How to Epoxy Floors like a Pro | Beginner's DIY Guide
Vložit
- čas přidán 3. 08. 2024
- Want to update your home or commercial floors on a budget? Check out all of our epoxy floor products! bit.ly/4awDpDg
Epoxy Flooring for your Concrete and Wood Floors:
www.stonecoatcountertops.com/...
Metallic Epoxy Floor Step by Step Written Instructions:
www.stonecoatcountertops.com/...
Stone Coat Countertop Epoxy:
www.stonecoatcountertops.com/...
Products used ⬇️
Epoxy Metallic Flooring System
Floor Patch Epoxy Gel:
www.stonecoatcountertops.com/...
Our Floor Patch Epoxy Gel is perfect for filling any gaps or cracks in the concrete for a seamless designer floor. The gel dries quickly and can be sanded and smoothed before painting.
Moisture Seal Epoxy Primer:
www.stonecoatcountertops.com/...
Our epoxy flooring system starts with a moisture seal epoxy primer, which bonds like tree roots and will not fail. This primer is applied over concrete to ensure that your epoxy is secure and will last for years to come.
Flooring Epoxy Midcoat:
www.stonecoatcountertops.com/...
With five epoxy flake color options from Stone Coat Countertop Epoxy, you can easily turn your forgotten garage into a functional finished space to enjoy. Our epoxy flake options come in a variety of colors and sizes, so you can create the perfect look for your space
Flooring Ultimate Topcoat Matte:
www.stonecoatcountertops.com/...
We’ve taken the proven traditional Ultimate Top Coat used in our epoxy countertop system and reformulated it using a unique blend of urathane and proprietary ingrediants. Now you have an even better scratch, stain, and chemical resistance - plus an extended open working time so you can make sure everything gets finished exactly right!
Flooring Tools (bottom of the page)
www.stonecoatcountertops.com/...
Spiked Shoes for Epoxy: amzn.to/3zRyn3G
Flooring squeegee: amzn.to/408WVzW
Epoxy Glide Roller 18’’: amzn.to/411kXxY
Roller Pan 18’’: amzn.to/43ongg4
Roller Extension Pole: amzn.to/43tNhe6
Roller Frame 18’’: amzn.to/3MAa0yQ
Floor Scraper: amzn.to/3mmJkam
Floor Surface Protector: amzn.to/400kFG8
Calcium Chloride Moisture Test: amzn.to/3KRqcdH
7in Angle Grinder: amzn.to/41fh0oQ
7in Diamond Grinder Wheel: amzn.to/3ZVgg7u
7in Dust Shroud for Grinder: amzn.to/41iVH5R
Shop Vac: amzn.to/3zOEVjg
Corded Leaf Blower: amzn.to/3ZZRF1k
How to Coat over Concrete Floors with Metallic Marble Epoxy:
Has your garage floor seen better days, is it full of unsightly cracks, stains, and pits? We’re teaching you step by step how to properly prepare your worn out garage space for Stone Coats Metallic Marble Epoxy Flooring System. We simplified and improved our flooring system for the do it yourselfer. Learn money saving tips and tricks for professional results even on your first floor! Learn right now how to save thousands on your epoxy floor project adding value to your home and giving your garage and other spaces a finished look, come along with me folks I’m showing you every step along the way, Stay tuned and enjoy the video.
About us:
Stone Coat Countertops is an epoxy based CZcams channel that will show you unique ways to DIY your way to an amazing kitchen, bath, resin art, construction, or design project on a budget. We believe in teaching skills in, woodworking, art, epoxy floors, epoxy countertops, and showing how to get realistic results to make your old laminate, tile countertop, formica, concrete countertop, garage floor, and walls look like renewed works of resin art! Simply put we are always looking for our next project to help all the DIY folks, contractors, designers, artists, and hobbyist, tackle their next makeover. Watch our free how to videos on the skills to make your dreams come to life with epoxy resin! Contact us anytime for free project support, (541) 450-1976 You Got This!
