Favorite Scribing Tools - Trend Easy Scribe and Hock Marking Knife
Vložit
- čas přidán 5. 08. 2018
- Jobsite application of how I scribe with The Hock Marking Knife - geni.us/0ESMM on Amazon (commissions earned) and
The Trend Easy Scribe - geni.us/xOaQa on Amazon (commissions earned)
Easy Scribe Lead Refills - geni.us/8wcMjBP on Amazon (commissions earned)
Insider Carpentry Amazon Storefront - www.amazon.com/shop/insider_c...
Favorite Scribing Tools List - www.amazon.com/shop/insider_c...
Spencer is absolutely the best at showing us how to do perfect scribing and to tell us the best tools to use. He’s an invaluable resource and I so appreciate that he shares all his expertise in such great videos.
No doubt you the best Chanel in America. Could you make a series about decks? Teaching everything from the very beginning? And stairs also from the very beginning
Killer. Nobody’s doing this quality finish carpentry content on here. Keep it up!
Thanks for the tips.
I would use the masking tape to secure the spacers from falling off.
I am pleased to see your high quality work - and your tool choices, i.e. Festool and Lie Nielson show in your craftsmanship.
I'm blown away with the quality of your work. You do everything perfect.
And not just in this video. Every video I’ve watched it’s the same level of quality.
Just ordered the knife and Easy Scribe. Love watching your videos. Keep it up Spencer.
I learn something new every single time I watch. Thank brother, I appreciate it.
Great video. Love how you are adding value to the community. Your IG Page is awesome look forward to more videos.
Great job young man I've been a Master Carpenter General Contractor for over thirty five years and you have impressed me if you always take this much pride in your work you'll always have a pocket full of money thumbs up my friend I will subscribe great job
Your first video is just as good as the other ones on your channel. Impressive.
Thanks for the video. Your a great craftsman!! 👍🏽
Legit video dude, please make more!
Great video man! These ones are more educational compare to your IG. Waiting on more to come!!! Thanks
Thanks for the helpful suggestions like always awesome work
Outstanding workmanship! Poplar is such a nice paint grade wood to work with.
I follow you on IG as well. I just learned more on scribing in 9:47 than I had in the past 10 years. Thank you.
I would really encourage you to check out the razor scribe. It does everything these two tools do in a more easy and efficient way. The scribe relates to the wall closer than the long body of the scribe you are using. It has one version with a beautiful little razor point and one with an excellent pen point. It is also magnetic and can be used as a stud finder.
Great video! Keep these tips comin
Nice job man. Never thought of using blocks and a knife.
When I built my bookcase about 10 years ago I did not know about these techniques - but I'm good with a Caulk Gun :-) I'm not a professional - just a DIY home owner. The next time, I'll have more knowledge - thanks to your video, or perhaps I should find a pro like you to get the job done right. Well done video.
should have shown yourself making those scribes happen!! great video man, thanks.
Could you make a video showing how you calibrate your dw780? Also, have you ever had issues with the table not being coplanar? I hope to see more videos soon. I love your ig too. Very informative.
the trend easy scribe was actually designed and made here in Newry, N. Ireland by a carpenter, it was on sale for about a year here locally before Trend must have bought him out.
i have put a slight concave bend on mine (the bottom piece that slides) so that its in contact right at the scribe line
I would love to see the details of that build! Also, could you speak about getting accurate measurements? It seems to be my biggest issue as a newbie DIY-er.
Question! With the diamond back belt system, did you go with the finish carpenter setup? Love the hammer loop and the hammer sleeve. Also would you like to see that I. An XL version? Why only give frames the XL pockets?
Noob question. What do you cut the scribe with? Circ saw? Jig saw? Thank you for the tutorial.
Never tried that scribe tool, I use old fashioned compass. Seems like it didn't mar the walls at all. When you scribe against stone or brick are you still using those scribes? Thanks
Hi, would it not make more sense to scribe the short leg and cut to the line, than do the longer one?
So let me ask you this. With the laundry pedestal you built . How much bigger do you make the pedestal from the framing to accommodate for the Scribe.
Brilliant
How much larger than the finished piece are you building these to give yourself room to scribe?
How do you decide when to use the Hock Knife vs the easy scribe?
What you use to cut it ? Jigsaw?
Thanks for the quality work
Thank you
Perfection
Hi, nice video. Could you use the Trend scribe for both? Also in relation to the top- if you scribe both the end and along the back wouldn’t that give you a false reading? Should you not scribe and cut say the end first and fit that to the wall and then scribe the back wall?
Yep. You need to scribe the end that doesn't move laterally first. Unless of course it's square which in this case it probably was.
nice work all theway from new zealand!
You can always use bits of masking tape for the blocks to stay put, right?
Good video. Very informative. I read your reply on the tools you used for cutting to the scribe line but would of liked to watch it on video as well... 😊
Where are you getting your poplar crown molding from? I must be shopping the wrong places. I haven’t seen anything like that where I am.
Also does the Hock knife and Trend Easy scribe links go through your affiliate link so you get credit for it?
Ron
Yes. Links are affiliate links. I appreciate you asking.
Poplar is very plentiful in my location. So it’s very available.
ooh - nice tip on the tape. You could tape or double sided tape you set off blocks in place first?
The Easy Scribe lead wears down pretty quickly. Seems awkward to advance the lead. Any tip on how to advance the lead easily?
When you have to scribe both ends of the unit flush to walls . Do you do the same on both sides or a different process all together .
The fastest and most accurate way for me to scribe between two walls is to use the collins tread gauges. I use the tread jig to get the template and then transfer it to the workpiece with a utility knife.
Anyone else thinks he sounds like Jeff Daniels? :-0 Great video by a very skilled guy, thanks for sharing!
