40oz Tumbler Wrap - Full Wrap Tutorial - Laser Engraving

Sdílet
Vložit
  • čas přidán 27. 08. 2024
  • Hey Everyone! This is a video I put together using my OMTech 150W laser to engrave some 40 oz stanley dupe tumblers. I am going to be going over my whole process of the steps I take to engrave a full wrap onto a 40 oz tumbler.
    These full wrap 40 oz cups are a huge hit, and everyone is absolutely loving them! They look amazing when done properly and would highly recommend giving it a try!
    Below are some links to websites referenced in the video.
    Links:
    OMTech Website: omtechlaser.co...
    xTool Website: www.xtool.com/...
    Lightburn: lightburnsoftw...
    Website: www.sodacitybo...
    Facebook: / sodacityboards
    Laser Material Settings:
    docs.google.co...

Komentáře • 17

  • @meganmaestas1186
    @meganmaestas1186 Před 22 dny

    Thorough tutorial, thank you for sharing. May I please ask where you purchased the tumbler wrap file from?

    • @SodaCityBoards
      @SodaCityBoards  Před 16 dny

      I believe this was from Etsy but couldn’t tell you to be honest.

  • @bigfranksworld
    @bigfranksworld Před 7 měsíci

    So for focus, you are doing your regular focus length at the top and bottom? I see some people doing that, but adding 3mm to their focal length.

    • @SodaCityBoards
      @SodaCityBoards  Před 7 měsíci

      Yes same focal distance at the top and the bottom. Not adding anything to it

  • @john3980
    @john3980 Před 9 měsíci

    Great video my man
    I’m about to purchase omtech mf 2028 80w laser with piburn
    How long did that full wrap take for you?
    Also I do more basic tumblers like half wrap on Stanley’s right now just 4-5 flowers
    How long do you think that would take
    My current xtool d1 10w hobby is so slow takes 1 hour and 10 mins lol
    I’m looking to see if I can get like 6-20 mins with this one

    • @SodaCityBoards
      @SodaCityBoards  Před 9 měsíci

      If i am just doing a simple logo on a tumbler it takes 2-3 minutes, full wraps about 45-60 (could probably find higher speed and power settings but im happy with what ive got so havent tried to)
      i may be getting another 80W as well

  • @user-db4pc5cx9z
    @user-db4pc5cx9z Před 8 měsíci

    I am about to install my piburn 4.0 for my af2028 60w , piburn suggests 5000 or 12500 per rotation , how is yours working on 360?

    • @SodaCityBoards
      @SodaCityBoards  Před 7 měsíci

      I didn’t realize but before I clicked start on the laser I noticed and switched that to 12,300 which is what mine was!

  • @john3980
    @john3980 Před 7 měsíci

    Bro I just bought a omtech af2028 60w
    I got a piburn 4.0
    Did the suggested settings
    12500
    63mm
    Got the right size for the tumbler which is 99’m like you did
    My edges come out pixelated not smooth
    Any ideas why?

    • @SodaCityBoards
      @SodaCityBoards  Před 7 měsíci +1

      Hello! So I actually just replaced my 150w laser with 3 AF2028 80w machines.
      Did you do a square test on a tumbler? Do a 30x30 square in lightburn and run it on your OMTech and see if it is actually 30x30 (if it isn’t you need to adjust your steps until it is! 😁

    • @john3980
      @john3980 Před 7 měsíci

      @@SodaCityBoards I’m going to try and update you on that one
      I checked my dip switches and they are all correct on the Y axis 5000 which is times 2.5 gives me 12500
      Also to get rid of those edges I have to lower my interval to .7 AT LEAST but I seen people do very smooth curves and designs with only .1 interval
      What settings do you use if you don’t mind me asking, we shouldn’t have much of a difffwrent between our machines

    • @john3980
      @john3980 Před 7 měsíci

      @@SodaCityBoards 30x30 mm ?

    • @SodaCityBoards
      @SodaCityBoards  Před 7 měsíci

      Yeah 30mm x 30mm
      Sorry my CZcams didn’t show me I had a reply!

  • @merr_ello
    @merr_ello Před 2 měsíci

    Im in Florida, is there anyone in here who I can ay to do some cups ?

    • @SodaCityBoards
      @SodaCityBoards  Před 2 měsíci

      If you reach out on our Facebook page - soda city boards we can knock them out

  • @josephdunston9378
    @josephdunston9378 Před 5 měsíci

    Where did you get your 40oz tumbmers?