2024 YAMAHA WR450F - GYTR Hydraulic Clutch kit instaling
Vložit
- čas přidán 1. 02. 2024
- 2024 YAMAHA WR450F - The GYTR Hydraulic Clutch Kit is specially tuned to optimize disengagement zone, decrease lever load and minimize maintenance. Self-adjusts to clutch heat and wear in all conditions to eliminate the need for manual clutch lever adjustment.
OEM part number: BHR-F63A0-V0-00 @RSWR450F
Full story: www.rajce.idnes.cz/rswr/album... - Auta a dopravní prostředky
Dude, I'm tired of waiting for new riding videos of your cool Yamaha wr 450 2024 from you, please release your riding videos
Since I got really old I finally went Rekluse auto clutch on my last 3 off-road motorcycles. Awesome in the really technical riding sections like rock gardens.
Yes, Rekluse clutch is very good option 👍
Pekne 👍👍👍, už aby začala sezóna
nice 👌🏼
Ahoj. Som nahodil aj ja tu hydrauliku ale strasne je to makke a nemam pocit ze to chyta, a dost tazko sa aj odvzdusnovala, tebe to slo v pohode?
Odvzdušnit to jde velmi dobře, ale musí se sundat víko pumpy, dole na válečku povolit odvzdušňovací šroub, na něj dát hadičku a stříkačkou tlačit brzdovou kapalinu (BREMBO RACING LCF 600+) nahoru do otevřené nádobky. Páčka je tuhá a nastaví se dle potřeby šroubkem, já mám spojku nastavenou aby zabírala hned na začátku a ovládám jedním prstem.
friction point looks to far back. Can it be adjusted?
yes fully adjustable (i have long fingers, that´s why I have such a friction point)
Nice upgrade ! Is the engagement smoother than with the cable?
works very easily and smoothly 🔝
@@RSWR450F great! Enjoy your ride🤟
In my WR450 2024 I installed one thinner clutch disc and lengthened the lever in engine. Runs as smooth as butter.
@@witos1753 in my 2003 250 yz, i installed some spacers over the clutch stud, it decrease the springs pressure and it helps
@@Pajero.m57 i new Yz and WR the clutch have plate spring do you cant do this anymore 😉
Hey bro can you do a video on how to uncork the 2024 wr450. how to get to the throttle stopper screw
Instruction: img41.rajce.idnes.cz/d4102/18/18839/18839300_9cc3c42b7acbd95c8825400ad66cd7d4/images/DSC05755_2.jpg
@@RSWR450F I see the bolt I need to take out but I can’t get to it the frame is in the way like I can’t grab the bolt with the torx bit is there any other way to get to it without pulling parts off the bike and I have the 2024 wr450f
Same system remove throttle stop screw (time 3.54min): czcams.com/video/-yYPfOJzx9w/video.htmlsi=7hstGkmJ7RrzNjdy
@@RSWR450Fthank you,👍
@@Riskyyz make sure you got the special torx bit with the hole in it, it's a security torx. You can get it or with long bit driver extensions between the frame and the wiring, barely but you can get it that way. You can cut off part of the screw to get more throttle or you'll get a new one with the gytr tuner kit if you go that route
much more oil capacity over the old one?
2023 800ml - 2024 1200ml