Thanks Ernest, surely saves a lot of time! And definitely saves the thread with modifying something everytime. Just watched your video on tungsten hammer! Everything done on my gun is thanks to you. My life would suck without FX Masterclass!!!
Awesome Ernest yup that's how I do it every since I got my first fx mk2 25 I was always trying different springs and weights so it's easier like that for me thanks for sharing bsafe buddy 👍
My congratulations always on and wishing you much more success fan of Brazil who admires is passionate about this work of art and I'm happy for you on this path to prosperity like guaranteed always
Great tip Earnest thnx. On one of you're earlier videos, how to change the transfer port, you had a small round hole opposite the bridged slug square hole, what is the little round hole for?....
Nice one Ernest I always look forward to your new vids…. Yea that’s a brilliant idea in your vid.. The next time my gun is apart I am going to modify the cocking block so that I can back off the pin from above. I am going to turn down a grub screw on the end to the size of the pin that goes against the hammer then drill a pilot hole all the way thro the cocking block then open up the hole from above but not all the way thro then tap it out to the grub screw size The drill the top plate to get access to it Will you do a vid on how to tune for heavy slugs on a power block version please sir😁 Wayne from South Wales 🤝
Could you do a video showing how to fix a leak from the front reg? I had a problem from there and I had to send out my gun to UA for repair. But, I want to learn how to do these repairs and maintance myself.
Hi Ernest, i have a question did i get it right? The Macro wheel is on 1 and the measurement of the outstanding rod is 5.5 mm or 6.5 mm? every one is speaking about 6.5 mm that is a little confusing maybe you can helo me out thx in advance Br. from Austria
Earnest, I have an M3 with a 600mm barrel in .25. I was hoping to make around 80fpe with it for long range ground squirrel shooting. It's not happening. Do you think they tungsten hammer weight will improve my speed/energy with only running the 600mm barrel? I know they say it works good with the 700mm or longer barrel, but currently they are not available and I need to run this 60mm barrel for awhile anyway. Thanks
Ernest question for you. Recently upgraded my MK-II to the power block. Should I keep the valve spring from the slug power kit or use the power block spring? The slug power kit spring seems almost too light for the new power block. I’m shooting NSA 38gr
Hi, C1 and rod jammed tightly I haven’t seen one back out in hundreds of disassembles. U Will probably taking off the C1 for maintenance before c1 loosens by being shot.
Mine on my m3 compact backed out after a month of it being new. It was so loose I was able to unthread it by hand without any vice grips. Same thing happened on my mk2 a few years ago. There is a high probability of these coming loose, especially if you’re shooting at high powers. I’m going to make a point when I get a new impact to just right of the bat set my c1 where I want it and to apply some loctite to save headaches down the road. I hope when the m4 comes around this whole part is redesigned where it’s impossible to come loose.
Hi Ernest, My Impact suddenly "lost power", it is shooting the 21gr Javelins only at 650-750 FPS now..., ...without any true reaction on min or max at PW. Before that 940-950 FPS without problem. No leaks, no visible malfunction, reg approx. at 145, VA fully open. I've read somewhere the issue could be that the c1 is backing out. What do you think about it? Have you something like that before? Thank you for your time and effort! BR Peter
It is the huma air .35 cal slug power kit heaviest hammerweight, I also put the 2 washers on it. Last night it would only cock at certain hammer settings. Doesn't seem to cock after pulling it apart again and reassembling.
@@microsoftchad start at PW 8 and work yourself up till unable to cock and that’s your limitation. With thicker head you will bottom out the spring then the sear won’t engage
@@ernestrowe5061 pulled it apart and put it together, it started cocking now. I see what you mean by the preload changes based on the hammerweight. I put one in that still let's me access up to 16 on macro and 5 on micro, but can't go 1 click past 5.
Thanks Ernest, surely saves a lot of time! And definitely saves the thread with modifying something everytime. Just watched your video on tungsten hammer! Everything done on my gun is thanks to you. My life would suck without FX Masterclass!!!
Awesome Ernest yup that's how I do it every since I got my first fx mk2 25 I was always trying different springs and weights so it's easier like that for me thanks for sharing bsafe buddy 👍
Great video Ernest, as always I get a lot of Knowledge on FX impacts from your videos.
👍👍👍
Great video I found it very instructional. I literally followed it while I was doing the actual procedure myself. Thank you.
Excellent info, Ernest. Now that I have an Impact M3, I need to learn all the tricks to keep it running like it should
You are the Man my friend!!! Best regards from Portugal 🇵🇹👊
merci pour cette vidéo un vrai pro vous ete la seul personne a qui je fait confiance grand merci d un papy de Normandie (FRANCE)
Awesome and informative video as always! Thank you!
Very well done, I'm ready to do mine. Thanks
My congratulations always on and wishing you much more success fan of Brazil who admires is passionate about this work of art and I'm happy for you on this path to prosperity like guaranteed always
Great and thanks for sharing it with us...
