I Found the BEST Tempered glass screen protector for Galaxy S23 Ultra - Milomdoi
Vložit
- čas přidán 22. 02. 2023
- 🚨This is the best tempered glass screen protector for curved screens I've ever tested that does not use liquid adhesive. This is my screen protector to beat going forward!
Buy on Amazon
Milomdoi Tempered glass screen protector - amzn.to/3IEatxC
Thanks for watching!
Follow me on
Instagram - / hightechcheck
Twitter - / hightechcheck2
Facebook - / highttechcheck
Subscribe - / hightechcheck
@SamsungUS @Samsung #galaxys23ultra #galaxys23series #galaxys23 #galaxys23plus #samsunggalaxys23ultra #samsunggalaxys23 #bestandworst - Věda a technologie
I wish Samsung would ditch even the subtle curve on screens. But at least we now have screen protectors that work. I remember the hell i had with my Note 8
Well I love the edge screen and I hope they keep the edge for ever inshallah alhamdulilallah
I agree. Most annoying thing about most flagship phones
What do you like about it?
They will now
that's why i got and love the bay pixel pro 8! it's the first high end phone with a flat screen since the samsung galaxy note 5.
Hi there, question if i could - What do you consider the *Toughest* protector and case combo? Ive had my S23U less than a month, and despite a case and a glue on protector it now has two seperate nasty cracks in it from drops onto gravel. I used to run Otter Defender cases, but what they offer for the S23U isnt anywhere close to what it used to be. Any thoughts? Thanx!
PSA for people with the official galaxy s23 ultra leather case, no issues on my end with the protector lifting or causing corner bubbles. No issues here and it's a good fit.
PSA for anyone with tight fitting cases. As some have mentioned, this screen protector might be a hit or miss with certain phone cases. Unfortunately, it didn't work out for me with my Mous (brand) phone case as the case is very tight fitting and would wrap around near the edge of the screen. For this particular reason, I kept experiencing issues with micro-bubbles, corner lifting, and edge lifting due to the tight fitting case pushing up the glass. This became an huge annoyance and made it difficult to type or detect buttons along the lifted edge. I've been using it for a few weeks (since release of S23 Ultra) and the edge lifting seems to have gotten worst as the adhesive has lost it's tackiness. Fingerprint sensor was a bit problematic for me as well even with the touch sensitivity setting turned ON. Don't get me wrong, the tempered glass is definitely amazing (feeling) but wish it would had worked out for my situation. Definitely hoping for some better solutions (if any).
Side note: For installation, follow the exact steps mentioned in the video for installation! If you don't apply pressure down the middle first, then you'll end up trapping air pockets in middle of the screen.Do it correctly the first time and it might save you some headaches! haha 😂
Which Mous case do you have? I have the clarity 2.0. I was going to purchase this screen protector.
Could just use the cases in this video? I’ve got an official Samsung leather case, caudabe sheath and a dbrand grip on order and will get the official Samsung case in this video and this screen protector and do some testing
Yes mine went smooth too but it won't register my prints at all.
the "solution" is samsung needs to stop with these absolutely USELESS curved screens. i have the phantom black 512GB s23 ultra but haven't used it since i got the FINALLY flat screen bay pixel pro 8.
@Yame39 what did you get instead I done the same thing
Can you tell me about the black border.. is that black border blocking the screen.. i cant go for uv tempered because will spread into spen or front speaker.. so i want full glue tempered with fingerpint support also.. i only find this model.. i tried lito 3d.. but fingerprint is not working correctly.. also its black boder blocking screen little.. so pls tell me is this blocking the curved screen or top
I was quite hyped about this screen protector and jumped few hoops to get one. Then once it was installed, I'm not impressed that much. The black bezels cover part of the screen sides. Fingerprint does work but you need to press quite hard. Overall touch feel on the screen is also altered because the protector slightly thickens from the middle to the sides which reduces sensitivity a bit in the thicker parts. Not to mention the sharp edge of the screen protector is well above the actuall phone which creates a gap - it'll catch all the gunk from your fingers, dust, etc.
