QUICK & EASY AR-15 & GLOCK CLEANING WITH ULTRASONIC CLEANER
Vložit
- čas přidán 27. 06. 2016
- CHECK OUT THE ENTIRE LUCAS OIL OUTDOOR LINE!
lucasoil.com/products/out-door...
------------------------------------------------------------------------------------------
SUBSCRIBE! IT'S FREE! WEEKLY UPLOAD ON TUESDAYS!
czcams.com/users/subscription_c...
LET'S CONNECT!
/ bullittmcqueen3gun
/ bullittmcqueen3gun
/ stretchprecision
DISCLAIMER: I am a sponsored member of the Lucas Oil Shooting Team. The products in this video were provided to me at no cost as an incentive of being part of the team.
Music used: - Sport
Quick tip. Fill your Ultrasonic cleaner with just water. Put your chemical cleaner and parts in a zip lock bag and put it in the ultrasonic cleaner that is filled with water. That way you wont have to clean up your ultrasonic cleaner or waste as much solvent. This works great as long as your cleaner is not so harsh that it will eat plastic.
Big brain sh*t
Using a glass or plastic container is easier and prevents the likelihood of a puncture.
The Huggies baby face in the background staring back is hilarious, can't stop looking at it! :)
+Shawn Conley Man those Huggies boxes are great for storing reloading supplies! They are strong!
“The dirtiest ROFL I own”.... love it haha
This guy definitely knows what clean is, he buys the best brand butt wipes.
Great video as usual, detailed and I was wondering where I can find some Lucas products, never see them at gun shows or stores, Does Harbour Freight carry them or do I have to buy on line, I really like that small bottle with needle for oil and I think itI is great that Lucas has you on their team, It is ashame all you get is some product
I've watched several videos using the ultrasonic cleaners and different kinds of solvents. I've wondered about the o ring on the extractor as not one removed it. I would think that the solvent would degrade it in a hurry.
Awesome video my friend. Very helpful. Thank you.
+357lockdown You're most welcome!
Great video! Very apparent that you like Lucas. Nothing wrong with that, but I think in recent times I think people have found that simple green is a little easier on polymer and plastic parts but great video! Thanks for the information. I didn't even think about harbor freight for a Sonic cleaner until your video
You must rinse the parts after ultrasonic to remove the degreaser residues then blow dry then lube. If you don't have an air compressor to dry, you can use the air duster can that people use for their electronics.
Air duster can is a 200 IQ move. I don't have a compressor and I was looking for a solution. Thanks bro 🍻
Awesome video Mack I have the ultrasonic cleaner but hard to find a good cleaning solution that's for the tip much appreciated!
+james Bradshaw Glad it helped you out!
What sonic cleaning machine do you use?
He said if you don’t disassemble your firearms before you put them in an ultrasonic cleaner it will destroy your firearm. I want video graphic proof of that.
I've seen a couple of videos where they just put the frame in without any further disassembly.
Any reason you didn’t drop the Glock guide rod and spring in there too? And the AR charging handle?
Mean green does a great job and will clean your gun part efficiently so will purple power you just have to lube them after
dennis bryan using the purple Green power works good as well since it doesn’t corrode aluminum like purple power or green power.
does that solution not need to be mixed with water like the res of them?
Whats the best slide and over all lube you suggest?
Damn how do i get a Lucas sponsorship?
Thanks for the detailed video. Everyone who comments about Frog Lube being "goey" are simply admitting that they didn't use it correctly. Apply Frog Lube and then wipe it "off".... a sufficient amount remains in the metal to provide lubrication and protection. Too many people leave a layer or film of Frog Lube on the firearm parts.... that's the wrong application/use of this product. I have used Frog Lube for nearly five years on almost 30 firearms without issue.
bippie23456 or just use a lube where you don’t have to worry about that
Well said. Thanks for the review 😏
What ultrasonic cleaner do you have?
@bullittmcqueen - This was very informative, great job. I am wanting to know who/where you sent your Glock barrel to for the TiN coating? I'm currently looking for a good vendor for these same services. Thanks in advance!
dynamic weapons solutions
How often does this cleaning fluid need to be changed? I looked on lucasoil website but they don't mention. While looking for MSDS for this solution I found that Hornady also makes something similar: Hornady One Shot Sonic Clean Solution.
+TeddyBearPL I don't know the exact number of recommended uses but when it gets so dirty I can't see the parts (about 2-3 uses) I replace it
Can you use the lucas cleaner on a Nickel Boron BCG?
