Kenmore Washer Repair - How to replace the Bellow - Gray
Vložit
- čas přidán 27. 07. 2024
- Need help replacing the Bellow (Part #W10111435 ) in your Kenmore Washer? Watch this how to video with simple, step-by-step instructions for a successful DIY repair.
Stay safe during your repair! Be sure to check www.fix.com/safety/ for proper safety procedures before you begin. Use of this video is at your own risk, without liability to Fix.com.
Fix Part Number: FIX2351984
OEM Part Number: W10111435
Why you might need to replace the Bellow:
Leaking water
What tools you need for this repair:
#20 Torx bit
1/4 inch nut driver
Flat-blade screwdriver
Phillips screwdriver
The information in this video is specific to Kenmore, Whirlpool, and Maytag. To find a Bellow specific to your model, visit www.fix.com
Not what you’re looking for? For more washing machine repair help click here: www.fix.com/parts/appliance/w...
Where you can buy this part:
www.fix.com/parts/washer/kenm...
Connect With Us!
/ fixdotcom
/ fixdotcom
plus.google.com/+fixdotcom
/ fix.com
Visit our blog: www.fix.com/blog/
Don’t forget to comment below and subscribe to our channel! - Jak na to + styl
Thank you for the video My wife and my pocketbook is screaming with happiness!
Thank you for what should be the 'model' for all DIY repair videos. Thank you for sharing. Now to find the replacement bellow!
Outstanding video. Worked great
Perfect tutorial!!! But OMFG!! that wire strap with the spring!! I just got angry enough to stretch it by hand! I miss top loads!!! Thank you though! Made this video perfectly!
I started to have the same problem with both clamps, a couple of drops of dish soap around the gasket let the wire slide easily.
Thank you! The instruction was easy to follow, and I was able to replace a leaking boot seal. First try at this type of repair!
Worked like a charm for my son and I. Thank you so much
Really well done. Thanks.
Thank you for the excellent video. All working!!
New sub here… what a great video bro!☮✌🏻
Very helpful.
Great video!!
Perfect, Thank you!
Thank you, this made the job a snap.
Thank you! 🙏
This is a great video! I didn’t remove the bellows all the way because I thought my problem was elsewhere, just needed access to the front inside the cabinet.
However, I’m still getting a leak inside the cabinet below the drum and am unable to diagnose the issue. Could an issue with the bellows cause an *internal* leak? I thought if the bellows were damaged it would only leak out the front of the door - which is not my problem. Thanks
Very Helpful. Was able to complete the repair with minimal difficulty. Would have really appreciated a close up pan across the opening once the repair was completed - just to verify I had everything where it was supposed to be.
Thank q i just took out door seal n cleaned wit clorox to get rid of mold n worked good.
What is the odor tub
Great step-by-step instructions! One issue I'm having with the updated part # W10111435 is that the rubber bellows does not seat over the chrome basket lip - it falls short and there is a 1/4" gap between the rubber boot and the chrome basket lip. Is that normal and will that lead to leaking?
I have the same issue and it leaks more than the dried up rubber it is replacing... Watched multiple videos many times and I cannot seem to find a problem how I installed it...