Case 580 Super L Backhoe Boom Swing Arm Cylinder Removal and Repair
Vložit
- čas přidán 26. 08. 2024
- Case 580 Super L Backhoe Boom Swing Arm Cylinder Removal and Repair,
and replace all the seals, and reinstall and test... Without removing the cylinders.....
Swing arm cylinder seal kit - 122535A1
amzn.to/2RlqoFI
amzn.to/32naj8D
amzn.to/3ht1DBY
Stabilizer are cylinder seal kit - 1543275C1
amzn.to/3ipEIZJ
amzn.to/3mhVNXW
amzn.to/2RlWyB6
amzn.to/3itkm1F
amzn.to/3bQyhMG
Boom arm cylinder seal kit - 1542919c2
amzn.to/2FxBrZC
amzn.to/2RyxdnD
amzn.to/3hr7K9Q
My CZcams Video's
My main CZcams channel = / @bigdavid1
Live Cow Cam = www.youtube.co....
Live Chicken Cam = / @chickenlivec. .
I appreciate your sharing of knowledge.
Thank you very much, I got to rebuild both Swing Cylinders on my Case 580-E this Spring, I was worried about the job, But not now, You took all the guess work out of. Great Job. Jeff
thank you for your comment, this the first time I even attempted those...... as you can probably tell in the video.............
@@bigdavid1 No, It looked like you new what you were doing.
I wanted to ask you, did you leave both Hydraulic Lines connected to the Cylinder?
I bought the 2 Swing , 2 Stabilizer, 1 Boom Cylinder repack kits a few Years a go. Im going to start with the swing Cylinders first because there in the worst shape.
O ya, I also got a kit to reseal the Steering Ram, Ill bet that will be fun to get that little Seal that you used the Tool to collapse put in place.
Im going to order that install tool. Jeff
@@MrCowboyjeff on those two cylinders YOU CAN LEAVE THE HOSES CONNECTED, because the way they are designed and hooked up the fluid leaks to both of them. But, you should remove the nuts from both cylinders and leave them loose so the back pressure will not build up...also I have videos on the stabilizer and the boom..........
Thank you for the great video. I think you are a lot stronger than you give yourself credit and you also have a great mechanic assistant ( your wife).
After watching your repacks, I can't wait to get a flight stateside to do my jcb swing cylinders! Thanks.
The best video on youtube.So well explained
Great video , built my confidence to tackle the job myself , got all the necessary tools on line , the inside seal I put back the way it came out , the lip facing out , " evidently it was put in wrong before I got it , and i just realized i did it wrong as well
thanks for making this video.your wife did a great job with the camera.thanks
@bigdavid1 the way it was explained to me, whatever side the pressure is on is the side you put the cup of the seal. Great video.
"I wish I was twenty years younger"....me too, and the arthritis hurts. But great educational video. When I got back from vacation my son had broken the head off the cylinder rod. Next week I'll give it a try.
Thanks you
Hola amigo muy buen vídeo, que torque le das al tornilllo que aprietas con la pistola neumática...
No le pone torque ,por eso le pone un poco de sellador de roscas para que no afloje
Thank you for the vid. Very informative, explanation clear and concise.
Thanks for posting this greatly informative video. One question: What snap ring pliers did you use to remove the snap rings on the cylinder pins? I'm having a tough time finding anything that will work. Brand, handle and tip size would be helpful.
Thanks for making this video because I just bought a Case 580 SL and it’s leaking in the same spot and to have someone work on that would probably cost a lot of money and what is that pliers to take off the the round cotter pins with the 2 holes called
Great Job Thank You for sharing
Great video. Talk to cylinders people today 400.00 plus to repack this cylinder. I will doing for price of kit
if I ever have to do what you did ill have to buy all of the tools from case
Best instructional video so far... Good job
thank you for you're video
Great Video. Thank You
Muy buen video no lo pueden traducir al español. Se lo agradecería muchísimo 🙏 gracias.
This is the spanner wrench needed a lot huskier
Awesome video, where did you purchase the tool for the seal to fold for the inner cylinder and what is that tool called? Thanks
I can't get mine off, the cylinder gland nut is ridiculous, bending the pin tool....heat, what do I do?