+Dwight Taylor Yep safe for all surfaces
No No not true Spike's will not replace your BCG nickel Boron if u put it in a ultrasonic cleaner ultrasonic cleaner so evidently nickel boron may not work well with ultrasonic cleaners this happened to me after I told spikes I had put in my BCG in a ultrasonic cleaner they would not replace it and I did feel like some of the lubricity was gone off the bolt as well ?? Still learning myself just thought I would share that info.😢
Question about the blue oil product you used with the needle point applicator. Isn't that the Lucas Fishing Reel Oil? If so, I was curious if you had any ideas of what it's made of and is it safe for all surfaces, any issues with other products, etc? Witg it not being labeled for guns, just curious since you seem to have the entire outdoor product line.
Disregard my question. I looked on the Lucas site and discovered they came out with a darker BLUE gun oil in the same bottle as the Reel oil. I had only seen the original RED gun oil they make. Looks like I'll be buying a few new Lucas products. Thanks for the video.
+Dana Carlson Thanks for the comment. I see you figured it out. The entire outdoor line is great. Safe for all surfaces
Where do you dispose of the cleaning solution once you are done with it?
put in the shiter then flush
You can reuse it, and reuse it, and reuse it.
Find the head of your HOA. Dump it on their lawn and in their flower garden.
@@williamclaud8856 You do know. That anything that you flush in the shiter, goes to the waste water plant. Then gets dumped into your local river etc. You eventually end up drinking that same water eventually. So it does not bother you to be drinking Lucas oil cleaner and lead? You should dispose of it properly with your local hazardous waste collection service.
Just a FYI I've seen reviews that stated where the seal around the metal tub part leaked causing it to stop working. People say to buy crock pot liners to put in there before you put your solution in. just some food for thought
+Jeremy Johnson I'll definitely keep that in mind
You didn't show or mention cleaning the upper, lower, trigger group, etc. Am I assuming correctly that you did clean those or do they not require cleaning when you clean the bolt carrier group?
+Bass Star since this video was about using the ultrasonic cleaner, I didn't show any of that. The lower rarely needs cleaning, just a quick visual to make sure no dirt or large obstructions are inside the lower or trigger group. It's always important to clean the barrel correctly, but that deserves a completely different video.
Are you going to be removing the finish/blued?
No
Where is the MSDS sheet? Is this environmentally safe?
Where’s the link to the ultrasonic cleaner.
Cooking up guns in the crockpot 😂
Giant Of The East I use my foot massager. Toss the Glock22 in the massager with hot water and simple green. Run it for about ten minutes take it out rinse dry squeaky clean and lube.
I was wondering if my el cheapo harbor freight cleaner would work for this.
Yes
Question sir, what air compressor do you use? I was thinking of getting the 3 gallon Harbor Freight Oil-less. Also, I head you can use Simple Green HD, the purple one. Is that true?
Jack Burton you can, but the Great thing about Lucas is that it coats the parts with an oil Film so you don’t have to put an oil film on them, like barrel or the slide. You clean in the Ultrasonic, blow dry the parts, lube the required contact points and reassemble. If you use Purple Simple Green HD/distilled water it strips all the oil completely off the parts, then after blow drying you have to spray with your oil of choice, wipe off and lube and reassemble. Using Lucas saves time because you are skipping the step of having to wipe a light Film oil on your parts. Lucas is more expensive. For $30 for 2 bottles if it saves me some time and headache it’s worth it. You can also filter the stuff and use it again if you are desperate.
Who did the TiN coating for the Glock barrel?
+TheUofAfan Dynamic Weapons Solutions
heading over to Harbor Freight to get mine! What is the life cycle of the Lucas solution? Gnna hv to call Lisa Marie and get me some! Great video brother!
+Tim Wolfe I'll have to check on the specifics but it gets so dirty I wouldn't use it more than a couple of time before dumping
Use simple green purple cleaner and you can put all your polymer and metal parts in , instead of the Lucas stuff.
This comment right here!
Does this knock off the carbon stuck to the bolt? I mean the part that requires a scraper. Before and after pics would be instructive.
It will loosen the carbon enough that you can easily wipe it off with a cloth.
What will happen if you drop your Glock frame in? There are small spots that are impossible to clean without completely disassembling.
can you reuse the cleaner in the machine?
