I bought one new and from day one never ran right. Sent to the dealer 4 times and each time it was the same. I took it upon myself to replace the carb and it got better but I’ve given up on the 5lb top handles. I’ll stick to my 201TC’s they never ever give me a hard time.
Foarte fain "gușterele"😁merge foarte bine dar după un MM o să meargă și mai bine cu toate că acum motorul nu se aude chinuit in lemn Multă sănătate va doresc🤝🤝👍
Sa zicem ca nu e cea mai reusita drujba a lor 😁, dar tre sa tinem cont cati CC are si ca nu e pro grade... Cu siguranta va fi mai buna dupa MM... Numai bine! 🤝🤝🤝
îmi. place și asemenea jucării dar te obosesc la o mînă dacă ai de lucru mai multă vreme. Am avut T 190 și am preferat pe lîngă curte ms 170🤣. F bine merge pișpireaua asta👍. Te salut cu sănătate Ram🙋♂️
Salutare! Foarte buna observatia, da, au un domeniu restrans de activitate... Decenta, are nevoie de imbunatatiri sa fie ce trebuie. Numai bine si spor! 🤝🤝🤝
The Lumberjack Jackyl Composed: Jesse James Dupree Ha haa I was born in the backwoods Of a two-bit nowhere town Fathered up some rock 'n' roll (baby) So you mothers could boogie down I ain't whistling dixie No I'm a rebel with a groove All around the world the ygo 'round and 'round When they dig on my new stainless steel sound oh yeah I'm said a lumberjack baby And I'm gonna cut you down to size I'm a lumberjack baby And you're the one that gets my prize And when you hear my motor running You know I surely I suerly a be coppin' a rise Oh! So I'm gonna crank it up and cut it down and check it Chainsaw solo whoo I'm a lumberjack now baby I'm a lumberjack now baby I'm a lumberjack now baby Oooh I'm a lumberjack now baby But I ain't jacked my lumber baby Since my chainsaw you Ha haa Whether you like it or whether you don't whoo That's the way we like it
глупо такой пилкой пилять бревна, 1 рез такого бревна сокращает ресурс пилы х6(себестоимость такого распила) в сравнении с пилой с движком в 60 куб. см к томуже пиляющий работать с пилой не умеет... итого износ пилы х50... купил пилу, уе_ал ее и понес в сервис пилу и зп :) зато хороший инструмент в руках подержал)))
Thanks, glad to see you're running 3/8 pitch, 0.050" chain.
All the best!
Good video, I have this saw, 12” Bar… starts easily and very lightweight, plenty of power for a smaller CC engine, useful and worth the money.
Thanks for watching and comment!
Good little saw. Cuts really decent for the size
Yes...
Thanks for watching and all the best!
Arata bine,, mititica"! Pentru uz casnic este absolut necesara! Felicitări pentru clip!
Multumesc!
Da, foarte utila pentru multe lucrari fine...
Toate cele bune si spor! 🤝🤝🤝
👍👍👍👍faina drujbita ! Sanatate numai bine !
Buna pentru anumite lucrari...
Toate cele bune!
@@poparamiro corect ! Pentru curatare crengi este perfecta.
👏 🎄 Sarbatori fericite ! ❄ ❄ ❄
Multumesc la fel!
Toate cele bune si spor!
🤝🤝🤝
Mică dar nărăvașa. Foarte bună la casa omului. Te salut Ram
Salutare!
Chiar naravasa nu e, dar are loc de imbunatatiri.
Intr adevar e o scula usoara si utila.
Toate cele bune! 🤝🤝🤝
Ragdolls make the best cats!!
😁
Thanks for watching!
Seems to have alot of power for a little guy..very nice🤙🏻🪓😎
Thanks!
Yes, cuts decent, and has room for improvements...
All the best! 🤝🤝🤝
Da,incet dar sigur se pare ca te indrepti catre un gta de la stihl 😁
Sàrbatori fericite iti doresc !!!
==)))
Adevarul e ca nu am crezut ca ajung sa cumpar ms170, dar.....
Sarbatori fericite !
I bought one new and from day one never ran right. Sent to the dealer 4 times and each time it was the same. I took it upon myself to replace the carb and it got better but I’ve given up on the 5lb top handles. I’ll stick to my 201TC’s they never ever give me a hard time.
Yes, i seen some carb problems on this one...
Thanks for watching and comment!
201tc is great tho...
Best regards!
exelent work
Thanks!
Best regards! 🤝🤝🤝
@@poparamiro 🤝
Foarte fain "gușterele"😁merge foarte bine dar după un MM o să meargă și mai bine cu toate că acum motorul nu se aude chinuit in lemn
Multă sănătate va doresc🤝🤝👍
Sa zicem ca nu e cea mai reusita drujba a lor 😁, dar tre sa tinem cont cati CC are si ca nu e pro grade...
Cu siguranta va fi mai buna dupa MM...
Numai bine! 🤝🤝🤝
îmi. place și asemenea jucării dar te obosesc la o mînă dacă ai de lucru mai multă vreme. Am avut T 190 și am preferat pe lîngă curte ms 170🤣. F bine merge pișpireaua asta👍. Te salut cu sănătate Ram🙋♂️
Salutare!
Foarte buna observatia, da, au un domeniu restrans de activitate...
