Chevrolet Silverado (Programming Garage Door Opener)
Vložit
- čas přidán 17. 04. 2018
- This video shows you how to program a Chevrolet Silverado or GMC Sierra Garage Door opener integrated into the truck in less than a minute.
Contact me at dpturner486@gmail.com - Auta a dopravní prostředky
To clear the existing memory, hold the 1st and 3rd simultaneously until the light flashes. About 10 secs.
just got a 2022 and your vid hooked me up in 5 seconds to be able to use the button in the truck to open the Garage door!!!! Thank you
I tried on my 2016 1500 silverado and it worked. Great vid. Straight to the point.
Perfect. Quick and easy to follow steps. Thank you.
For anyone that it’s still not connecting make sure you’ve cleared out other garage door connections by holding the first and third opener buttons. Also, depending on your garage opener you may have to hold the learn button on the garage door opener logic board until it lights up then hold the button you just set. It will take a few seconds and then it will learn it.
Only video that worked, quick and EZ, thanks
Just got '18 centennial edition and I am learning and getting ideas from your vids! Thanks.
Thank you!!!!!👏👏👏👏 Works like a charm!
Awesome video 👍
I like this dude...he makes it fast and simple on how tos..to the point
Thank you! Super easy details.
Thank you it worked great
What if the lights do not come on at all? I bought it used no clue if it had any programmed or not on it
how do you delete existing grage doors?
Hold buttons 1 and 3 until it blinks fast.
After programming using the remote fob, does the remote fob controller still function?
I have a question...
Is the button that you hold on the garage fob is the one you open the garage door right? So you hold the garage door button on the fob and whatever number you like to have it programmed. Am I understanding you?
Thank you 👍
Very easy thanks
Super easy with your video 👍🏻
Can you have two vehicles programed? Once I set up my wife's X5, my 17 GMC buttons will not open garage. Thanks.
What can I do if my 2014 chevy doesn't have any of those buttons ? Where would they be?
2019 hc did not work, light blinked fast, but when I let go it did not open the door
Worked great, but had to clear mine first. Better video would have shown the extra 30 seconds it takes to clear codes in the same video.
Yeah.....
Thanks it took a second or two so easy.
How do you program it if you don’t have the garage FOB. Just using learn button on garage door opener?
Thank you so much
Will this work on a 2011 & 2013 Silverado
Good afternoon Dustin. I have the same 2014 High Country. My question, does it have the capability to lower all the windows with the fob?
Unfortunately this didn’t come along until 2015. We are out of luck!
Nice. Thanks. Quick and to the point. Wondering if there is a heated mirror option. I don’t see a button anywhere.
U ever find it?
In my 2014 z71 the heated mirrors are turned on when you turn on rear defrost.
Easy that way. Thanks
Thanks alot
Thanks!!!!
Just got a 2021 gmc can't get my truck to connect to garage
Whats your take on the Active Fuel Management system that V4/V8 mode, is it a good or bad thing?
I’ve always heard it’s bad for the motor. Makes lifters fail and stuff like that. I ordered a Diablo sport tuner and tuned the truck and shut that off. About 500 bucks. Another thing you can do for around1500 is get the cam lifters and other stuff and have it basically rebuilt to delete it
You have awesome videos 👍, I have a 99 Chevy Z71 that a air flow problems the control on the dash don’t work it flows out the vents in the back of the truck but not in the front, would you have any idea if it’s the control or under the dash
Hey thanks buddy! That’s an odd problem.... I’ll do some research on it. Not sure what it might be off the top of my head
Dustin T thanks, the switch that turns from vents to defrost does not work, I’m thinking it the Controls on the dash but not sure, your in Arkansas I’m outside of Springfield Missouri
likely it is the blend door motor or possibly the control but unlikely
What if you don’t have the fob for your garage door
Have you thought about doing the front end swap to give your truck a newer look.
Yeah I’ve looked into it, but it’s really expensive. It looks like you need the headlights, a harness, Hood, and grill. It did stink they only ran this model 2 years before they made a new look...
Yea and they're about to switch it up again
Thanks
What if you don’t have the fob?
How do you reset your three buttons
Clear garage opener buttons
Video starts at 1:38
I was wondering what them buttons were for lol.
I did everything that you said still didn't program
it doesnt work if you have an older truck with a new door opener
What is older? 2015? My remotes are just a couppe years older than 2015. When following the instructions, the lights on the truck buttons are doing what it should be, but in the end, it won't open or close the garage. Frustrating.
Wow. So easy 😂
What’s that Intro song
Por si alcaso - herencia de patrones
The name of the song is:
The Brooklyn Way
By Notorious B. I. G.
It don't work on my 2013 Silverado
How do you clear it out?
I think you hold button 1 and 3 (both buttons on each side) until the little red light flashes
I think you hold button 1 and 3 (both buttons on each side) until the little red light flashes
I think you hold button 1 and 3 (both buttons on each side) until the little red light flashes
Thank you
am i the only one that noticed that his passenger reverse light was out 🤣
Yeah ..do a video on how too program a garage door too your truck 😂
to, not too
Seriously couldn't take 2 seconds to tell us how to clear it before you programmed it. You know most people are buying used trucks
Long meaningless intos waste time