I'm curious for how long I'll have the nerves to use this and then modestly return to a cheaper hydrofilm based protector.
Great, one day after the installation and quite obvious flaw emerged. The glass edges which are on both sides freely in the air are fragile as hell. I don't know I bumped my phone with but I just found out that the protector is chipped (the whole day was in my hand or on a table...).
2 thumbs up! Had 2 new phones to protect so I bought 2 boxes. The first one was perfect. I just followed your directions. I cracked the next one while trying to remove air bubbles. I got a little lazy and tried to catch 2 bubbles that were too far apart. The 3rd was a charm. We ordered several different cases to try. Neither of us want to use the camera protectors since we've heard too many stories about foggy lenses, etc. We live in the humidity capital of the US. So camera protection in the case is important. Just a small lip would be fine. This screen protector went on just fine with both the ES Boost Kickstand case and the UAG Plasma. No lifting that I can tell. I wish the UAG case had a bigger lip of the front screen so I might keep looking for a different case. I have always used the Speck Presidio Grip case but there is no camera bumper this time. Disappointing. I drop my phone at least a couple of times a month. Never had any damage using the Speck case. If camera protection is not a deal breaker, I highly recommend. I'm going to be returning mine. Since I still have it, I tested and the Speck Presidio Grip case worked fine with this protector. BUT - the Speck Presidio Perfect Clear was a nightmare to get the phone out of. Once I put the screen protector on, there was no way I was going to try to put the phone back in that case. UPDATE. I just tried the ESR Shock Armour Kickstand and I think I've found my winner. Not problem with this screen protector AND it gives me the front lip around the case and camera protection on the back. And a kickstand. So the 2 case winners are that one and the ESR Boost Kickstand. Pretty much everything was reviewed by your awesome channel, except Speck. Used your links to help support your wonderful work! Hope this info helps someone.
hi, does the finger print id works under the sunlight? I have another branded tempered glass screen protector and figer print id works indoors. Just doesn't work outdoors.
Also, the screen protector I have has the cutout for finger print, a circle area with a more transparent film near the finger print area. I know this one doesn't have that.
Not compatible with the Supcase Unicorn Beetle for anyone with this case. Top frame kept lifting the glass creating air bubbles. Great installation video though. I used this instead of the instructions it came with.
The black borders also cut off the visible part of the screen reducing the screen size of what you see. So it is going to hide some of that screen. Personally its got too many cons to be worth it to me.
no bro, its outside of the bezel. i'm using S23 Ultra Protector
@@ilm-youtubestories I've used it I know for a fact it covers the screen lol
@@ilm-youtubestories which case you are using
Could you make a video of what cases are compatible with this screen protector? i bought the ringke fusion x as you recomended on other video and it lift the edges when is on my pocket.
Question, will this fit the Torras s23 ultra case? I'm looking to change from a polymer screen protector to a tempered glass one.
Any chance at a video of trying this with different "rugged" cases that are not too bulky. Or anyone know of any that works well with this?
Bit of a PSA for you all: if you have a case that grips tightly around your phone edges, like the Spigen Tough Armor as I do, then it will lift this Milomdoi scree protector up. I tried applying it twice and screwed up with not applying force causing bubbles, but I noticed that the edges were being lifted up.
Dang, thanks for the info! I'm getting the Spigen Ultra Hybrid S clear case. So, I guess I'll have to look for another screen protector. I'm curious to know about the screen protector covering the selfie camera with no cut out. Do you see a drop in quality when taking pictures or video?
@@micahjohnson9184 I had the Mowei UV protector on the S22 Ultra, also no cutout, and I have to say I didn't see any difference, no weird glaring or haze or anything. I'm sure this is fine as well :)
This could all have been avoided if Samsung hadn't made this screen curved... the curve is so minimal right now that I'm even thinking what's the point, just make it flat already.
