This was a life saver changing my split intercooler hose, annoyingly my front parking sensors don’t work now so I’ll have to take it off again and have a fiddle
Glad the video was useful. Check the connector for your parking sensors. It is easy to pull the wires when the front-end comes away, and the connector gets quite muddy so may just need some WD-40.
Thanks Scott! I'll be referencing your video for removing my bumper today. Got to fix a few things and also need to remove the alternator, don't think removing the front bumper will help with that but it'll be done at the same time. My horn has also decided to stop working so need to check that out too! 👍
The car is on ramps so can’t remove the wheels. If it was on axle stands then wheels could be removed but that wouldn’t really make removing the bumper that much easier.
Excellent Video to help me change my intercooler radiator. Worth watching these guys for all help on freelanders 👍
Just one guy and his cat!
This was a life saver changing my split intercooler hose, annoyingly my front parking sensors don’t work now so I’ll have to take it off again and have a fiddle
Glad the video was useful. Check the connector for your parking sensors. It is easy to pull the wires when the front-end comes away, and the connector gets quite muddy so may just need some WD-40.
Thanks Scott! I'll be referencing your video for removing my bumper today. Got to fix a few things and also need to remove the alternator, don't think removing the front bumper will help with that but it'll be done at the same time. My horn has also decided to stop working so need to check that out too! 👍
Good luck! Good excuse to fit some airhorns!
Thank you so much! Very clear!
Always useful tips and appreciated, 👍. Really useful being ambidextrous like that ! 😉
Excellent video,very good audio,Thankyou.
Thanks Tom! Glad you found it useful!
Cheers now that’s ten thousand pounds 😂 honestly mate thanks for such a slow yet informative video
That's great. Thanks very much.
Nice video, front bumper removal is sufficient for oil filter access?
Watch my oil filter change video. No need to remove the front and it won’t really help as radiator still in the way
This is great you don't have a turbo change video by any chance do you.
Not turbo change, only turbo dismantling
Hi! If I only want to remove the grill, I still have to disassemble everything, right?
Yes, the grille is glued to the inside of the bumper
@@BeavisPits damn 😅 will be a bigger project than expected...
Good video.!
Do I have to remove the bumper to remove the radiator
As far as I know, you don’t have to remove the front end to get the radiator out, but it would certainly make access easier.
Do you need to take the under tray off?
Germplus, no you don’t, but I had removed mine as I was fitting a sumpguard at the same time
I mean 10mm bolts not M10!
Man why don’t you make it easier removing the tire
The car is on ramps so can’t remove the wheels. If it was on axle stands then wheels could be removed but that wouldn’t really make removing the bumper that much easier.