The drone footage on this one has to be my favorite yet. With the area you're in, it really takes a guy back in time cruising down gravel roads. Loving the content!
nice panel. I'm bringing back to life my 53 GMC panel have had for 50 years. Just a few upgrdes to make it a daily driver and a new coat of paint. Can't wait to drive it again. I'll send you a pic when I'm done.
My chocolate lab used to ride like that with me from the day I adopted him his butt was on the edge of the back seat and his chin on my shoulder digging the ride!
Brent, have you ever thought of putting large side windows in a van like this? Watching you work and what you come up with is always interesting to watch. Thank you for showing what you do.
Pablo looked like you built that for him, wow dad this is great diamond tuffed, hardwood floor we can put my bed in the corner, this was the best ride any dog could ever have!
Started watching just before THE GENERAL. Love the "This is all we have to do,No biggie, we can make that,and yeh" way you get er done. Never miss a video of yours!
I can relate. My dog is a lot like pablo.. Loves to ride more than anything. We travel the same roads much of the time.. So, she knows where every dog lives. Goes crazy. Does not matter if the other dogs are around or not. I wish my memory was as good as hers.
Your Shop Floor must have been Hella thirsty and those Motors, Transmissions and I think a Radiator even added to quenching it's thirst lol wish I could have seen some of pulling the old Engine and Transmission as well as stabbing the new ones can't ever get enough of it especially when you can't do it your self any more
Hi Brent ,, great Chevy panel,,,,good video music yeah,,, " John Fogaty,,,, Shine a light on me" Country Music ,,,, and great slide guitar playin ,,,, love it ,,,,, pabby he love cruising,,,,, great pal he is ,,,,Ed
I like the front of a truck ornament that you have on that garage you pulled the motor out of. Nice. Funny how cutting down a drive shift for you was no big deal but other mortals like me would have to find a shop to do that for us and it would be a big deal. Your a nice friend to have.
a feller can do it with little tools really, shortening is the easy way to do it though haha. czcams.com/video/2LojlMVTMMo/video.html how I can do it when you don't have a lathe.
Pullin da motors, da man with a couple a floaters. 47 coupe's motor runz, 49 panel's is dunz, panel's enclosed for da buddy's winter funz, Pablo n da real manz gonna do open car next winter freez'n dey bunz. Test'n da new motor in da panel, couple a real buddies too hot for flannel.
Brent, you are a cool dude. Love your spirit and great attitude. The content is always good and I always learn something. Looking forward to many many more videos!
Love the shape of that panel van.👍 Apart from entertainment, I watch CZcams to learn, and to see new, different stuff. Two things in this one that I've never seen before: a 𝑚𝑜𝑡𝑜𝑟𝑖𝑧𝑒𝑑 engine hoist and using the front tyre as a seat while facing 𝑖𝑛𝑤𝑎𝑟𝑑𝑠. Both are probably perfectly common but, when you see something for the first time, it can look like pure genius. 😂 Just curious, how old is Pablo? He's such a cool, well-mannered hound - star of the show.👍 Cheers for now, Dougie.
G'day mate man I love that 38 pontiac coupe in the back ground done such a cool chop on that car it's my favorite just ahead of the General I hope you drive it a bit havnt seen it for a while but man it's soooo cool great channel brent 👍👍🇦🇺🇦🇺
Well, another project well done, and a panel truck at that, I love panel trucks for some reason. Especially when they are faded lettered out and have old patina, they just look cooler than all get out. Anyways another great video you made look easy.
The drone footage on this one has to be my favorite yet. With the area you're in, it really takes a guy back in time cruising down gravel roads. Loving the content!
A feller is lucky to have a friend like you Brent, Love all your content keep em coming Bro! ✌🏻😊🇺🇸🇨🇦
man you can just see how much that dog loves you AGAIN I SAY YOU ARE A MASTER FABRICATOR I LOVE WATCHING YOU REMAKE THESE OLD CARS AND TRUCKS
Old junk, shop time, Freinds, good music, cool rides and a good ol'dog!
What more a Feller can ask for?
You are living the dream Brent!
J.F.🇨🇦
For sure, and don't forget entertaining us.
Good swap, icing was Pablo and you goin for a boot. Did my heart good.
Just as I’m thinking how bad ass that would look cruising in black and white, there it is!
Nice ride👍🏼👍🏼
👍🏻seems like you never run out of projects around there!
nice panel. I'm bringing back to life my 53 GMC panel have had for 50 years. Just a few upgrdes to make it a daily driver and a new coat of paint. Can't wait to drive it again. I'll send you a pic when I'm done.