@@Garrett1974 Thank you! 🙏🏾
@@micahjohnson9184 I didn't get to test it with my camera, as I was putting it on before I ever set my phone and got access to the camera. I feel like it would slightly drop in picture, but I'm not entirely sure.
Thank you for you instructions and scratch tests
This screen protector is probably the best full adhesive screen protector that you can get for the S23 Ultra that does not require mathematical engineering degree to put the liquid adhesive screen protectors on. Yes it does cut part of the visible screen due to the black borders around the screen protector but it's minimal. A lot of cases that wrap around the screen itself will lift the screen protector especially in the corners I will recommend rhinoshield case it goes up right to the screen protector without touching it only bad part it's a little expensive for a case.
You say it's expensive, but you haven't bought Casetify
rhinoshield crash guard?? i bought one for my note 8 a few years ago but was too scared to use it lol
Does this film protect impact as well as the uv glue screens?
Just what I need. Thank you.
It worked for me. Thank you so much. Subbed!
@HighTechCheck was is the case that you are using in this video. Looking for a case and screen protector combo
Can we use this glass screen protector with subcase pro, otterbox pro or i blason
Thanks for the video what is the name of clear case you have in this video
The adhesive glue glue went in the s-pen slot how long will it take for me to get it out like whats the adhesive expiry ?
Would appreciate the help 🙏🏼
I've had something similar for the Oneplus 7 Pro, full adhesive, and you had to lift up the corners one by one to squeegee out the bubbles, but once it was done it was fully adhered, also on the curved edges yes. Hope this version is somewhat case friendly... I believe the black edges are there so you can lift it up without seeing it (could be a little bubble/dust particle under there if you lift it)
It’s going to be a tight fit for the most part and unfortunately the only way to know how it fits with your particular case is to try it.
No good breaks way to easy trust me they suck
Will there not being a hole cut out for the front camera effect front camera pictures ? I read that it will if you use flash it will cause the picture to be blurry is this true
I have been looking for a screen protector for nearly a week they all seem to have very complicated installations thanks for the video.
thank you. i just switched back from an iphone to this and was having a hard time finding a screen glass with full adhesive since it's so common for iphone protectors.
Does it have a noticable hole for the fingerprint? Wasted 25 bucks on a protector with this annoying circle
Plz give the link of the same transparent case that you showed in this video?
What would be the finger print accuracy rate would you say
I've the uv one from imbzbk and love the accuracy of it....only grip is it's hard to install and I've 2 tiny bubbles that no one would noticed but me 🤣and it's really bothering me
Fingerprint doesn't work worth a donkey crap... Stay away, even with struggling to register two finger prints, and increasing screen sensitivity.
Could have been a decent enough screen if it actually worked.
I was pretty excited after installing this - took a little extra time to pry the corners and get the bubbles out, and when I was done it seemed nearly perfect. Then, alas, I could not get the phone into my Spigen case without the corners of the screen protector peeling up. I tried over and over, stretching and prying the case, but finally admitted defeat while watching the bubbles' inexorable spread across my screen. I removed the Milomdoi; corner protection far outweighs screen protection for the moment, I figure...
Did you find a screen protector that worked with your Spigen case? I had the same thing happen to minee with the Spigen tough armour so now looking for a new screen protector
@@Flemo2140 I didn't. I ended up using an OtterBox Commuter case with a Whitestone Dome screen protector. I hope you find a good solution for your phone.
With it's 0,16mm thickness allows the fingerprint sensor work pretty well and giving a very decent protection against scratches, I love that one over the thicker ones.
How does is handle drops, cause I will not purposely drop it, but I something that takes a drop in the gym with a bouncy case like a poetic guardian with instead the frame with this protector...this glass vs tpu film...I would appreciate your recomedation...23 ultra of course...
