2020 WRX STI Brake Rotors & Pads - DBA T3000 Hawk 5.0
Vložit
- čas přidán 18. 06. 2023
- Not a how to completely because im not a mechanic this is a hobby and this is how i did my brake rotor and pad replacement
Parts
Rotors = DBA 4000 Series T3 Slotted
Front = DBB43050S-10
Rear = DBB43051S-10
Pads = hawk hps 5.0 brake pads
Front = HB616B.607
Rear = HB914B.580
TOOLS AND STUFF I USED
-3/8 RACTHET
- FLAT HEAD SCREW DRIVER
- BREAKER BAR FOR LUG NUTS
-19 MM SOCKET (LUG NUTS & FRONT CALIPER BOLTS)
-17 MM SOCKET ( BRAKE CALIPER BOLTS REAR)
-13 MM SOCKET ( BOLT THAT HOLDS FRONT BRAKE PAD HARDWARE )
- TORQUE WRENCH
- PUNCH PIN TOOL "TORPEDO"
- 5 POUND ORANGE MALLET
- METAL MALLET TO SMACK RUSTED ROTOR OFF
- METAL BRUSH
- PERMATEX ANTI-SEIZE LUBE #80078
- BRAKE PARTS CLEANER - Auta a dopravní prostředky
Have u been hearing any clanking from the front ? I heard that was an issue with those pads since there is no shims
i thought i would to but no quiet as can be without the shims
also i do have a ets cat back thats kinda loud but even in stop and go traffic i dont hear anything
@@Dr_hehe thanks man I just bought these exact pads, I’m running a tomei so I probably won’t hear anything either lol
what did you torque all the bolts to?
Off the top of my head I know the front bracket bolts are 59 ft/lb - Pins - 20 ft/lb...the rear may be the same
Is it the same for the rear?
Rotors = DBA 4000 Series T3 Slotted
Front = DBB43050S-10
Rear = DBB43051S-10
Pads = hawk hps 5.0 brake pads
Front = HB616B.607
Rear = HB914B.580