Jeep Fuel-Cut Triggered RESET
Vložit
- čas přidán 26. 11. 2018
- How to reset the system after a crash which disabled the fuel. The cluster will show Fuel-Cut Triggered. Car will crank but not run.
Follow these steps to reset and start the car. - Auta a dopravní prostředky
Thank you so so much, just got my car fixed and no need to take it to dealer. You save me lot money and time.
Thanks so much! Saved my day!
NB! Make sure that your turn light lamps are connected physically! W/o this, your turn lights will be mixed up - when you switch right - left is ON and opposite! Mentioned sequence right-neutral-left-neutral-right-neutral-left-neutral will become operatonal ONLY when BOTH turn light lamps are physically connected! Yesterday we had such case (Jeep Compass 2019 generation 2). We've been replacing passenger's-side headlight with a new one and had not connected it. And only when headlight connection was done, fuel-cutoff reset sequence became operational. So bare this in mind!
Thanks for posting this. I’ve had my jeep parked trying to figure out if this was the issue. I think you just solved all my problems !!!
Been following this video for some time now in hopes someone posts a solution.
I tried the mentioned solution in the video and didn’t work because I had the entire front end torn down.
Thanks again.
@@king_K1 Y're welcome )
thanks this works...I had a little issue at first..make sure your turn signal lights are working.
Thank you bro!!! It served me. Seriously. Thank you very much for your video
Thank You for this. I work at a auto auction checking in cars this helps very very much thank you
Thank you very very much
I do this after watched your video
The engine started ❤
Thank you so much this work perfect in my car I have the same problem thanks for making this video
So helpful. 😊thank you ❤
Cant thank you enough awesome vid!
God bless you ...thanks for share bro..👍
Thank you so so so so much ❤️
Thank you very much it's work
it works, i just save time and money !!!!!
Today try this.really its work🥰
Thank you soo much😭😭😭
Will this work on my 2014 overland.?
You are the man! I've had to keep classifying these jeeps as non start because I couldn't find a reset switch like on Fords
Can this be done on the 2019 Jeep renegade
I just sent some money. Thanks man
Thank a lot!!!!!!!!
Buenas yo tengo una renegade chocada de el frente y no me enciende y ya ise lo q dice el manual q más sería amigo chekiar
Hi thank you so much for making this video it help me a lot again thank you so much.
Thanks 👍
Hell yes this worked great thank you so much
Glad it was able to help you!!!!!
@@FLiPMOTiONS just pick mine up and couldn't get it to start. Literally first go and it fired! Saved me a bit of extra work. :) Thank you SO much again!
Preciated it man actually works
Thanks your video help me a lot last July when I bought a 2018 compass and it had that issue.
I just bought 2019 Chevrolet Traverse and it was in an accident also but the car won't start or crank up. Is there a way to reset the fuel line in there also?
I’m honestly not sure. I would double check in the owners manual. So easy to over look that darn book. Best of luck!!!
@@FLiPMOTiONS thanks for the help but wasn't able to find it
Thanks
I have a question do u have to take out the old gasoline my jeep was crashed 2 years ago just now working on it
I think it would be a good idea to put fresh gas into it, however, I would personal just try to get it running first and see where your project takes you.
I did the procedure but when i go to shut power button off the dang vehicle trys to start
Hi there, I appreciate you posting this video. I had the same situation happen to my truck. But when I came to do the crash reset like you posted in the video as soon as I tried to start the car all the ignition lights turned on and the signal lights keep blinking, both of them, and the truck is acting like someone is stepping on the brake because the break light is on. So when I come to do like how you showed me in the video I can’t do it because the signal light never stops blinking and when I come to turn the ignition off it won’t turn off I had to take out the battery to get the car turned off. So please if you know anything about what I should do please let me know so I can do it. Thank you again and have a good day.
Did you find out how to do it I have the same problem
Same problem here ☹️
Trying to do the same thing on my Alfa romeo . I can power the car up no problem but the push button won’t turn it off how it’s supposed to .. I have to disconnect the battery every time .. I wrecked my car on the highway .. car hydroplaned did a 360 and lined the front end str8 up with the crash barrier wall and destroyed the front end .. dash and steering wheel airbags went off and now I have all the bcm faults on the dash .. but the 1 that’s stopping the car from starting is the transmission selection and the fuel cut off switch ..
Same Issue over here! Did you find out how to fix it?
Hola me podrias ayudar tengo una jeep compas 2020 con ese mismo problema pero no me deja reiniciar el sistema ya que me dic que el vehiculo no esta en park aunque si esta.
hola pudiste arreglar tu camioneta , si es asi comparte que tuviste que hacer yo aun sigo batallando
I have a 2015 jeep renegade doing the same thing but the thing is i never hit anything and it just popped up and nw my jeep wont crank over. I tried this but it seems to not be working for me can anyone help me out here??? I greatly appreciate it.
I’m currently going through this were you able to get it fix somehow ?
The right turning signal was on for the first part of the video. How did you manage to get it to turn off. My turning signal stays on and i am unable to perform the procedure. Help.
SN: I tried turning it off with success.
Hi, can u say me how u turned it off? I have same problem.
It’s part of the the procedure. Just perform the tasks as you should & it’ll work. Entire procedure also has to be done in less than 60 seconds
Quisiera q alguien lo aga en español
Hello thanks for the helpful video,
My Jeep Compass turn signal lights doesn’t works and the emergency lights are blinking.
So I’m not able to do this procedure to turn off fuel cut off triggered light indicator
Same issue with me.
Were you able to make it work? Having the same issue
@@RicardoHernandez-qn1oz I also have this problem :( Did you figure it out?
Guys any Issues to solve this problem? For me it Working but i can't turn off Inginiton. ☹️
same here, did anyone get the solution?
Ok thanks
Hello. It will work on JGC Laredo 2019 alltitude. I hit the beaver😮 in Poland😂😂😂
I’m having same issue tried the procedure but can’t follow trough due to the switch not cutting off
Did you figure it out?
I can´t turn off the warn lights =(
Can anybody tell me how this works on a 2019 I don’t even have a key it just is push button
Same here ... help!
Same here. Mine is a push button
The Jeep Grand Cherokee became blocked after the accident. The inertia switch is open. Maybe someone knows how to solve this problem?
Grand Cherokee Wl 2023
Work a 100%
Hey buddy I have the same Jeep, girl hit a tree. Getting a bunch of lights on the dash. I don’t get a crank at all. I tried your steps 200 times and nothing. Did you guys have to replace and fuses or sensors.
Henry Garcia did u get sorted I’m stuck too
Conor Drumm am stuck also please let me know asap
Same here
Do y’all have the old headlights connected still ?
@henrygarcia3726
Any one found out the solution? I have the exact same problem
That didn't work