I truly enjoy and look forward to your shows. Love how Pablo enjoys his time and rides with you!
Love the old panel and always the drone work when you go cruising.
Don't get any better, man , his dog, and ole panel wagon . great video as always
There's something about your show I find very soothing
Pablo sure likes his drives. Another great video guys, the only thing is that you make it look easy.
Pretty fancy dog run for Pablo in the back of that panel
That's a sweet sounding little engine! 😁 It's fitting because that's a sweet little panel!
Brent watching you has helped keep me going, here in lockdown Melbourne.
My chocolate lab used to ride like that with me from the day I adopted him his butt was on the edge of the back seat and his chin on my shoulder digging the ride!
It's nice having a coworker, especially if he knows what to do. The background music is very easy on the ears. Good choices!
Yeah, all the relics in the Bone Yard!!
And good 🎶🎩🎶 too....👍🇺🇸👍
Brent, have you ever thought of putting large side windows in a van like this? Watching you work and what you come up with is always interesting to watch. Thank you for showing what you do.
Thanks for Sharing... Paco is Having Fun!
Sweet, sweet piece. Nothing better than wrenching with and for your friends.
Great video love that old panel wagon! See you on the next one!!!
Just 3 bro"s getting there hot rod up and running! Good times oh yah
Pablo looked like you built that for him, wow dad this is great diamond tuffed, hardwood floor we can put my bed in the corner, this was the best ride any dog could ever have!
Brent, thanks for the videos of you and Pablo crusin'. Reminds me of my passed Boxer crusin' , thanks for the memories.
There are so many cool rides on your property.
I love Pablo he's cool.
And I love the patina ol the ol panel
Started watching just before THE GENERAL. Love the "This is all we have to do,No biggie, we can make that,and yeh" way you get er done. Never miss a video of yours!
I really like your videos with your bud riding shotgun what could be more perfects ! Thanks
Keep em coming. You should have many more subs because, you just damn deserve it! Everyone subscribe for this guy! I'm out. Knoxville TN
You sir are the nicest friend a guy could have and the tools to boot
I can relate.
My dog is a lot like pablo.. Loves to ride more than anything.
We travel the same roads much of the time..
So, she knows where every dog lives.
Goes crazy.
Does not matter if the other dogs are around or not.
I wish my memory was as good as hers.
Awesome dog. Sweet panel truck, great music.
Your Shop Floor must have been Hella thirsty and those Motors, Transmissions and I think a Radiator even added to quenching it's thirst lol wish I could have seen some of pulling the old Engine and Transmission as well as stabbing the new ones can't ever get enough of it especially when you can't do it your self any more
Love your laxed attitude when stuff goes sideways,cool as a cucumber,keep on rolling out the vids,can't wait for the next one,
Love that panel..."Gap Tooth Garage". Super nice truck!
What a friend you have in Röhlley, you burn yourself and he giggles like Scooby dooh 🤪
Love the pneumatic engine lift!!!
Hi Brent ,, great Chevy panel,,,,good video
music yeah,,, " John Fogaty,,,, Shine a light on me"
Country Music ,,,, and great slide guitar playin ,,,,
love it ,,,,,
pabby he love cruising,,,,, great pal he is ,,,,Ed
Great video Brent, your old car buddies are sure blessed to have a friend like you! Best to you and yours!! 👍
haha it works both ways a lot of the time
Verrry slick panel truck!
A Boy and his dog. It warms the heart!
Wow that thing is SWEET! Perfect stance, the visor, the rims, the patina, interior!
Cool old panel .Enjoy the time with your pup and i see you do here today gone tomorrow ,Corn and alfalfa looking good love your farm ,peace buddy.
Wonderful accomplishment man that is a beautiful panel can't wait to see yours done anyway great video man good one 🇺🇸🇺🇸🔥🔥🔥🔥
That 47 Chevy could be a candidate for your 53 Olds 303 V8. Looks like the old Chev neeeds lots of TLC😅😀!
Love the music at the end... The 49 panel is cool. Yep I am that old....cool.
Awesome how your builds( my opinion) turn out how they are supposed to look like😎👍
A video I can grab a guitar and play along with, perfect! The wrenchin" ain"t bad either!
I like the front of a truck ornament that you have on that garage you pulled the motor out of. Nice. Funny how cutting down a drive shift for you was no big deal but other mortals like me would have to find a shop to do that for us and it would be a big deal. Your a nice friend to have.
a feller can do it with little tools really, shortening is the easy way to do it though haha.
czcams.com/video/2LojlMVTMMo/video.html how I can do it when you don't have a lathe.
