-10 Dirty Diesel Cold Start *Yanmar 10hp Clone*
Vložit
- čas přidán 4. 09. 2024
- YUP!!! This was a little too cold for the poor Launtop diesel!
But had to test out my new battery setup 700CCA :)
Please Rate Comment & Subscribe
Check out my other videos. Check out my Facebook Page
/ starpuss
i want a sears so bad they look badass.
Upload More vids starpuss! No work tomorrow I usually spend my free nights watching your videos! Ahhahahahah I know you usually upload a few at a time!
I have about 4 hours of hunting vidz , but I will only upload maybe 4 15 min videos of the hunting 2014.
I started to watch a lot of what I taped and my camera SUCKS in low lights and thatz when all the good stuff was happening.
Great cold start!
Big big difference between a 10hp diesel and a 10hp gas .i had to put a 100lbs of weight on the front of my kobata 12hp to keep the wheels on the ground even in 4x4 with it in high range 4 gear it will wheel y .the weight helps..
Nice cold start man.
got to get the intake heater set up done its only getting colder
billstmaxx sent me to your channel
Who builds these engines? What do you suggest for a simple, reliable, mechanically injected diesel with no electric's (starter is all right) for use as lets say.. a extended power outage generator in a Canadian February?
billstmaxx sent me to your channel asowme
I had mine running today did a little bit plowing if you want to call it that, lol
Video tape her!
I am interested to see how much smoke yours makes on startup and how long it takes to clear up.
Buy a tripod!!! or get your gf/wife to hold it.
***** To answer your questions I do have a tripod, in my opinion it didn't smoke that bad, I did use the glow plug also I had the block heater on for a little bit before I started it.
I call starter abuse !! LOL... Just kidding man, You got it going that what counts !!
after all that the starter was not even that hot.
And I have around 6 spare starters :)
I am going to mount a 6hp on a skid and mount up a new semi truck battery to her for some REAL cold starts just for fun over the winter.
Oh man I was just joshing ya !! It take a bit to get them going some times !!
Nice yea id say thats a cranky little diesel. And theres a dash on eBay for a ss 16 for $50. Great video keep them up
Stock dash will not fit anymore with the large battery I installed lol , The battery is my new dash !
Ohh lol but i thought your ss 16 needed 1 also?
Ryan Desko
I want to get a fiberglass one for that tractor
She runs pretty good nice video
Did you get your new go-pro yet?
Cant wait to see you do some cold starts of your International Harvister 350 tractor lol.
(This video was made with my go pro.)
Not yet it is supposed to arrive on the 17th I forked out the extra and got the GoPro 4 Black.
Nice!
Will have to do a video together and test her out see how see how she works.
Dude, you need an air filter. You don't to dust the cylinder. Yes, unfiltered air alone, can ruin your engine.
Keep the key turned so it will start!
in -30 weather i just hook the starter wire to the battery and walk away for 5 min and it starts LOL!
YUP 5Min of Cranking in -30
try one of those heaters u took off the 6hp
that's what I am going to do , but I need to make adaptors to fix this engine.
cool
Dang dude you must live almost as far north as me lol.
I am from Manitoba Canada
born on Dauphin grew up in
Brandon now live in Saskatoon.
I'm impressed! One of those would work on my logsplitter.... what do you plan to use for a manifold preheater?
I am going to run a Standard Cummins 60amp manifold heater
I have LOTS of the new 6HP engines forsale cheap.
Maybe we can make some kind of trade :)
I was asking $300.00 each for the motors , they retail for over $800 online.
Compresion!!
Any deer this year ??
Hey starpuss what size is ur garage and how much did it cost to make I am looking to build one
24x28 (10ft ceilings) we are into it for about $50k right now that's with all the extras and infloor heat.
How much with no Infloor heating and the extras
bare "kits" are like 7-10k + Your concrete pad is around 5-15k depending on prep work & how deep you want it and the psi and then maybe 5-10k more if you pay someone to build it.
Maybe more if you need to get a lot of excavation done. (tree roots and stuff like that for a good base.
Where do I buy a kit I am in canada
Um.. Any building supple place should be able to give you a full quote.
billstmaxx sent me
Thank you , Hope you like my videos
Let's see minus -15° C = 5°F this doesn't make since, because 0°C is freezing, 32°F is freezing, WELL never mind, I had a brain fart man. So it is correct then = Still cold.
LOL
Just wait till -40 then ill be doing some REAL cold starts lol
***** I can't wait man ! I have a brain fart every once in a while. LOL.
do you have one of these diesels for sale?
not anymore.
StarPuss www.ToxicRedNeck.Com can ya send a link were you get them?
Peter Lombardi i got all mine local , it was a one time thing.
StarPuss www.ToxicRedNeck.Com lucky Damn