Timemore Sculptor | Aligning - how to access the burrs | 064/064s/078/078s
Vložit
- čas přidán 24. 03. 2024
- A quick look at how to take apart the front end of the Timemore Sculptor series of grinder to gain access to the burr chamber for aligning and cleaning.
This video was not sponsored.
For collabs and reviews, please reach out to me.
Instagram: jmo944_
Thankyou....very clear and concise directions.
Have you also made a reassembly video?
That is the process that seems to be easy to muck up.
Hey Paul - thanks for the comment! I actually have the makings of the reassembly video, just not edited together. Maybe I should put it together and upload? I agree, it’s not the easiest grinder to take apart and put together again.
Video on reassembly is now live!
Hi, thanks for this video. I just noticed you moved the pin back by 2 spots, was this to allow for finer grinding? If so, have you encounter any problem from doing this?
Hey! Thanks for checking out the video. Yes, this was to allow for the burrs to ‘chirp’ at a setting of ‘0’ and allow the grinder to be calibrated to the finest as I use it most for espresso. There has been no issues, as it limits the grinder from going any finer than the set stop point.