What about the black frames of the glass protector? I heared interfear with some of the display, since you have a black background in your cellphone you may not noticed, I would love to see another review checking this and also using the front camera since the glass covers it
I also have this protector and it went on flawless! The fingerprint sensor and spen work great as well. The black edges do seem to slightly interfere with the curved part of the display blocking some of the waterfall bezel. it doesn't bother me much but this would be hands down best protector if it was completely clear. seems stronger then other UV brands with not mess. front camera seems perfect to me to interference. i did not use the back camera protectors due to how it just sat across all the lenses
@@MastiffRonin Thanks bro
Thanks! This is how every review should be done! ... Well done man!
Help. Can't find any more of these. I've been a frequent buyer of these same product for s23 ultra. I've used to buy them on Amazon. Now they are not available. And can't find something similar,. They all got that nasty hole in the middle. Do u know where to buy more or a similar product with out the finger print hole
Does anyone know if it fits for the thin fit spigen case?
Managed to install fine. Fingerprint sensor worked fine too. Got all the bubbles out too. Just kept lifting with my case - Spigen.
No front camera cut out? Wouldn't that create issue in selfie picture quality?
You mentioned the adhesive protection..
Those the plastic tpu? I am a clutz with this temper glass break with one fall?....also you can buy individual glass cam glass i thought that was what you were putting on it has a template like that they fit around the cam and stay on to protect your lenses....getting my galaxy in the mail today excited don't know what case to get I have a note note 9 with that plastic screen protector tpu....and 4 years ago I bought the clayco exeon by sup...tpu back bumper that comes with a screen protector built i just through the one extra and have loved it. One bubble wbe screens off but can't see if with the display on. Cut outs are much bigger that the more note 9 for the 23 ultra, so I am looking g for tempered glass for the lenses...poetic guardian seems like my only choice or punk case come with and extra frame without protector if you choose your own..I just wanna know if anyone can tell me if I drop my phone in the the way I have before with my current bouncy case clayco...saved me every time, same kinda for the new one...will the tempered glass break...will I be going threw sheets of tempered glass, or tpu? Open to suggestions around the board... toughest bumper plus SP I stalled....has to be able to survive a 5 foot fall if it falls out while I am doing pull ups that would be the worst it would get next to short falls out side which rarely happens...gym is my concern falling off tables...appreciate any suggestions.
I use an Encased thin armour case and it doesn't work. The bubbles keep coming back along corners and edges even after I press them out.
Also I used my thumb to push a bubble out up near the camera, and when my thumbnail went over the lip the force of just my nail going over the edge fractured the protector from the camera notch down. (I'll take the blame for this)
Amazon user reviews are only 2 stars out of 1800 reviews so not impressive in the least. (Canada)
It is the ONLY non liquid glass protector with full screen adhesive though. I'm hoping other companies make alternative options soon.
Does this case work with the OtterBox Symmetry Clear Series Case?
These are great however the edges are so brittle I've gone through 8 in 4 months.... the absolute lightest bump on the edge shatters it
using it with the ultraclear mous case seems to be working well enough. i just suck at installing these so lots of microbubbles for me
My only concern is the black edge of the screen protector taking away from the display. I know on my previous models with curved screens those black edges always block some of the screen. How much did it actually take away with this one?
After holding this in a pocket for awhile I observed it is moving. I can even move it back to left, right, down, up. It's strange, force pushing this will move this successufly. It catches scratches also, little bit disipointed. I also don't understand why version which I have front camera open space which I don't see on your video.
Hitheret
After watching this video, I also got this glass for my S23 Ultra, but since I put it, my fingerprint doesn't work, and it's impossible to set a new one even with touch sensitivity ON.
I need help
What case are you using with it? I tried with a spigen rugged armor and it lifts out on the sides. Not compatible unfortunately
Spigen Rugged Armor 👎
Onn Dual Layer Clear/Black case 👍
Speck Presidio 2 Grip👎
ESR Case with stand👍
Will this fit with a otter box defender case?