Great tip Earnest thnx.
On one of you're earlier videos, how to change the transfer port, you had a small round hole opposite the bridged slug square hole, what is the little round hole for?....
Always the best 👍🏻
👍👍
Nice one Ernest I always look forward to your new vids….
Yea that’s a brilliant idea in your vid..
The next time my gun is apart I am going to modify the cocking block so that I can back off the pin from above.
I am going to turn down a grub screw on the end to the size of the pin that goes against the hammer then drill a pilot hole all the way thro the cocking block then open up the hole from above but not all the way thro then tap it out to the grub screw size The drill the top plate to get access to it
Will you do a vid on how to tune for heavy slugs on a power block version please sir😁
Wayne from South Wales 🤝
If you were from north Wales, we could get together and make some delicious brownies!
@@2cthetruth I spent a weekend up ur way on angelsay I had a lot of fun with you Gog’s 👌👌
Доброго времени суток ты молодец высший класс
👋🏾sup brAh! Good info my braddah🇵🇭👊🏾😎
Awesome!
Could you do a video showing how to fix a leak from the front reg? I had a problem from there and I had to send out my gun to UA for repair. But, I want to learn how to do these repairs and maintance myself.
Hi Ernest, i have a question did i get it right? The Macro wheel is on 1 and the measurement of the outstanding rod is 5.5 mm or 6.5 mm? every one is speaking about 6.5 mm that is a little confusing maybe you can helo me out thx in advance Br. from Austria
Hello, sir So that power can be maximized, what needs to be upgraded?
That's a good way of doing things man ⭐⭐⭐⭐⭐ . Show us a good way of tuning the rifle that is not main stream 🌜🌝🌛
Hola desde Argentina le quería consultar que distancia recomienda usar el c1 ? Caño 600mm
Earnest, I have an M3 with a 600mm barrel in .25. I was hoping to make around 80fpe with it for long range ground squirrel shooting. It's not happening. Do you think they tungsten hammer weight will improve my speed/energy with only running the 600mm barrel? I know they say it works good with the 700mm or longer barrel, but currently they are not available and I need to run this 60mm barrel for awhile anyway. Thanks
Olá pode me informar o modelo desse bipe?
Fx MK2 has low wind power, how to fix it?
Ernest question for you. Recently upgraded my MK-II to the power block. Should I keep the valve spring from the slug power kit or use the power block spring? The slug power kit spring seems almost too light for the new power block. I’m shooting NSA 38gr
Keep the same valve spring
What's your website?
Hello !! I have a problem with my impact M3
Can You help me please ?
Where can I buy one of those C3 tools?
I'm confused, is that a 13.5gr hammer weight?
What set up would benefits from that compared to the tungsten hammer?
Custom 285gn 80/20 tungsten 18.4gr
@@ernestrowe5061 Do you sell these? 910?
No thread lock Ernest will it not back out over time 🤷♂️
Hi, C1 and rod jammed tightly I haven’t seen one back out in hundreds of disassembles. U Will probably taking off the C1 for maintenance before c1 loosens by being shot.
Mine on my m3 compact backed out after a month of it being new. It was so loose I was able to unthread it by hand without any vice grips. Same thing happened on my mk2 a few years ago. There is a high probability of these coming loose, especially if you’re shooting at high powers. I’m going to make a point when I get a new impact to just right of the bat set my c1 where I want it and to apply some loctite to save headaches down the road. I hope when the m4 comes around this whole part is redesigned where it’s impossible to come loose.
Hi Ernest,
My Impact suddenly "lost power", it is shooting the 21gr Javelins only at 650-750 FPS now..., ...without any true reaction on min or max at PW. Before that 940-950 FPS without problem. No leaks, no visible malfunction, reg approx. at 145, VA fully open. I've read somewhere the issue could be that the c1 is backing out. What do you think about it? Have you something like that before?
Thank you for your time and effort!
BR
Peter
Open and look.
Hey Ernest, yesterday I swapped my hammerweight and now it won't cock? Any ideas what it could be?
It is the huma air .35 cal slug power kit heaviest hammerweight, I also put the 2 washers on it. Last night it would only cock at certain hammer settings. Doesn't seem to cock after pulling it apart again and reassembling.
@@microsoftchad start at PW 8 and work yourself up till unable to cock and that’s your limitation. With thicker head you will bottom out the spring then the sear won’t engage
@@ernestrowe5061 thank you, I'll give it try soon. I was on the lowest settings still from the install.
@@ernestrowe5061 pulled it apart and put it together, it started cocking now. I see what you mean by the preload changes based on the hammerweight. I put one in that still let's me access up to 16 on macro and 5 on micro, but can't go 1 click past 5.
Where'd you get that bipod!
Amazon 3 years ago $45
@@ernestrowe5061 I have several black ones like it, but I want one that color!! Lol.
Ernest where can I get that C1 tool at?
Hi, at 910airguntuningandrepairsllc.com
@@ernestrowe5061 Thanks allot
Unit impian