My Dad woulda loved the panel he always wanted one❤️
That was pretty good taking the one out putting it in the other and you got to have your fearless companion with you. 👍👍😀🐕
Pablo gets this video an extra like. Cool stuff man. 👍🏻👍🏻👍🏻
Great video. Nice job on the swap. You make it look so easy. Time to get your panel worked on and back on the road. Be safe and stay well.
Sweet as Always Brent ! Take Care , thanks for sharing your videos, time well spent !!
Life is good. Pablo! Life is Good!
What a great change of pace! Nice to have some friends to help, makes for a good time. Super panel truck for sure! Thanks for sending it to us.
nice ride thanks for saveing the 49 panel truck so we can see it
Pullin da motors, da man with a couple a floaters. 47 coupe's motor runz, 49 panel's is dunz, panel's enclosed for da buddy's winter funz, Pablo n da real manz gonna do open car next winter freez'n dey bunz. Test'n da new motor in da panel, couple a real buddies too hot for flannel.
That Truck Rocks
Cool panel! Nice video production!!
As you boys over there say "GOLDEN"
Brent, you are a cool dude. Love your spirit and great attitude. The content is always good and I always learn something. Looking forward to many many more videos!
It's great snooping around at allhe other Iron relics ,
Great end music, all well with the world. Thank you 😊
Love the shape of that panel van.👍
Apart from entertainment, I watch CZcams to learn, and to see new, different stuff. Two things in this one that I've never seen before: a 𝑚𝑜𝑡𝑜𝑟𝑖𝑧𝑒𝑑 engine hoist and using the front tyre as a seat while facing 𝑖𝑛𝑤𝑎𝑟𝑑𝑠. Both are probably perfectly common but, when you see something for the first time, it can look like pure genius. 😂
Just curious, how old is Pablo? He's such a cool, well-mannered hound - star of the show.👍
Cheers for now,
Dougie.
Man those are really cool. Wish I could find a reasonably priced one to save. Nice work.
Badass - soundtrack was awesome! Nice work
G'day mate man I love that 38 pontiac coupe in the back ground done such a cool chop on that car it's my favorite just ahead of the General I hope you drive it a bit havnt seen it for a while but man it's soooo cool great channel brent 👍👍🇦🇺🇦🇺
Wow I love this truck looks great with whitewall tyres
Nice service Van/Truck.
Awesome video. Love those old trucks. Thanks
Love that truck. The drone camera is so good it almost makes it look CG! Thanks again for all your terrific content. Great stuff in every way. 😊👍👍
I wish I was half as talented as you
Well, another project well done, and a panel truck at that, I love panel trucks for some reason. Especially when they are faded lettered out and have old patina, they just look cooler than all get out. Anyways another great video you made look easy.
Cool car and greate slide guitar at the end!👍
Heck yeah pablo gets to go for a ride
Another great video Brent much love from Australia mate
Perfect music for this video!
Music is as good as the video, you are a very talented fabricator.
I love the panel trucks, but not as much as the general my all time favorite vehicle you've built.thanks for the content john from arizona
Another great video my friend. Love the panel trucks ! Also good music 🎶 thanks
Great looking truck...love the drone coverage....the old dog looks pretty comfortable
Great video. Of course if it were me, I would scrap the truck and work on the Chevy coupe.
that dog love you man big smile
I’m diggin it 👍
Great you guys keep these older truck an cars going an with better power to just ride with..
I'd LOVE to have one of those to drive! A Ford most especially! :)
If a guy ever gets to feeling lazy . I’d love to see a shop tour as well as a tour of your other garages.
Very awesome!!!!
Love them ole pannals
Excellent video Brent :) also teamwork goes super well and fast doing projects also super too!
Man id love to have that. Always did like those trucks 😁😁
Hey good times with the guy’s looks like so Kool Maan !!
Another awesome video Brent. Pablo enjoyed the hell out of the test drive too.
now THAT van would make an interesting "boogie" van. you'd
have to do it in 50s flavor though :)
Nice ride. Yes I wish it were me behind the wheel. Keep on truckin' Give Pablo a pat on the head for me - Good Dog 👍😎🕵🏾♂️🍺🎸🎵👽🧙🏼♂️😈🥂
Great video glad you posted keep them coming thanks
Hot Rod Teamwork here people. 😎👍🇨🇦
Love the drone footage too at the end Brent- good times video!