Fast Fall Detection Completed! - My First PLC Project
Vložit
- čas přidán 14. 11. 2022
- I'm getting better at PLC programming and in this video I showcase a very simple fast fall detection program that was super hard for me to do haha. Enjoy.
_____________
Hi, I'm Hamed, I just graduated in Electronics & Electrical Engineering. I'm now working as a PLC Control Engineer.
My GitHub: github.com/hadefuwa
My website: www.hamed.engineer
If you have any questions you can email me at hamed@hamed.engineer or just comment below.
Stuff You May Have Seen In My Videos
Oscilloscope £220: amzn.to/30AmFst
Elegoo Arduino Most Complete Kit £50: amzn.to/3qFHsoU
Elegoo Arduino Basic Kit £15: amzn.to/3qLipRK
Soldering Iron Station £30: amzn.to/3qHRWEm
Handheld Oscilloscope £50: amzn.to/3l76yMx
DIY Function Generator £9.99: amzn.to/30ynTEr
Lavolta Power Supply £60: amzn.to/3rHkFue
Eventek Power Supply £60: amzn.to/30DCrCO
You Can Also Find The Above For Cheaper On Banggood/Aliexpress
Could also debounce input signals in a debounce function block. Then use the debounced input memory bits throughout the program logic. Removes the confusion of debounce timers in the logic and makes debounce times easier to see and change.
Very informative video. I'm doing an EE degree and I'm interested in PLC programming but my degree doesn't really cover it :(
Thanks Joe, I wouldn't worry about not having the module, you can learn PLCs yourself on the side. I'm keen to do some videos on using a raspberry pi as a PLC but just been swamped recently
😴 ᑭᖇOᗰOᔕᗰ