Decenta, are nevoie de imbunatatiri sa fie ce trebuie.
Numai bine si spor! 🤝🤝🤝
Nice video! Nice performance. At first break in cuts, had you tuned the H or was factory settings?
Nice cats :-)
Thanks for watching and comment!
What we looking at here?... is this new or something have they changed it? As the last one was a bit down on the 2511 and heavier
The same as 150TC, i think minor engine "enhancements"....
Thanks for watching and all the best!
It needs ported an exhaust advance time. And that thing will rip way more.
How many cantimeters is the metallic part that cuts the wood? I bought this chainsaw with 30cm chain. It's interesting...
35cm i think
Best regards!
Merită să ai una acasă
Este ce trebuie prin grădină și mai ales când te sui prin copaci
Un clip foarte fain te salut Ram
Foarte bine spus!
Salutare si toate cele bune!
🤝🤝🤝
👌👌👌👌
🤝🤝🤝
👍👍👍👍👍👑👑
🤝🤝🤝
😍
🤝🤝🤝
i had to change the piston and cylinder on one of those. they are a bloody nightmare to take apart and reassemble.
I can not say that i'm impressed by this chainsaw...
Thanks for watching and all the best!
🤝🤝🤝
Merge super, chiar dacă e micuță..
Da, pentru ce a fost facuta e decenta in forma stoc, nu multumitoare totusi...
Numai bine si spor! 🤝🤝🤝
Faina si asta mica. cate pisici ai?
Buna de lucru usor...
3 gustere 🤣
Numai bine!
Eugen are mai multi mamuți😁😁
Thinking about picking up a ms151tc at my local ace has one for 479 brand new 🤔. Kinda Thinking it's too good to be true
I have carburetor issues...
Thanks for watching and best regards!
The Lumberjack
Jackyl
Composed: Jesse James Dupree
Ha haa
I was born in the backwoods
Of a two-bit nowhere town
Fathered up some rock 'n' roll (baby)
So you mothers could boogie down
I ain't whistling dixie
No I'm a rebel with a groove
All around the world the ygo 'round and 'round
When they dig on my new stainless steel sound oh yeah
I'm said a lumberjack baby
And I'm gonna cut you down to size
I'm a lumberjack baby
And you're the one that gets my prize
And when you hear my motor running
You know I surely I suerly a be coppin' a rise
Oh! So I'm gonna crank it up and cut it down and check it
Chainsaw solo whoo
I'm a lumberjack now baby
I'm a lumberjack now baby
I'm a lumberjack now baby
Oooh I'm a lumberjack now baby
But I ain't jacked my lumber baby
Since my chainsaw you
Ha haa
Whether you like it or whether you don't whoo
That's the way we like it
Thanks for watching and all the best!
Is this the bar and chain out of stock?
Don't know, i bougt it without bar and chain...
"Micul Gigant"
🤣
Da, micul mamut 😁
Numai bine si spor! 🤝🤝🤝
I have 2. Good saw
Best regards!
haveing a hard time starting
How does it compare to the 2511?
I don t have a 2511, but i think that both are not good stock...
Best regards! 🤝🤝🤝
Have you compared the 151 to the 2511? what is your opinion, need to buy one. Thank you.
@@vasileios9338i have both…. The 2511 is lighter but needs a muffler mod. The 151 is a monster when ported
Try some 1/4 pitch chain
The owner will...
Thanks for watching and all the best! 🤝🤝🤝
What is the name of the chain steps?
What do you mean, what type of chain ?
@@poparamiro The model of the song at 3:28 seconds of the video?
Love the saw light weight but the 1/4" chain is just too small!
For carvers or landscape pruners it's good. I prefer 3/8, 0.050" on all my saws. Hasn't hurt performance yet.
Senzație ' dar parcă nu te regăsești in asfel de ipostaze 😁 faini spionii
Incep sa ma regasesc 😁🤣💪
Numai bine si spor!
🤝🤝🤝
SALUT ȘI SPOR DA E SUPER DAR ȘI VREO 500 ȘI CEVA DE DOLARI PARCĂ AȘA AM VĂZUT UNDEVA E O SUMĂ PIPĂRATĂ👍👍🤝🤝🤝
Salut, multumesc!
Posibil sa fie scumpa afara..
Numai bine si spor!
@@poparamiro SALUT PĂI LA NOI UNDE CĂ NU AM VĂZUT NICI PE UN SAIT
a 10 bar is ideal for this chainsaw to cut fast and with little effort.
Because it's very weak in terms of power
True!
Thanks for watching and all the best!
@@poparamiro is that 16inch ?
Why do people buy top handles for ground work 🤷♂️🤦♂️
Because why would you want to be carrying around a big ass saw if the smaller one can do the job just as well.
Not a fan to much chain no power. Thanks tho.
All the best!
Primul.
Toate cele bune si spor! 🤝🤝🤝
E bunicica, dar tot Echo 2511tes e mama usuraticelor :))
Da, corect!
Toate cele bune!
глупо такой пилкой пилять бревна,
1 рез такого бревна сокращает ресурс пилы х6(себестоимость такого распила) в сравнении с пилой с движком в 60 куб. см
к томуже пиляющий работать с пилой не умеет... итого износ пилы х50...
купил пилу, уе_ал ее и понес в сервис пилу и зп :)
зато хороший инструмент в руках подержал)))