Great video, thanks for taking the time to share your knowledge. I follow your IG account too and really enjoy the content you put out. Maybe a basic question, but what are you using to cut these scribe lines? Jig saw to get it close and then belt sander to sneak up on the line? Something else?
On the plywood I got close with a track saw set at 15 degree bevel. Then I get close with the Festool Ras sander. On the stiles I got close with a jigsaw and finished up with a small block plane (nielson 102)
Thanks!
Why do you go for a 15 deg bev vs a 5 deg, compared to your stair risers ?
Would you be able to use the hock knife to scribe on laminated countertops? or would you reccommend the easy scribe instead?
It would work with tape i think. But it would probably dull it pretty quickly.
Would have like to have seen how you cut clean to the scribe line.
look at previous comments in regards to this. He answers it.
I like to cut backwards with a skill saw as close as possible and will a steep bevel then finish with a belt sander. Zero gaps. Can also use a jig saw then finish with a belt sander.
Your scribing method seems pretty good although I always just set my piece where it needs to be and use a small block of the proper thickness in relation to the widest gap along with a pencil gives me a perfect scribe with no extra tools to haul around.
With the easy scribe you don't have to go hunting for a wood block every time you want to scribe something. That's a huge waste of time. With the amount of scribing I do, it makes sense to carry with me.
use the painters tape to tape your spacer blocks to the unit.
Making it looks more difficult then it is, lol every one feels that way about their work. 1 I never seen I’d done this way and I will adopt this method. 2) no wall, is 100% accurate, coming from a framer, I know and understand. Can be more on the mudder for having shit wood in the walls.
Just wondered what you use to cut your wood after you scribe, Nice video, Thanks
A lot of different tool combos. Could be table saw. Jigsaw or Circ Saw followed up by block plane. RAS sander. Track Saw. Depends on the situation and what I have out.
@@InsiderCarpentry Thanks for the info, I use a belt sander, rasp, Jigsaw, Block plane
Good work dude! Are you using a power planer to get your scribes so tight?
He replied to the same question elsewhere, said that on the plywood he used a tracksaw set at a 15degree angle to get close, and a sander to finish. On the other he used a jigsaw to get close, and a hand plane to finish.
Loop Your tape on itself and slap it on the back of your ledger blocks my dude. No slipping. Great work.
Top video bro new subscriber for you
How do you actually do the cutting?
A laundry pedestal? Is that for washing machines, etc.? As I'm often told Americans use top-loaders, raising them up would seem counterproductive.
Why use the spacer blocks? Could you not use them , instead run the knife across the wall to scribe ?
Spencer, youll make all your pieces oversize intentionally ? iff i get you, the laundry pedestal looks like it would have been about 1/2 inch larger on the scribe runs, off setting that with the 3/4 inch blocks means you wont run off the edge with the knife
Does anyone know what the black U objects are 6:48? Looks like they are keeping the cover strips in place while scribing? Be keen to check those out if so!
I can't remember what they're called. The legs are angled so that as you tap them in they pull the two pieces together.
But check out the U-Scribe Jig for holding your scribe piece in place while you mark. Works a treat.
Pinch Dogs
How do you like the diamond back tool pouches and do they justify the price
I like them. Stay tuned. I plan to do a video with a review for youtube in the near future.
Insider Carpentry maybe you could do an overview of what you keep in there and total weight when full
great video what tool did you use to make the cuts
Nicely Done 🔨🔨🔨
Measure twice mark once cut once, and use the tape to hold the blocks in place instead of faffing about, but nice finished job.
We like to think there is 3. 😉
Spencer Wrap some tape on the blocks, they will stay in position 😄
Nice work, but I don't get why 3/4 or 1/2 new to woodworking please tell me more.
Could use tape to attach blocks so they don't fall.
Tape up the blocks 😁
I've never seen such a loaded toolbelt. That thing is FULL
I recently switched to an occidental leather finisher. Its a lot better for trimming. I'll have a video review of the belts in comparision up soon.
you're boss makes you scribe the stiles? it's gonna get caulked, no? Do you work alone? Do you have a boss that gets you your work? Thanks.
Professionals don't use caulk. That's for DIY'ers
@@AndyMcGeever bullshit lol
👍
I just got the easy scribe. Seems like a solid tool so far but that little lead holder is straight trash. For 40$ you would think they could have came up with a better idea than that. I kept dropping all those tiny little pieces trying to put the lead in it and almost lost one piece. Definitely not for old people like me with arthritis and bad eyesight lol. Even getting to the lead to feed it out is a huge pain. Had to find a screw that could get back in there to pull it forward. Don't know if I'm just doing it wrong since there's no instructions anywhere for it.
nice video :), ps that bag attached to your waist, if you fill it anymore you will fall over! hehe
Good video , why not tape blocks on to unit instead of struggling with them falling off .
at 8:30 insert "thats what she said"
Shouldn't wear a tool belt while fitting cabinetry incase you accidentally knock your work and damage it,but yeah packer and a pencil is best
Wouldn't the professional way be to float the wall instead of cut a perfectly Square countertop
When cutting large items? Track saw? Jig saw? Jig saw on a track? Table saw? Lol Osculating tool?
Kurt Guelker tracksaw set at an angle (maybe 30 degrees) while moving the track on the curved scribe line as you cut (leaving the line).then clean it up with a rail block plane (replaceable blades. For some reason not every trim carpenter has one).
tape the blocks to the unit next time
You have tape.
@3:12 If only you had some tape...
Two words double sided tape
Could just use ur finger instead of carrying all that junk looking like a dang ghostbuster.
Nothing trend make is any good, and these are 2 more tools i don't need.
Thank you