Stationeers S1E20 - Mimas - H2 Combustor and Solar Expansion

I start with a side project, creating Soy Oil from Soybeans using the Reagent Processor. This enables us to start creating canned food, so we're back to tier 3 food. The next task is to set up an H2 Combustor. I decided to filter the output from the Combustor, so the Steam is separated, this will make it easier to deal with condensation. Cooling the steam will be done by with a Large Direct Heat Exchanger attached to the Stirling Engine gas loop. After recording I've noticed the steam doesn't cool quickly enough, so I will need to make some tweaks to get it working properly.

[@RoadHouse0428]

22:02 you can always write the power production to a display as well as temperature control and not allow the “exhaust pump” to pump with pollutants present in the pipe

[@ossorakgaming]

Yes, I could write to a display, I've still been designing stuff trying to save power when I can, but in this instance I don't really need to. As for the pollutants, I've got to come up with a solution there, I think maybe I'll send in enough gas to make sure it'll all condense (and as you suggested check the pollutants content).

[@RoadHouse0428]

@@ossorakgaming using a gas pipe analyzer to check ”l r0 d# or defined ID RatioPollutants” this will give you a 0.00 read set a pressure regulator to come on and pump to desired pressure for pollutant condensation. I would suggest upgrading to a turbo pump and an isolated tank to absorb the heat or transfer to another system so it can pump and pull out the heat before you pump it in your base.

[@RoadHouse0428]

🎉🎉

[@ossorakgaming]

👋