Thank you. This will help me on mine. You may have put the dust seal in upside down in the gland. What do you think?
Sure looks upside down. The steel side of the dust seal should seat into the gland... Looks to me like he hammered the neoprene wiper into the seat.
I didn't watch long enough before commenting. He actually addresses it later on.
thanks awesome video
What size is the socket to take apart the cylinder that big socket that is on your impact wrench and how big is that impact wrench is it 1/2 inch
You should have taken off one hydraulic line on each cylinder and it comes off easily and goes straight back into the cylinder with out any problems
Thanks for that video, good job
Enjoyed your video, getting ready to attempt my case 580 SL swing cylinders. Does it matter if my boom is in the lock position or should i place it to the ground as was yours?
Thanks in advance
Very helpful . Thanks!
I bought a 1966 ck 530 case 180 Diesel Backhoe for the farm for $2500.00 everything is been replaced and rebuilt
Good explain. Blessings
Great video¡ muy bien 👍
the best $5 thousand that I ever spent
Hi and thanks will this work on my 580 C backhoe ?
I also bought a 1973 Ford f-700 DUMP truck for $2500.00 for the farm the DUMP truck has been well maintained before I bought it
Congratulations on the video Mr David. Please, do you replace the oil that came out of the cylinders in the hydraulic system? Embrace of your subscriber, Luciano, from Brazil.
Thank you good video
The last O-Ring 22:54 you matched up with the old one you took off you ended up using the old one instead and tossed the new one back.
Good catch
Excellent presentation sir very well done
Is it possible to just do one side or do both nuts have to be loose....will unpinning one side work?
Makes it much Easier when both nuts are loose so you will not have any back pressure
bravo viejo !
I am only 23 years old
Hi BigDavid.. im not sure if i have missed the part where u put in the hydraulic fluid.. all i saw was the greasing part.. was that it? Or that process was left out from the video?
u installed the wipper backwards
yes, I notice that too.
You are correct, just past that spot I did mention In the audio that I installed backwards...
Where did you get the tool to fold the inner ring?
Amazon
Your videos are great! I’m going to do this job on my 590sm. Do you use the hytran fluid in yours or have you used a aw46 for the hydraulics?
aw46
i will like to know were to get that stool for th cylinder big nut
I purchased the tool from Amazon, OTC (1266) Adjustable Gland Nut Wrench
Boa noite mecânico qual o nome dessa chave que você usa no minuto 20:00?
Desde já muito obrigado pela atenção.
Thanks! What did you do with the hydraulic lines (disconnecting or isolating the cylinders) before taking it apart?
Just put a plug in the lines where no dirt Enters the hose
What is the socket size used in this video at 4:53 ?
I’d like to know where you got those heavy duty snap ring pliers
ebay years ago
@@bigdavid1 all right thanks bud
Hi Big David 1
Great vídeo.
Could You help me Please?
I don't speak inglish but i try do My Best escuse My mistakes.
How do I remove the liner and whip from new Holland LB75 stabilicer control valveI I allready removed the two ear bolts on the valve and it. Does not come muy.
Sorry, I'm just a hobbyist not a mechanic I just repair my own machine....
مرحبا انت من اي مكان انا لى حفرة كيس احتاج بعض قطع الغيار
watching the reinstall it appears that you did go back and correct the wiper seal that was in backwards. Why did you not mention that in the video...gave the impression that it did not matter
give me a break, getting close to 80 years old having a hard time remembering my damn name.... And you waste your time for comment like that
bigdavid1
So did you change it?
at time 25 min 45 sec ... in the video, it stated that I swapped the seal, looks like when you're young you don't have much attention span either...........
where do we get one of those spanner tools? or brand & part number please. Nice job on the video!
I purchased mine on Amazon, OTC (1266) Adjustable Gland Nut Wrench
bigdavid1 Thank You!
my Backhoe has been well maintained before I bought it
oh, sht its heavy :).
Air has to be let in from the other side of the cylinder to break the vacuum which will not let the cylinder rod to be pulled out.. You did not show how to do it..Instead you devoted entire video to show the obvious how to replace the seals.
F