛✨

  • @Pom88pom
    @Pom88pom Před 2 lety

    Amazing

  • @demiwithers
    @demiwithers Před 2 lety

    So satisfying and lovely to watch,, i love your craft videos they taught me how to use resin :]

  • @mbg7966
    @mbg7966 Před rokem

    Ssooooooo cute❤️❤️

  • @elzamiller
    @elzamiller Před 2 lety

    Thanks Amy I really enjoyed.
    Sonny in Kentucky

  • @iwantmy_sk844
    @iwantmy_sk844 Před 6 měsíci

    Wow!...the juice!💦 (👏😊) . . .Amazingly simple, but AMAZING nonetheless! You go, girl!

  • @JPSkyeBlue
    @JPSkyeBlue Před 2 lety

    Super cute! Does the UV resin yellow over time?

  • @kellyjean4981
    @kellyjean4981 Před 2 lety +2

    I love how you used a variety of colouring mediums. Do you like the us resin you used? I have the same brand but haven’t used it yet. The last brand I used had a very strong odor.
    I always love to watch your videos!

    • @AmyMade
      @AmyMade  Před 2 lety +3

      Thank you! So far, I like the resin. Low viscosity and low odor resin compared to other brands

  • @lalameans4376
    @lalameans4376 Před 6 měsíci

    Hi 👋 love ur work...do u put resin in both side? 🤔 tks 😇

  • @siddharthlal4183
    @siddharthlal4183 Před 2 lety +1

    It looks so cute and beautiful! I love it and I'm going to try this!! What is that thing you used in the cure part?

    • @AmyMade
      @AmyMade  Před 2 lety +2

      Thank you! I used uv resin

  • @jiajia6872
    @jiajia6872 Před 2 lety +1

    Hi Amy,I am your fans and love to watch your video, I saw your shrink plastic videos and find you used different sealer in different work.
    wondering ‘how do I choice the sealer ?’ 🤔
    (recommended brands, function etc.)
    Really want to know, thank you for ur help!

    • @AmyMade
      @AmyMade  Před 2 lety +2

      Any sealer that works with plastic should be good!

  • @carolstewart1704
    @carolstewart1704 Před 2 lety +2

    Hi Miss Amy!! I love all of your videos and rly appreciate that u out so much time and work into helping us by making and posting them🥰 I was wondering if u could help me 😅 I made some shrink pieces recently for bits for a shaker.. um first I wanted to ask bc I have the sanded side kind also.. do u recommend using the outline/marker on slick side then flip for coloring in... The. What side do u bake upwards? 🤔 And then.. I'm hoping it was just cruddy weather but I spray sealed both sides before allowing to dry and then added uv resin but they still started to pull off 😭 I'll probably try with mod podge nxt round but was rly hoping the spray would work for me 😓 I used... "Rust-Oleum universal advanced formula clear durable topcoat high gloss" holy cow what a long name 😅 tysm whether u can help with this or not!! 🥰😘

    • @AmyMade
      @AmyMade  Před 2 lety +5

      Hi! If you’re using permanent marker, it’s better to do it on the shiny side so the ink won’t bleed through the fine scratches. If you’re using paint marker as an outline, you can do it on the sanded side. However it really depends on the look you’re going for. Outlining and coloring on the different sides will give the piece a 3d effect. Regarding your sealer, Make sure it has dried completely and make sure the resin has cured completely. Also, with the sealer, light coats is always better than a couple thick coats

    • @carolstewart1704
      @carolstewart1704 Před 2 lety +2

      Ur awesome!! TYSM! I just got my first set of POSCA pens! I rly like the both sides coloring look and I'm thinking I must've sprayed too much or the weather inhibited it's drying more than I thought! 😅 So wonderful of u to help me!! 💗💕

  • @BexEtcArt
    @BexEtcArt Před rokem +1

    ❤❤❤ I used to use shrink plastic years ago but I used lucky squirrel brand but it’s gone bust. Can you recommend one that doesn’t warp the image when shrunk? Ty xx

    • @AmyMade
      @AmyMade  Před rokem +1

      I use Grafix shrink pladtic

  • @Mikabellaa
    @Mikabellaa Před 2 lety

    What did you use to add the shimmer?