Started dropping from all sides after a few hours. Installed according to instructional video. when I was going to remove it, it broke and got several cuts on my fingertips.
Still have a piece of glass in my finger
How’s the camera on the front because the protected is covering it
So, with this screen protector what cases actually work withoutany issue ? I'm looking for minimalist look but good protection.
Simtect Camera Protector Case and Carveit Wood Walnut Case works. the carveit was way more premium then i thought it would be. Ringke and Spigen cases did not
That slight bit of resistance you say it's too much for me there's too many good ones out there a little thicker but are really good glass and have zero
as this screen protector cover the front camera, does it affect the picture quality..?
Unfortunately it does. I am still looking for other options for tempered glass for s23 ultra..
will this screen protector work with a samsung case. I got my case from the samsung store.
Is this screen protector compatible with UAG Monarch case?
Hello i applied on my S23 and now no recognize my finger, im very disapointed
any answer to try to solve
thanks
Is this compatible with casetify phone cases?
Returning mine. Followed instructions, but bubbles keep popping up and sides keep coming up. I had this brand for the phone im replacing without issue. Assume it may becthe curved scerrn
Yeah I bought this one first black border isn't that annoying to deal with but the front lense of the camera is covered in the adhesive and blurs the photos a tiny bit and the edges get slightly lifted by the phone case definitely no my favorite
does it work with my uag case?
I hope my case isn't too tight.
Anyone using uag and this milomdoi screenprotector?
Thanks for the review. She helped me buy a great product. Installation is really simple
Is there any way of getting this in europe?
Does this work with UAG Monarch pro cases?
Thank you! Just had to make a claim on BRAND NEW S23Ultra Lavender phone😭 Verizon rep sold me cover and screen protector and said I'd never have to worry buying another one...fast forward...Crack in curve which I am hearing now the curve is an issue. Ugh I've had every note and can't get away from them, cause I love my pen. I'll be ordering this cover 2nght🥰
Can you also leave the link for that clear case 🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽
I installed this screen protector. It looks perfect, no bubbles or dirt beneath it but the fingerprint sensor doesn't work at all.
Any advice?
Idk, I tried this one before White dome glass. It was horrible with FP sensor even after re-registration
Same here. I ended up ripping it off and returning it. The fingerprint scanner worked, but only 25% of the time. The times it did work, it was definitely a lot slower, and I had to press down pretty hard. I don't recommend it. I bought the one from Whitestone and I'll see if it's any better. It's pretty expensive tho.
it's not the best yeah but it's ok when you put your fingerprints multiple times
Installation was very easy, i had no bubbles on the first try. I did it like you. 4 corners press first, then the full middle section and in the last the sides nice and slow. worked perfect.
Nice!
Do you use a case? If so, which one?
@@vinnieducy947 Only fitting case i found so far is from cresee, more testing tomorrom 😅
@@vinnieducy947 After more testing i can say very many cases fits for the tempered glass protector. Only not fitting was from spigen, caseology and Ringke...
@@stefank.4746I think otter box also cause some bubbles occasionally
In my case, bought this protector and ringkee fusion matt case. Everything went downhill after putting on the case. The protector started to come off from both sides and fingerprint doesn't work anymore (even after turning touch sensitivity on) . Total loss of my money.
Which case you are using with it?
Its got a black border that covers up the corners of the screen, making them look more rounded.
My question is how well did it hold up long term after installation?
The best screen protector that I ever found was one that Samsung pre-installed on all S20 Ultra from the factory. Never had bubbles on it and still going strong to this day. I upgraded since to the S23 Ultra and the film seems to be the best.
I see that it doesnt have a cut out hole for the camera. Have you tested out the camera before and after installation, in different lighting situations?