Want to learn more about what we do? These are the subjects we cover from start to finish! epoxy, epoxy countertop, epoxy flooring, painting with acrylics, art resin, painting, painting countertops, dirty pour, epoxy metallic, epoxy metallic floor, epoxy table, epoxy resin, epoxy resin table, DIY, woodworking.
#StoneCoatCountertops #epoxy #YouGotThis - Jak na to + styl
Learn more about our new flooring systems here! - www.stonecoatcountertops.com/diy-flooring-epoxy-resin
@@Jo-li5ht very little odor, it has zero VOC's so no need for a mask when you're pouring it out
@@Jo-li5ht yes! you'll just need to abrade it and we pour level quick over that. here's a video on it - czcams.com/video/WJXfqzH3JwU/video.html
Hello
I want to know if the ultimate top coat flooring 100% UV stable
Is there a dealer in Jamaica that sells the raw materials.
Simple and straight to the point great video, I’ve been wanting to get involved with this on my free time as little side hustle
For anyone wanting to start or expand a service company, this looks like a great start
This is the most simple diy epoxy floor tutorial. Well explained. Thanks
It’s beautiful, I’m lucky because my husband already knows how to do this. He’s done flooring and countertops and even a pool once. It’s very striking when it’s done and all dried. Nice job!!😊
He did a pool??? How did he keep it on the side's without sliding?
Hey please can we have a conversation
I just won't to know the items name they use 🥺 the epoxy items
why u watching this video?
2-3 hours After applying the sealer coat white patches started to appear how to fix this ?
good for you .send him to my house
would never have thought that would have turned out so nice. what a masterpiece.
Hey thanks, I'll take it! Would you attempt a project like this?!
@@StoneCoatCountertops yeah, i'd love to do several things you do on your videos, just can't right now. love you and your teams work.
Wow!! What a difference!!
Wonderful Explanatory Presentation
Very nice! thank you!
I can give about 1 million reasons why having the guard on that grinder is crucial.
Give me 10?
No guards no condoms no problem
@@guyonthecouch136 well if stiches count I can give you 30. Bound up in my shirt and nearly disemboweled me. 1-1/2 inches deep. 6 inches long.
@@ryanwoods5493 your not supposed to use the grinder for haberdasherey, may I suggest scissors preferably whilst not wearing the shirt hahaha.. Nah I'm only making fun of the '1 million' reasons, I genuinely hope you have made a full recovery
Looks awsome
PRO TIP! cut a shotgun hole in your epoxy jugs when youre pouring for mixing so you dont have to squeeze it out! love the vids thanks for the tips and content!
CAN YOU TEACH ME MORE IN DEPTH???
Thank you, I appreciate it. Now I can accept the job that I was scared to do.
Thank you ❤
Beautiful job! I did my basement floor yesterday.
Do you think someone who has never done them before can make it look good? lol
@@annlathamit’s possible. Probably not this good. 🙂
@@annlatham Yes! It’s definitely worth a try.
This is a nice video
Great video. Question for ya… I want to do a metallic on my garage floor. I don’t have saw cut control joints. Instead I have the wider tooled joints. I’d rather have a seamless metallic floor so I am looking for a product that I can use to completely fill/over fill my tooled joints and then grind flat with the concrete. @00:38 you are using your “floor patch epoxy gel” to fill that rather wide crack. I’m curious if that would be a good product I could use to fill my tooled control joints? I love your guys stuff. Thanks so very much.
Wow! That's beautiful! Who would choose tile or planks when you could do this? And I'm guessing the durability is insanely good, huh?
I like it. i have a linoleum kitchen floor and wonder if it would work on that
requires several stages but the result is very good 👍👍
Thanks for stopping by! Would you try out a project like this?
What grit sandpaper do I use for each coat ?
Gracias
Zabardast ❤❤
Thanks so much for this tutorial! I have a question. I have a room that is half tile, half cheap vinyl. I want to get rid of the vinyl and put epoxy in its place, but there are no walls or borders between the tile and where I want the epoxy to be. Is there a way to create a form like we'd do when pouring concrete countertops, to create a border that the epoxy won't go past?
Looks amazing!! Is it slippery?
