OPPSK 18x10 LED Par light review. DJ, Stage, Church, Party Lights. RGBAW-UV (Blacklight)
Vložit
- čas přidán 6. 09. 2023
- I take a closer look at the OPPSK Par light. This is an 18x10Watt LED which offers Red, Green, Glue, Amber, White and UV color mixing. Offers Auto Fade, Jumps, and Sound Active mode with a sound sensitivity adjustment. With a 45 degree beam angle, these lights will make nice wash effects for stages, dance floor and walls.
THIS FIXTURE AVAILABLE HERE -
amzn.to/3Rdqmjw
Chauvet Xpress 1024 Lighting Controller/DMX interface (What I currently Use for my light shows
amzn.to/3pBuqOP
WMX1 Controller
amzn.to/3ZGMi7t
Donner Wireless DMX
amzn.to/3wKFMl5
O-Clamps for hanging lights (I use these for other lights and for attaching lights to speaker poles)
amzn.to/3Jhyg5r
American DJ Lighting Stand I Use
amzn.to/35g6QtK
Hazer Used for Video
amzn.to/3m2rFOO
My next totems
amzn.to/3LcYCX3
Wireless Lapel mic MOVO
amzn.to/3eSbnu3
Zoom f2 Compact recorde - lavalier
amzn.to/3J2vC36
Camera Light from SANDMARC -Battery Operated LED
bit.ly/3Ej9TR4
Editing Software used is Cyberlink Power Director 20
amzn.to/3wpN5y3
Batteries of Choice for Wireless Gear
amzn.to/3bbbWtF
Camera Light
amzn.to/3gtqQxp
ZOMEi 14" Dimmable Ring Light
amzn.to/2SiVQX4
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Looking to get back into the music , make some home videos , introduce myself , audition for other musicians , this seems like a good fit to startup with , then add as we go along , any suggestions?
Thanks for watching.... not sure what you are asking about. 🤷♂️
What is wrong if you have 10 lights but onlt 7 resoond to the board. I noticed 7 have a blinking dot between the D and 0. But the other 3 are set to d001 but no blinking dot
Sorry, just saw this comment. Did you figure it out? I can not remember what the dot meant. I would have to refer to the manual.