After building lowrider models as a kid to teen and following your work for inspiration I was so happy to see redcat come out with this car. My first mod is gonna be the scale suspension kit made by super scale. So I knew I had to get this car when redcat released it. Bummed I couldn't get your edition but I like red,lol. Now to figure out if I can mod it to use a dual servo setup for the front so I can have independent movement like the rear. Keep up the great work man. You're a true inspiration 😎👍
Hey Jev nice to see u still running the game on them models and 1/12 scale i still have the original wires u made me for my 67 RS impala going to order a new one from you
This also takes care of sticking hoping switches on my 6 4 the upper left hand switch that was meant for hopping was starting to stick aloght and not SPRING back so I did this swap and now I use the upper right hand switch and it fixed the problem perfectly instead of replacing an entire switch it worked perfectly
Really cool bro but why don’t you make them like this out of the box seems like so much money & customization has to be put In them to make them hop better and … dual servos lipo batteries shocks toe correction on and on … there already so expensive….Im really just curious
When do you think prices will go down a little? I’m on a very tight budget and I really want one of the Lowriders. It sucks how just because some numbers I can’t buy it because I don’t have that much. Even if I do my parents won’t get it 😭😭
TikTok had an ad’ buy one of these for $89.95 and i fell for it … took 2mths to ship and they sent me an off-road buggy that was worth $20! reputable dealers are hard to come by with so many scammers on social platforms
@jevrie ....have you checked out supercale2020 channel on youtube , they made a firmware for this 64 that gives it that little bounce effect when working the hydros ... nice upgrade
@@frankiesrcs8116 I would def drop some of the weight plates as a starting point and build your way up untill your satisfied. There are other factors that influence the hopping for instance I performed the drive shaft mod so that the wheels can turn freely like having a car set to neutral. Lifting the front slightly so you make actual use of the shocks, lowering the rear slightly, etc.
After building lowrider models as a kid to teen and following your work for inspiration I was so happy to see redcat come out with this car. My first mod is gonna be the scale suspension kit made by super scale. So I knew I had to get this car when redcat released it. Bummed I couldn't get your edition but I like red,lol. Now to figure out if I can mod it to use a dual servo setup for the front so I can have independent movement like the rear. Keep up the great work man. You're a true inspiration 😎👍
👊🏼😎👍🏼
Can you do a video on how you mounted the two front servos? Fascinating! Thanks Jevries!
Hey Jev nice to see u still running the game on them models and 1/12 scale i still have the original wires u made me for my 67 RS impala going to order a new one from you
Thanks brother!!👍🏼😎👍🏼
Yes sir brother appreciate everything
Excellent! Thank You Jevries!
Blessed to live in Phoenix Az where I can get parts by my house
This also takes care of sticking hoping switches on my 6 4 the upper left hand switch that was meant for hopping was starting to stick aloght and not SPRING back so I did this swap and now I use the upper right hand switch and it fixed the problem perfectly instead of replacing an entire switch it worked perfectly
You are a got d@!n genius! Thank you 🙏🏽 for this tip. I tip my hat 🎩 to you sir.
Very good work 👏😊👍
Agree
That’s dope!!
agree !
Really cool bro but why don’t you make them like this out of the box seems like so much money & customization has to be put
In them to make them hop better and … dual servos lipo batteries shocks toe correction on and on … there already so expensive….Im really just curious
Nice job. Which system to make it jump? Servo ?
Hi, Yes I used two Reef's 300 servo's on the front to make it hop.😎
@@jevries ok thanks. Succesful !!!
@@yoyodu6921 Excellent!
Do we have to change any endpoints when switching the channels ?
After mounting any new servo's always make sure they are set to neutral first!! than attach the horn or rods and set endpoints so they won't heat up.
Hope they become more affordable.
How much would it cost for a custom rc lowrider
My Redcat 64 got unbinded and now it will not remind how do I fix this
When do you think prices will go down a little? I’m on a very tight budget and I really want one of the Lowriders. It sucks how just because some numbers I can’t buy it because I don’t have that much. Even if I do my parents won’t get it 😭😭
I'm sorry bro but I don't see a price drop anytime soon.
U guys needa drop it too 500 atleast
Prob gonna go up more
@@Texasrattlesnake210 I'm sorry but I don't have any say in it.
TikTok had an ad’ buy one of these for $89.95 and i fell for it … took 2mths to ship and they sent me an off-road buggy that was worth $20! reputable dealers are hard to come by with so many scammers on social platforms
@jevrie ....have you checked out supercale2020 channel on youtube , they made a firmware for this 64 that gives it that little bounce effect when working the hydros ... nice upgrade
where did you get those gold rims from? or did you paint them yourself?
The rims I made years ago. I'm working on new TRUE 13s to be relesead early June.
@@jevries oh nice, will they be gold or just chrome?
@@christianruiz554 Both Gold and Chrome.
@@jevries is there a way to pre order them or just get them while they’re available
How much does it cost?
$599.99 www.jevries.com/shop
Hoping good !!!...(RCS YOUR PRICE)
What reefs servos can i use in the rear? Are the 300s all the same?
How many weights to you have in the back so it wont get stuck?
I use 4 plates and 3S lipo battery. Lowering the rear also helps to make it hop properly.
@@jevries and if it's all stock with stock battery how many plates should I use
@@frankiesrcs8116 I would def drop some of the weight plates as a starting point and build your way up untill your satisfied. There are other factors that influence the hopping for instance I performed the drive shaft mod so that the wheels can turn freely like having a car set to neutral. Lifting the front slightly so you make actual use of the shocks, lowering the rear slightly, etc.
Hello Jev i sent you a message on FB if you get a chance need to get ahold of some parts thanks again bro
Are these 20 bucks
$599.99 anyhting lower than that is a scam.
Do you do customs?
Anyword on wheels bro
Jev its me chato83 from layitlow i need 2 sets of wheels bro please with 520s i sent u a message on fb please when u can get in contact with me