Thanks
You're welcome Thomas! Thanks for stopping by as always!
Hey Mitch, do you have to use the isopropyl alcohol for the bubbles or can you just use the torch instead? Is the alcohol what ends up leaving those small black dots/marks?
What's up folks! Let me know if you have any questions!
Hey man! Love your work bro. Well I want a gallaxy looking color but I cannot decide on the right colors to mix. What would you suggest?
Can I do this over laminate flooring pls ? The flooring has been here for a year in very good condition but can’t find any videos of someone doing the same 😢
What Grit sandpaper do I need for each level of the project
What grit sandpaper did you use before topcoat?
I tried using the harbor freight dust shroud for the angle grinder, but it was either too shallow due to the shroud extending past the cup wheel to where you’d have to dig in too much and the grinding would not be even and gouge, OR with the spacers, one the cup wheel was flush with floor, there were not enough threads left for the retaining ring. I wound up opening doors, windows, with a circuit of 4 carpet fans to vent, and used water on the floor to reduce dust.
That said , any suggestions on a better dust shroud or what have you is appreciated.
I couldn’t rent a walk behind due to it being too heavy to load/unload myself, and not having a trailer or lift gate.
Do walk behinds have vacuum hookups to reduce dust?
I’d love to do more of this, but i can’t find a way to reduce the dust efficiently - it’s really the only showstopper for me
Does this color mixture come in a kit? I want to do this in my kitchen.
Which exact colors did you use? I want to do this exact floor
I've been getting into abstract art and my uncle reccomend your channel. I would love to do something like this! What would be the approximate material costs for a 450ish square foot room?
He said 3$ a square foot
1350$
If I want to do this in a bathroom closet to not have to pull up possible asbestos tile can I just pour concrete over the tile?
My floor is powered concrete. I painted it years ago to keep dust down but now it’s beyond paint.
What do I use?
Can you do an outdoor dance floor with that over plywood
Hello can this be done on concrete counter top?
Can this be done on a mixed substrate floor? I don't have a concrete floor; it's in a mobile home where part is tiled and part is plywood (call it a subfloor but finished with a temporary clearcoat). Can I use a levelling compound and pour on the exisitng floor (I understand prep you mentioned for tiled areas)? Does this epoxy flex after drying?
I'm really interested!
Hey Mitch! Can you answer this above? I'm interested in the same questions above for the same reasons. @stonecoatcountertops
I would like to know also if this can be used on other substrates besides concrete
I have no question at this time. Im much interested, as a beginner, I want to know the materials needed.
Do we need to apply primer first or its just an option?
Is this system long and lasting of we have to do the process every year
This could last for years and years. I've seen a hair shop in town that has this done and their floor still looks steller after a decade of extremely heavy foot traffic and daily chemical exposure.
Can you put epoxy on top of LVP floors?
Can this be done over OSB?
Is it possible to give this a tiled look? Thinking of doing a marble tile look for bathroom or kitchen floors.
It would be difficult to put grout lines in the epoxy flooring. It's usually a seamless designer look without the grout lines.
The best and easy way to do that, is just using tiles instead.
Xoxo
Find a square stamp or stencil that looks like a tile, and maybe paint the “tile look” right on before the top epoxy coat?
Is epoxy coating is a resistant to sunlight????
Do you charge your material cost to your customer or include it in your price per sqft?
Great job! I want to do it ! But I’m a Coward 😢
Curious if this has been applied over vinyl asbestos tile for sealing purposes, rather than abatement? Anyone else try this out? Thanks!!
Hoping you get an answer to your question. I have remnants of aspestos tile on old wood floors. Thinking this would be a good way to seal the asbestos and have a nice floor. Concerned about the weight of the epoxy and the sealant though as it will be on the second floor and the house is old. @Stonecoatcountertops, please answer! A tutorial would be great too~
Same!
Can I cover a Plyboard floor with Epoxy?
How thick is the metallic epoxy?
2-3 hours After applying the sealer coat white patches started to appear how to fix this ?
