Whelen WeCan Education
Vložit
- čas přidán 20. 08. 2024
- This is here to show you the benefits of moving from the traditional LC Whelen set-up to the WeCan platform. I understand that the unknown can be a bit scary and overwhelming but hopefully I can dismiss some of the myths of the software based platform with this video. Enjoy.
Thanks for the video! I just received my Inner Edge Duo (white/amber) and was a little unclear about the WeCan Control Module and how it operates. Now I'm up to speed, thanks again!
Well how did you manage to have the file to import?
The reason why I was wondering because I have a standard SX bar and I was wondering if there’s a way I can convert it
you can but it will require a lot of work and money
emtanderson511 because the reason why I was wondering is because I’ve already had to put a mother board in my SX bar and that’s why I was wondering if there’s a way I can convert them because I already have three of these bars
So what kind of board is in the light bar for it to be only two wires
@emtanderson511 I am buying a Whelen Justice that has one of those control modules on the back to control different features, where does that connect to the lightbar at?
How is it wired on the inside of the bar
not sure what you mean?
emtanderson511 Because I have a standard SX bar and I was wondering if there’s a way I could convert it
Nice video you seem to be in the know , I’ve got a freedom led and other Wheelen lights on my van all amber but when I run them all after a time the pulse on and off all at once it’s on a second 100amp Barrie and this can happen randomly I’ve never had this issue beforehand and they have been in for over a year any advice I’m using an optilink controller ? If that helps cheers
hello,
how can i contact you?
I want to know more about the We can module,
Thanks
So could any libertys be used with the wecan module?
Negative, you need the WeCan I/O inside the bar with the associated wiring...
emtanderson511 what's the I/O board numbers on that liberty board I would need?
I have no idea, no way I'm taking the whole bar apart sorry
Hi Daddy
Hi Baby! Love you pal!!
I like your video. I am trying explore this system but before I go and invested the money I was wondering if you could answer a question. I am not sure if I understand correctly. I understand running the power and communication cable to 6 point connection. But I am unclear of the programming the software. I uploaded the program and it shows me the 18 inputs. I then have the ability to program that input, to have the light bar do whatever it is I chose, regardless of the cable color??? The cables are more or less just there so I can have a legend to know what goes where and what does what for the future?
Can I have input 1 be rear lights / 2 front and rear / 3 corners / 4 just front / 5 all white lights. and etc and as long as I run the cable from input 1 to the corresponding output on the control head the light bar will do what is programmed.
If you could email me about that that would be great. rkern428@gmail.com
Richard Kern I never check my messages here...my apologies. If you still have these questions email me emtanderson51@hotmail. com or on elb at emtanderson.