I didn’t go that in depth for testing it
Which cases are fitting with this tempered glass ? I tryed with spigen slim fit and it lifts the edges... ☹
Samsung cases works with this screen protector. I have the Samsung leather and the silicone case and they both work. No pushing on the edges of the screen protector.
Are you going to have some Screen Protectors to test with the S24U soon? I hope we have many more options of screen protectors for the S24U and it's "nearly" flat display!
Will this work for the otterbox defender?
Does this cover the edges as well
It fits well with poetic cases. Downside, fingerprints reader is not working anymore
Why do they make the edges black ? Is it because of the adhesive?
Thank you for the video. It was great.
Good screen protector I had a couple bubbles didn't do the installation the same way unfortunately came across your video afterwords but , One thing to mention it does slow down the overall screen response, I have the screen protector setting turned on just noticing phone doesn't feel the same as before Big mention
What case is that ?
Everything is good but I'm facing issue with fingerprint scanner. Works for 10 20 mins after registration but stops working after that
I had a few bubbles left over. My method was to lift up the protector until the air traveled to the bubble. Once there I left the protector pushed up and as a squeezed the air out, I slowly lowered the screen back down. Worked well for me. Also for the fingerprint, my finger was completely dry and glided across the screen so the fingerprint would not register. I moistened my finger just enough so it felt a little tacky on the screen, then the fingerprint reader registered my prints.
😂I tried to remove that last bubble in the corner by just barely lifting the glass with the tool - crack. The second cover fit better. Thought I had it made. This time a couple of small bubbles formed but no problem. A half hour later I set my Ultra on the wireless charger and elongated bubbles formed the full length of the phone on both sides at the curve. Several larger bubbles formed at the top and bottom. I tried to squeege the bubbles to the corners on both sides and the glass cracked in two places. Nasty mess to get off. Back to the film.
Will this work with UAG cases?
Is it case friendly?
I put the protector in the bottom first then lowered it down. I pressed on the four corners and part of the protector was hanging on the guide. it cracked. The second one worked better, but there are still bubbles that I can't get out. I tried lifting the top left corner just a little and I think the corner cracked a little. Now it seems like bubbles keep forming in that same corner and won't go away. Oh well. I will live with it now.
Well...mine lasted about 4 days and now it is cracked. Have no idea how it cracked i have been really careful. The installation was great , but unfortunately it does not last long. 😢
What is the name of the glass
I have the Spigen Rugged Armor and the Privacy version of this fits perfect
I have these, after two days the curves cracked in two places. I never dropped it. I keep my phone in a cubby at work, so nothing could've happened then.
I have this protector on my otterbox defender. The corners would rise when putting phone in my pocket but go back down easily. Fingerprint senser went to crap like 30% or less responsive rate even with multiple fingerprints registerd. Worst was the awful grainy greasy effect it has on the quality of the screen especiallyon white backgrounds (which is the whole reason i choose the s23 ultra over other models) ive tried both protectors and have had same ugly effect on both. There is a black boarder slightly bigger then the edge of the screen which slightly cuts off the max area of the screen. All and all it keeps my screen safe but i do not recommend this brand at all
Fingerprint scanner doesn't read after install, even after deleting and re registering
Great screen protector. I have two issues though. The first one is the accumulation of finger prints. I'm always wiping down the phone throughout the day because of my greasy fingers. The second issue would be the fingerprint sensor. It 90% works. But that 10% does get a little frustrating. Especially after washing and drying your hands. It will not recognize your fingerprint. I have to try at least four or five times before it registers.
But everything else is great. I think I will set up my facial recognition in case this happens to me again.
A oleophobic coating will fix this
The second issue is with the phone , even I have the same without and protector
AMAZING!!! a bit more complicated than how screen protectors work on iPhones but this is still amazing that I can use a glass screen protector on my Samsung in the future when I eventually get one😂
What about later? Dust coming inside glass..?
Does it feel like a flat screen glass screen protector?