I tried it but my floor ended up full of holes what do i do now
3$ per square foot is the cost of everything or just the epoxy needed?
should really use a Hepa filter mask when grinding/ cutting concrete, Silica is no joke 😷😷
Can this process be done on sidewalks and driveways?
Yes
Any one no how much epoxy i would need for a 8ft by 4ft please.?
So, do I have to sand down the floor if the concrete floors are painted?
Yes, you want a good foundation for a good bond. Grind open the 1st layer of concrete then clean the dust. The grinder should remove the paint too.
@@StoneCoatCountertops Thanks for replying! I really liked your videos. I'd love to get some of your products, but my basement floor had some of the old adhesive on it when it was painted and I'm not sure if that would come up with sanding. I just don't want to waste my time or money.
Can you give product info?
I wanna hire somebody so they can do my kitchen can you help me with this
Can you apply this over tile? I have 1960s tile
Hi, thanks for checking in! You can go over tile with a few prep steps.
1. rough up the tiles with a 7 or 4 in diamond cup wheel. You can get a dust shroud to eliminate dust in the air.
2. Apply a polymer bonding primer designed for the Level Quick and apply it to the tile and let dry get these products at a hardware store.
3. Mix up and apply the level quick to eliminate the grout, let dry overnight
4 . Apply the moisture seal epoxy primer over the level quick, nice and thin. 1oz. per square foot of floor to cover, apply with a floor squeegee
5. Apply the metallic or dye tinted epoxy flooring midcoat with colors you desire.
6. Apply the Ultimate topcoat in the sheen of your choice.
Let me know if you have any questions, I'd love to help get a project started with you
@StoneCoatCountertops what about plywood subfloor
@@StoneCoatCountertopsyou are such a nice human being wow I thank you for answering the questions so detailed as it useful for us too 🙏🏽🙌🏽😊
How do you clean out oil stains
You can use a concrete oil stain cleaner from your local hardware store or Amazon. It's a liquid paste product that pulls the stain up to the surface before you start to grind the floor.
😍😍😍😍😍😍😍😍😍😍😍😍😍
too nice to walk on
Where can I get the raw materials.
WoW ♥️♥️♥️ (I.T.)
Thanks for stopping by! Do you have a floor to fix up this DIY season?
Hopefully you will respond. My floor is saltillo and uneven?
Hi, thanks for checking in! You can go over tile with a few prep steps.
1. rough up the tiles with a 7 or 4 in diamond cup wheel. You can get a dust shroud to eliminate dust in the air.
2. Apply a polymer bonding primer designed for the Level Quick and apply it to the tile and let dry get these products at a hardware store.
3. Mix up and apply the level quick to eliminate the grout, let dry overnight
4 . Apply the moisture seal epoxy primer over the level quick, nice and thin. 1oz. per square foot of floor to cover, apply with a floor squeegee
5. Apply the metallic or dye tinted epoxy flooring midcoat with colors you desire.
6. Apply the Ultimate topcoat in the sheen of your choice.
Let me know if you have any questions, I'd love to help get a project started with you
Please can I asked questions
As a beginner
The materia you use you didn't list it for Us
Please can you list it for me or you guys have a channel that list the item please 🥺
Check out this video, it is our longer form video with all the helpful links you're looking for: czcams.com/video/wBSycZRQrGw/video.html
@@StoneCoatCountertops thank you
What's your slippers?
amzn.to/46FcIuB
You saying sand but what grade?
Can you use this in a shower floor?
if you want to slip and die
just a joke 🙏
Can you be hired?
It’s very important not to skip this step!
*skips*
Dude died of silicosis a week later.
What are you saying it's not safe the product
@margaretdetraz3525 LOL no it's not.... high VOCs it can cause brain damage without a respirator. Originally, I was pointing out prepping the concrete in a small space without any sort of protection.
$3 per sqft? Meaning it would cost $15k to do my 5,000 sqft shop myself? That’s ridiculous.
Agree, it can't be that expensive. Tiles would be way cheaper in that world
But if you bought all the tools you could definitely do it yourself
No me gusto xq no muestras los productos k usas 👎
I don't like the color. It looks old and dirty, Black and white would be nice.