b48 + b44 Tutorial - Overlock threading (3/15)
Vložit
- čas přidán 22. 08. 2024
- Further information is available at www.mybernette.com
This video tutorial shows you how to correctly thread your b48 or b44 for overlock stitches. After you have set the needles to the highest position, you can raise the presser foot. Now the thread tensions are released, and you can thread starting with the upper looper into the blue color-coded guides. For the lower looper, you afterwards thread the red guides. The video then shows you how to thread the right overlock needle (green guides) and the left overlock needle via the yellow guides. If you follow the video step by step, threading your overlocker is really simple.
Thank you so much! I was about to give after some unsuccessful tries. Thanks to your tutorial, I have succeeded at last!!! 😅
This was extremely helpful! First time user! THANK YOU!
I always come back to this video. For some reason I always struggle with red.
Dear Charmaine. Thanks for your feedback. We understand that you find required information in the video tutorial, or do you have a specific question? Kind regards
I could not find the little bump for the last step of of threading the lower looper.
I wish you had a better diagram.
Hello Tatyana, thank you for your inquiry.
If you refer to the last step of threading the lower looper, please check again the video seqence:
czcams.com/video/oyBTccc7twk/video.html&
(from timecode 01:50 to 02:15)
We realize it is a bit unclear as the finger touches the lever at 02:03 is just at the lower edge of the picture.
Omgosh thank you thank you thank you!!!
Thanks for the video, is very helpfull. The machine comes with threads?
Hi Ivy, thanks for your feedback and inquiry. No, this bernette machine does not come with threads. But you have reached us at the bernette headquarters and supply may vary from country to country. So please feel free to negotiate with your local dealer for a special deal. We wish you fun and pleasure sewing with your new bernette overlocker.
thanks
You're welcome!
❤
Why does my red one keep coming out of the tension disk?
Dear Amanda, a good question, but not easy to reply from a remote desk without more details about handling or machine condition. We propose you check the threading path, pre-tension threading and tension threading and threading of the guide just under the edge of the cover after your red (and blue) tension dial. Assuming you had the foot raised when threading, the tension disk should close upon lowering the foot. Try stitching with the tension set to 4, 3, 2 and 1 and see if it makes a difference in thread jumping out or stitch quality. You may want to use a piece of paper and go between the open tension disks to check/clean out any thread remains or dust that prevents proper closing of the tension disks. If the issue continues, you may want to see your authorized bernette dealer for an analysis and solution to that issue. We wish you happy sewing with your bernette!
thx for this video but i need one for b48. this one is only for b44. can you make a complete video for b48 ?
Hi Tanya, the video is valid for both machines b48 und b44. The video title tells you for which bernette machines the video is valid. For more bernette overlock videos click on the following link: czcams.com/play/PLP_mDUnCAVpx5hhnQYHEeIJn0JTgcwrU5.html
Thanks for your answer. Sorry but on this video we don t see how we should do with the violet. I hope you can understand me ;)))
Hi Tanya, please refer to this video to see how the purple chainstitch looper is threaded on b48 and b42. It is referring to the purple coded threading path, but filmed on the b42. Both models have the purple coded path and the thread travels the same guides: czcams.com/video/D-eFdKVZru8/video.html
Заправка нитей.
Ich schaffe immer noch nicht die Maschine zu bedienen, helfen sie mir bitte!
Unter dem folgenden Link findest du einen Fachhändler in deiner Umgebung, der dir gerne weiterhilft: www.bernette.com/dealersearch
Always happened to me too since the very first day…tired
My b48 won't thread a chain, I've tried retreading several times and changed needles, please help
Dear Cherry, it's hard to solve your problem from the distance. Please get in contact with your BERNINA dealer or your local BERNINA country organization through the contact page on mybernette.com.
I know this a bit late but if anyone with a b48 is still having trouble getting their overlock to chain on a b48, I have just realised what I was doing wrong. I was threading the chain looper eye of the purple path instead of the middle eye of the upper looper on the red path. A specific video of the b48 would be super helpful on this, as the diagrams in the book do not show all the possible threading paths together.
What size needle????
Hi Peggy, we recommend to use needle type ELX705 CF (ELX705 SUK CF).
Recently purchased this machine and I can honestly say I do not like the Bernina corporation. I would say they have really bad customer service if they had any. I always wanted a Bernina and now regret this purchase. If you want support this is not the company for you. No phone numbers provided and do not respond to your e-mail. Tools left out in the machine along with threads and materials. I would expect this from Walmart.
Hi! Where did you buy your Bernina / Bernette? Which country? Best wishes from Switzerland ♥
@@by_katrin I purchased the bernette in the U.S. I was very disappointed that they don't really have customer service. This is unusual from a reputable brand and in this country.
@@laurac7450 Indeed, very unusual. You know Bernina in Switzerland are known for their excellent customer service, but you can't reach the company itself, they will always tell you to go to your BERNINA Authorized Dealer where you bought the sewing machine. Try to reach out for your dealer. Good luck! Best wishes from Switzerland ♥
Dear Laura C, We are very sorry to hear that your experience in being a bernette customer is not the best one. As you did not specify where you bought the machine, it is difficult to make a statement, however, your dealer of trust should be able to support you in using the product or service it. Of course, the bernette/BERNINA distributor in your country will concentrate on supporting your dealer providing this service to its best. We can not verify where you are and strongly recommend that you contact your dealer, trusting that this is a first step to customer satisfaction.
@@Mybernette When I had questions no phone number was provided nor could I find one on line. I sent an e-mail, which took Bernina over a week to reply. They response was we will have the sewing center contact you nor did they ask what the issue was. I was never contacted by the dealer or did Bernina follow up if the issue was resolved.
I solved the issue myself.
Rrrrrrrrrrd. When I first played this a lady was talking. Now all I get is annoying music that doesn’t help me at all. Grrrrrrrrrrrr
Hi Diane, in the bernette videos we do not use spoken language, instead we use subtitles, which are available in different languages. The subtitles can be enabled or disabled in the video settings (bottom right of the video) and you can select the language English for example.
You have the wrong video. Here is the link for that one czcams.com/video/bzDtZ32HXc4/video.html
visto
music is awful and ofputting
Dear Melanie, thanks for your comment. Can you please let us know what kind of music you would prefer on a tutorial video? We will then gladly forward your suggestion to the video production team.
well rather than music have the nice girl who is running the machines explain everything! I just got this machine and although I got the book I am visual but want the person to actually tell us especially when threading I spent four hours trying to find the little drawer when threading the looper threads I found it now but it would be nice if there is an actual voice there rather than the music. thanks for your speedy reply back its nice to know there is someone looking at our comments
@@Miss_Melly_D Hi Melanie, thank you for your feedback. We use subtitles instead of voice-over because this makes it possible to stop the video any time and still get the message, even with the speakers turned off (e.g. on mobile devices). Another advantage of the subtitles is that search engines can see captions, which helps our users find the videos they need. Last but not least, subtitles are also better to understand for the hearing impaired. Hope you will understand. Best regards from Switzerland
I agree!