Yes
👍🏻👍🏻👍🏻☮️thanks 🖖
Mack - my Google-Fu must be weak today. I've searched Amazon and eBay, and elsewhere and can't find anyone that carries the cleaner. Midway is out. Brownells does seem to have it. Anywhere else? I sure wish Amazon carried it. :(
+John Holbrook check Lucas's website to see if a dealer in your area carries it. Mark P at carbon arms can get you some as well, just shoot him an email or message on FB
brownells has it online
Sure hope that spray cleaner has a very high flashpoint too. You sprayed it right into the bottom of the ultrasonic.
If you don't have the will or the coin to purchase a ultra-sonic cleaner just make friends with your local jewelry store. They all have these. My buddy who owns a jewelry store has been cleaning my guns and parts for years free of charge.
Too right! We use the small Harbor Freight cleaner for jewelry!
Don't use a dirty rag on your new parts ! :)
Keep in mind if you plan on filling your tank with solution. Remember eventually you will have to dump it to refresh it. So make sure you’re choosing a solution that is environmentally friendly. Otherwise you’ll have to take extra steps to dispose of it properly.
This way can get expensive using the whole bottle of Lucas. Simople Greeen Extreme is good and friendly to the environment.
I use purple power...
What about the barrel cleaning?
If you don't know how to clean a barrel... uh... I guess... "welcome to guns"?!?
I use my sonic cleaner the same way. However, I'll spray some WD40, for water displacement, like the WD means, then use one of my wife's old blow dryer and rest the parts on a super soft towel and let the dryer get the parts dry and hot from the heat of the dryer.
I have never in over 40 years had anything rust or not dry using this method. I even put the complete field stripped pistol into the sonic cleaner and follow the same process to clean and protect the guns. I have even done this with polymer handguns. With the polymer frames i pack the hair dryer back a bit more so only warm air blows over the parts, not hot or too close.
It emits a high pitch whining sound. This sounds like the ol' lady.
You might want to be careful spraying a flammable right next to the ultrasonic cleaner with a heat source.
+Mkmac2000 True
Your video is an ad for Lucas products and nothing else.. Just take the Lucas logo and paste it over the whole video so you can't see anything and do a voice over advertising Lucas products for giving you everything for free so you can push their products... And see if you can also score an ad deal with Huggies too.
What do you have for the pin to open your rifle? I can't believe how easily you opened it. I have to fight with mine.
They push out pretty easily
Aren’t those zip ties plastic? Are they “degrading”?
Nice Huggies adv....
Wearing nitrile gloves throughout this procedure would be a good idea.
Where to lube your AR! Lol everywhere is where.
I have seen some videos where guys have done so, however you never said why it was a bad practice to place the whole handgun in the solution.
This one comes to mind..........
czcams.com/video/ZEFzvSSgfNw/video.html
That was from the guy not lubing immediately after cleaning it as it was all oxidization damage. I do frames and slides, blow them dry, then immediately lube them and haven't had any issues.
i don’t know if his ears are high or his hat is low but something isn’t right 😭
New drinking game. Take a shot everytime he says uuuummmm.
Dude! Two minutes before getting to the titled subject? Don’t need an example of why my gun got dirty. Need to know if this product is worth getting.
Oh no, wrote too soon. Now I have another two minutes on how a rifle got dirty.
If I want a tv show, I will watch outdoor channel. Oh crap! Now I am getting an informational on AR dissemble. Damn, I just want to know if the HF cleaner is good, and what products work well in it. Damn. CHANGE YOUR TITLE TO. “ my audition video for......”
Shoot the loud music!
I refuse to believe that the rifle has seen 2k rounds without cleaning.... Either he runs it bone dry or is fibbing.....
All I see is a Lucas advertising ploy
Any other lucas product you want to shove in our face? Already bought.
lol you work for Lucas?
No, did you read the description?
Bro, you sound like a Lucas ad. You like all products named Lucas. There is a rather prominent LUCAS banner on your wall. All Hail Lucas!
Well there is a reason for that. As a sponsored shooter, I am required to rep the products and promote them. I used them even before I became a sponsored shooter, in fact because I liked them over some of the other lube products I had problems with in the past, I contacted Lucas about becoming a sponsored shooter. Making videos promoting their products is the least I can do to uphold my end of the bargain for the their sponsorship.
BullittMcQueen ok, so you are paid to promote. This is my first visit to you channel, so I had no idea that you were sponsored, but yeah, it is pretty obvious.
I'm not paid. Very few sponsored shooters are paid. I appreciate your feedback. Very few of my videos on my channel are sponsor related, but yes in those videos I am highlighting and promoting products.
High pitch wining sound? Sounds like Joe Biden 😁
He talks way to much.
If it's quick then why is it a 25 min video.....