thanks engineer.your tutorial has completed my worries.it was simple,and straight forward.i am a cameroonian who has passion for structural design.it is my wish you be my mentor.
You are welcome dear .... thank you for nice feedback.... please like and subscribe, it really helps me when i get likes on my videos..... you can write to me your question on monimalikn73@gmail.com .... i will try to make videos on them
jags.. one request to you if you can upload video 2storey building and in that you solving error msg in staad pro as well as going from foundation to terrace in details and explaining also..I knw it take a very long video such as an hour but if you could help me than it be good to do my final year project.. pls can you help me...
useful and very informative. Really appreciate your work. But i wanna inquire, Can we design Isolated footing and Combined Footing simultaneously in One Multi-Storied Structure (Say G+6 structure, and footing design required for both isolated and combined footing). Would be grateful if you can clarify my doubt.
Thank you for such a nice feedback.... and for your question we can’t do both at the same time .... need to do separately..... I request you to like the videos to support me and subscribe for upcoming videos Let me know if you have any doubts.... i will try to solve them as much as i can
Aasif Altaf thanks dear for ur appreciation.......I have few video on AutoCAD on my channel ....kindly share all videos with your friends on Facebook and WhatsApp as much as u can
Ashish Mishra u are welcome dear..... kindly watch other videos too for staad and please share my videos with your friends on Facebook and WhatsApp as much as u can
Also make an video on eccentric footing design. Because we have to design a building which is covered by surrounding building. So in this case we can go with normalfooting.
Great presentation sir. I wish if you could make presentation for building design for two storied building with CGI roofing truss and isolated foundation
Sir I have a lot of question like why select fixed and from where u select 0.2D and How we will know weather it’s safe or not....really confused about it...thanks
I love the tutorial though there is one point you have made an error. Deep and shallow foundations are not determined by depth, but rather by the type. Pad and mat foundations are shallow foundations even if they go 10m deep. Pile foundations are deep foundations even if it is 3m deep. Otherwise, I love the tutorial.
what all load combinations to consider for the fdn design ? I have 40 different combinations . Should I take 1xDL + 1xLL only ? pl respond. great tutorial as always .
Hi sir I am facing one problem while starting foundation design.one pop up comes as attempted unsupported operations.how this can be resolved.please suggest.
Hola soy tu seguidor pero te pediría de favor siempre dieras en todos tus videos la opción de configurar el idioma a español por favor, saludos desde México.
Bro when try to open foundation desgin . Here 1. foundation design option 2 . Use all supports 3. Avaliable all cases and include all 4 . Run staad foundation Here is The problem 4 step run stadd foundation . It shows could not open staad foundation application .
Hello sir i have followed all your steps but when it comes to foundation design steps after I have clicked include all , run stadd foundation In the bottom is not coming ? Is there a problem with my software or laptop . Please help
bro staad pro is working but staad foundation is not working. when i click foundation design in staad pro i dont get the option of Run staad foundation neither Run staad foundation advance. COULD YOU GUIDE ME.
Good job Sir Professor pls help how could i remove the top bar reinforcement in the isolated footing.. As I notice in your detail the top reinforcement are present ... thanks a lot...As i Notice sir in the drawing detail time 12.55 in your video.. thnx
@@Jags22079 but in my case when I start to enable detailed drawing option it will terminate at that time.. Now i need to design foundation for peb structure as pedestal column.can you help in this?
Sir Professor pls help how could i remove the top bar reinforcement in the isolated footing.. As I notice in your detail the top reinforcement are present ... thanks a lot
why my staad pro foundation is not working, when i am open it "SELECT licence type is not configured yet. please run"SELECT license Assistant " to configure it " this msg show please get me out
Hello! Can I design my own foundation on this software and then check if it's appropiate for its loads? PS: Your videos have been very helpful for me, thanks a lot.
Yes i have made a new video jis me show kia h k keha se download ker skte ho and kese install ker k free me activate ker skte h kindly watch that video and subscribe to the channel
Bro u r a champ.
I completed my B tech project watching ur videos.
May god bless you with everything you dream of❤🎉.....
So happy to read your comment....thanks.. Please Like and Subscribe to support my channel..best wishes for your future 🙏
thanks engineer.your tutorial has completed my worries.it was simple,and straight forward.i am a cameroonian who has passion for structural design.it is my wish you be my mentor.
nice video sir
Thank you dear ..... like and subscribe to support the channel
Very much helpful topic. Many many thanks
goo presentation. well done. continue to share such rich information with your subscribers.
Helpful and Clear, I was amused by how u said..'Schedule' you nailed my man, great vid
Nice video sir
Thank you
Bhut aachi video h sir..
Thank u dear
Dear sir, really appreciate your efforts. this video very use full to me. thanks sir.