  • @johnendordevilla5155
    @johnendordevilla5155 Před 2 lety

    hello, your videos are really helpful, i just have a question tho w/ regards to the sealer used before applying the resin.
    is glossy clear good? or just the flat/matte one? thank you

    • @AmyMade
      @AmyMade  Před 2 lety

      Thank you. It really doesn’t matter which finish to use 😆

    • @johnendordevilla5155
      @johnendordevilla5155 Před 2 lety +1

      @@AmyMade i see so as long as i apply clear spray , putting resin will definitely stick right? thank you so much

    • @AmyMade
      @AmyMade  Před 2 lety

      It would stick better.

    • @johnendordevilla5155
      @johnendordevilla5155 Před 2 lety

      thank you very much! :)

  • @Odolwa2
    @Odolwa2 Před 2 měsíci

    do you find that resin tends not to bubble in the way that mod podge DM bubbles? with DM, it appears smooth and clean going on (literally no visible bubbles), but when it dries, there's tiny little dimples here and there which are apparent as tiny tiny bubbles on the surface. also with DM, it never ever EVER covers the edges of my shrinks, it always has this unfinished edge.

  • @gingergurko594
    @gingergurko594 Před 2 lety

    What UV lamp and flashlights do you use?

    • @AmyMade
      @AmyMade  Před 2 lety

      I use a 6w nail lamp and a uv torch

  • @andreaciaternasrobles
    @andreaciaternasrobles Před 6 měsíci

    Hola cuanto mide al inicio ?porfavor 🤗

  • @emopulluza3602
    @emopulluza3602 Před 2 lety

    Quick question: what kind of varnishing spray did you use?

    • @AmyMade
      @AmyMade  Před 2 lety +2

      I use ones that claim to bond to plastic.

    • @emopulluza3602
      @emopulluza3602 Před 2 lety +1

      @@AmyMade Thank you so much! 🙏

  • @thefun1711
    @thefun1711 Před 9 měsíci

    Will mod podge acrylic sealer work?

    • @AmyMade
      @AmyMade  Před 9 měsíci

      Never tried that one. Always good idea to test it yourself on a small sample before using it on your project

  • @user-eb5uz5qx3g
    @user-eb5uz5qx3g Před 2 lety

    @AmyMade what size would you say your lemon print out is?

    • @AmyMade
      @AmyMade  Před 2 lety

      I didn’t print them. I drew them. I believe they were about 1.5 inch

    • @user-eb5uz5qx3g
      @user-eb5uz5qx3g Před 2 lety +1

      @@AmyMade I was referencing the black and white lemon print, that you put the frosted shrink plastic over top of before drawing with color. I tried ( am still getting used to ) the grafix white for inkjet, it's pretty interesting. I have some random brand of frosted and like you say it's not very nice bc of how they sand at the factory. It also doesn't go through the cameo very well at all. Would you say grafix brand is a good choice for cutting machines?

    • @AmyMade
      @AmyMade  Před 2 lety +1

      Oh ok. Yea the image was 1.5 inch. To cut with a machine, you’ll have better result with a new blade. The problem with random brand is that the thickness of the plastic may vary. I just got one and it was thicker than what Im used to and my machine didn’t cut it as well. Grafix is alright although the last batch I purchased weren’t as clear.

  • @rebekahrhodes9512
    @rebekahrhodes9512 Před 2 lety

    Do you need the light to help cure them or can they air dry?

    • @AmyMade
      @AmyMade  Před 2 lety

      This one is uv resin so you need the curing light

    • @rebekahrhodes9512
      @rebekahrhodes9512 Před 2 lety +1

      @@AmyMade have you tried resin that doesn't use UV? Are they not as good for the shrink plastic?

  • @qtgrlhl
    @qtgrlhl Před 2 lety

    Hello! Could you share the title/artist of the song in this video?

  • @gingergurko594
    @gingergurko594 Před 2 lety

    What sealer do you use?

    • @AmyMade
      @AmyMade  Před 2 lety

      I used an acrylic sealer spray. Brand: Tamiya

  • @lindatoews5265
    @lindatoews5265 Před 2 lety

    Just so impressed by you and your willingness to share, your awesome

    • @AmyMade
      @AmyMade  Před 2 lety

      Thank you so much?🥰