Awesome Jags, Appreciating job ... helpful vedios
Tek Nath thank you bro.. kindly like subscribe n share the videos to motivate
Thanks sir.... Such a great and helpful video for me.💐
You are welcome dear .... thank you for nice feedback.... please like and subscribe, it really helps me when i get likes on my videos..... you can write to me your question on monimalikn73@gmail.com .... i will try to make videos on them
superb video...best ever online tutorial..all the best for future...👍👍👍👍👍👍
saurabh roy your feedback made my day.....keep watching and kindly share with your friends
jags.. one request to you if you can upload video 2storey building and in that you solving error msg in staad pro as well as going from foundation to terrace in details and explaining also..I knw it take a very long video such as an hour but if you could help me than it be good to do my final year project.. pls can you help me...
Great presentation ; thanks
Thank you dear for such good feedback…. Please Like and Subscribe to support my channel, it really helps
i like your video. VERY INFORMATIVE. THUMBS UP!
RVCARANTO CONSTRUCTION thanks dear
Good job Jags. Appreciate your work!
gerard Peter thank u so much for such appriciation....... kindly watch other videos too on vast topics on my channel
Thank you dear
it is of valuable info..tq sir
You are welcome..... please like the video to support me
vry nyc sir......waiting for advanc fundtn desgin videos
awesome and easy tutorial
great very useful to me please do more
Thank u
Useful Video. Thank you...
You are welcome..... please like the video to support me
This is a nice video.pl place a video for mat footing of a building.
useful and very informative. Really appreciate your work. But i wanna inquire, Can we design Isolated footing and Combined Footing simultaneously in One Multi-Storied Structure (Say G+6 structure, and footing design required for both isolated and combined footing). Would be grateful if you can clarify my doubt.
Thank you for such a nice feedback.... and for your question we can’t do both at the same time .... need to do separately.....
I request you to like the videos to support me and subscribe for upcoming videos
Let me know if you have any doubts.... i will try to solve them as much as i can
Thank you so much sir...it is very useful viedo.
thank you very much sir🧡
great work sir!
really appreciate your efforts.
Please do a full series of videos for autocad 2014 .
Aasif Altaf thanks dear for ur appreciation.......I have few video on AutoCAD on my channel ....kindly share all videos with your friends on Facebook and WhatsApp as much as u can
Thanku sir🎉
You are welcome... please Like and Subscribe to support my channel
Very clear on lisining, thankyou and i request you to please add mat foundation tutorial...
and also if wi have comibine footings, in case of at expansion joint?
really helpful video... thankyou for sharing !!
Ashish Mishra u are welcome dear..... kindly watch other videos too for staad and please share my videos with your friends on Facebook and WhatsApp as much as u can
ok brother i will share the links with my frnds also.
Ashish Mishra lots of thanks...feel free to ask for any doubt
Also make an video on eccentric footing design. Because we have to design a building which is covered by surrounding building. So in this case we can go with normalfooting.
Thank you
You are welcome.... please like the video to support the channel, it really helps me to reach more people
Great presentation sir. I wish if you could make presentation for building design for two storied building with CGI roofing truss and isolated foundation
Very nice video .thanks i am also using staad pro . While designing mat foundation meshing has been done . But unable yo perform analysis. Pl help
Sir I have a lot of question like why select fixed and from where u select 0.2D and How we will know weather it’s safe or not....really confused about it...thanks
You have made this video for others to learn or for your practice?
Can we do Eccentric footing design as well ??????
Yes .... please like the video and subscribe to help and motivate me
Bro can u make a pump house of 500 kl in Jaipur
I love the tutorial though there is one point you have made an error. Deep and shallow foundations are not determined by depth, but rather by the type. Pad and mat foundations are shallow foundations even if they go 10m deep. Pile foundations are deep foundations even if it is 3m deep. Otherwise, I love the tutorial.
Tha k you for your honest review... and thank you for correcting me .... like and subscribe to support the channel
Good video. Thanks.
Rcc water tank circular and rectangular for overhead aur underground ke liye design ki videos hai??
Hi Sir, what if we need to check result and optimise it?
what all load combinations to consider for the fdn design ? I have 40 different combinations . Should I take 1xDL + 1xLL only ? pl respond. great tutorial as always .
i too need this one ,please help me if you know this to this gmail shaikkhaleel340@gmail.com
Great video brother. i want to know How much accurate is STAAD PRO in struture design compared to the structure design calculated manually ?
REALLY HELPFULL THANKYOU TO BOTH OF YOU
U r welcome
Sir why are you all cobination load including stadd foundation ???, This load larg amount of load
Can we adjust foundation size 3m is too much
Yes we can as per our requirements..... please like the video to support the channel.... it really helps me to reach more people
If we want to make it on single bottom mesh then?
good job plz shear mat foundation also, and whenever any plan I want to some isolated and some mat some combine so how to complete work
Hi sir
I am facing one problem while starting foundation design.one pop up comes as attempted unsupported operations.how this can be resolved.please suggest.
Brother from where do we know about depth of foundation ?
Hola soy tu seguidor pero te pediría de favor siempre dieras en todos tus videos la opción de configurar el idioma a español por favor, saludos desde México.
Bro when try to open foundation desgin .
Here 1. foundation design option
2 . Use all supports
3. Avaliable all cases and include all
4 . Run staad foundation
Here is The problem 4 step run stadd foundation .
It shows could not open staad foundation application .
Upto how much level soil bearing strength is considered good
Hello. Is it possible to fix overall depth including pedestral and footing to particular value?
i think yes ....i haven't tried particularly.......try it and send me file ....please share videos ....
Thank you for the video sir.
Can you make a video which depicts about the design of mat and pile foundation??
nicely explained !!
Hello sir i have followed all your steps but when it comes to foundation design steps after I have clicked include all , run stadd foundation In the bottom is not coming ? Is there a problem with my software or laptop . Please help
Hi thank you... I can’t say it without seeing.... please like my videos to support the channel
U get my point right what I mean to say ?
Yes, is your staad pro licensed version
After selecting the load for foundation design in my staadpro Run STAAD foundation command is not visible ...
you are using licenced vesion ? what is different in crack & licenced structure design ? and how much for licenced version?
Thank you sir... please make a video on combine footing please
Bro how to fix the dimensions of beam and column please tell me btw thanks for the video
very nice video sir.
i have doubt in design and analysis of strip footing in staad pro, can you give some idea?
cool.....good
Praveen PL kindly share with friends and hit like button
bro staad pro is working but staad foundation is not working. when i click foundation design in staad pro i dont get the option of Run staad foundation neither Run staad foundation advance. COULD YOU GUIDE ME.
Hello sir I am doing project on soil structure interaction on electric tower can you help me how to design soil and soil interaction
please create model of pile cap especially 3 group pile using FEM model
Good job Sir Professor pls help how could i remove the top bar reinforcement in the isolated footing.. As I notice in your detail the top reinforcement are present ... thanks a lot...As i Notice sir in the drawing detail time 12.55 in your video.. thnx
Brother i need to check that i i will try to make a video for that .... thank u
how staad pro drawing output export in AutoCAD?
Hi my staad foundation often terminated when using what may be the issue?
It sometimes happens with me as well but not too often.....
@@Jags22079 but in my case when I start to enable detailed drawing option it will terminate at that time..
Now i need to design foundation for peb structure as pedestal column.can you help in this?
Thanks a lot for this vid bro....
What is the depth of foundations from GL
What to do when run the analysis get the message failed to generate sheet
sir,u havnt assigned live load & load combinations...is it fine?
Sir Professor pls help how could i remove the top bar reinforcement in the isolated footing.. As I notice in your detail the top reinforcement are present ... thanks a lot
As i Notice sir in the drawing detail time 12.55 in your video.. thnx
why my staad pro foundation is not working, when i am open it "SELECT licence type is not configured yet. please run"SELECT license Assistant " to configure it " this msg show please get me out
How to print isofoot design summary?
I need Staad pro ss4 software will you please provide link
awesome . thank you
how to consider pedestal ?
Jags, i cannot go to foundation when i click the foundation above
Thanks buddy
**good
Bob Robert thanks...kindly share with friends...
How to design eccentric footing
Foundation command not work please solve this problem
Good job please suggest me codes
Thank you so much, I got it...
Video is not clear, what are you doing. Please clear this. Thank yoy
Loads & factors are to be assigned or not?
Kishor Behera yes
how to design for eccentric footing
sir how to save all these 3 diff drawings ?
Hello.
where to find this program
Sir eccentric footing design karu???
After the analysis what do notes over there say about???
Sorry didn’t get your question
When we analyse we can see error warnings and notes... over that what do notes represent or say about.
in this video 3.51 we can see error warnings and notes.it says about "one way slab" what is it about??? did you get that.
Sir what to do if foundation overlaps
I am working on foundation video of a live project... it will be posted soon .... please like the video to support and subscribe for upcoming video
Go for combined footing
thank you sir
hala hamed u r welcome..kindly share the video
Hello! Can I design my own foundation on this software and then check if it's appropiate for its loads?
PS: Your videos have been very helpful for me, thanks a lot.
I want this series of staad pro please provide link please
here is the link: czcams.com/play/PLaf0BlcqDxZszPWNVsctz_wm79_aMulFH.html
kindly share the video as much as u can
staad pro software link. I am already your subscriber. please provide software new version link. that you are used in video
manikanta goli
archive.org/details/BentleySTAADProV8iSELECTSeries520.07.10.64
please send software link
Thx a lot bro, can u pls provide me witha crack for ss4 version?
Sir ap bata sakte kaise install kore
Yes i have made a new video jis me show kia h k keha se download ker skte ho and kese install ker k free me activate ker skte h kindly watch that video and subscribe to the channel
Also how to safe those calculation sheets ?