Hello Raj sir.... Very nice video , in fact I'm using these vesrah ceramic brake pads they are excellent..... before i changed my stock brake pads at 9000 km and they were not giving punch at all after 2000 km driven, the front stock brake was quite good but rear was even not trying to stop (lazy brakes). I m very very very happy with the ceramic brake pads, till now I m on 15000 kms and they are not even used half now , i m sure ceramic pads will work 15000 kms for sure . Specially the rear works amazing now with no noise at all . Everyone can go with them.
Very informative video bhai! Always wondered why does Rear rim collect dust so much extra dust only in dusty highway rides. Well, now I got to know! Great quick video!!! Those who are tired of brake pad noise but not wanting to spend on brake cleaner, just manually remove brake pads, and take them to your kitchen. Scrub and wash them like how vessels are washed. It has worked on mine stock mineral pads, but however ever since I switched to Vesrah ceramic ones, I have never heard such noise
Sir, My cb350 rear disc is scored ( having deep ruts) It is a good idea to get the disc machined so it’s smooth finish ? Changed to Vesrah after the OEM pads gave a short life. No problems since then. Thanks for your wonderful videos.
Hello Raj, hope you are doing great bro... Do you know the size of cb350 highness headlamp?? I was thinking of installed LED with a more powerful combination 8000k
@@RajkaGarage Thank you. Is it safe to use gear 90t oil to lubricate? As most of the people suggest it? And keresone to clean? Would it affect the life of chain and sprockets
Hi brother , i just got a new hness e20 variant. I have a persistent squeaking noise on slow speeds upto 20. The noise stays even if im not braking. It usually starts coming when i let go of the throttle and bike goes below 25/20 and goes away when i apply the throttle. What could be the problem? Im done with my first servicing after that the noise went away for 2 weeks and came back again 2 days ago
I recently changed my rear brakepads at 16000 kms. And for the first time there is a squeaking sound from the rear end at speeds below 45kmph even if I'm not braking. Looks like my problem is same as yours. Did you find any solution?
@@ssc1348 yep i did its just dust that gets accumalted on brake pads and if you observe when you press the rear brake that sounds goes away. It will go away after a few weeks nothing to worry about. Apparently pretty common with new brake pads
Hello raj I own a new cb350 on my exhaust manifold a yellow tint is appeared, can you tell me why this tint came , is it overheating or something else and how can I remove it?
Sir , my 1 month bike recently after 1st service needs brake light paddle adjustment almost every day , any solution?? If not done then brake light stays on always
Hello Sir! Jus after replacing brake pads and traveling home from service centre from around 60kms , noice started coming from rear wheel and it automatically stopped the next day but i observed that the brake pads are continuously rupturing with the disc...is it bcoz of the poor alignment of the wheel???
Hi. Could you suggest the right time to change tyres. Iam now using the stock tyre for 2.3 years now covering 26k kms. Pls have a video on tyre upkeep and replacement period.
Hi Dinesh, If you have already covered 26k kms, i will suggest replace the tyres positively before monsoon starts. Ideally in month of May itself as later on tyre shortage is common. The Stock MRF tyres are hard compound and hence although you can see visible tread on them, there is hardly any physical grip left in them. Also a great suggestion. I was thinking about making something on tyres and feel this is the right time with summer and monsoon following soon. Cheers and Happy Riding 🤘
Hi Raj! I accidentally sprayed some chain lube on the rear disc brake & now it's not biting properly. I've tried cleaning with soap, pressure washing and it's still the same. Pls help.
Oh.. please remove the brake pads and clean the pads and disc with a good brake cleaner spray. You can either buy it from Amazon or any 4 wheeler automobile spares shop. It will solve the problem.
Hi Raj, the same incident happened with me also. But even after the 2nd service of bike & brake pad are changed, rotar plate is also cleaned. But..... I'm not getting that feel in the brake as earlier. Please give some suggestions, what should i do now !!!!
Chain clean karte huye meri highness ke pichle break pad me desal chala gaya hai aur pichle break ka play khatm ho gaya hai ab break apply nahi ho rahi hai sub kuch tight ho Gaya hai Ab kya kare ?
How are nikavi brake pads for rear? I've ordered a pair of front and rear, just for experiment as I already have vesrah handy. Do they also make souns?
I haven't used the rear pads from Nikavi as they are Generic organic pads, unlike the sintered pads for the front they have. Have little apprehensions on local organic pads. Front sintered pads are performing well, but the feedback at slow speeds is dull as they are expected and design to deliver at high speeds. Have installed Vesrah in few friend's bikes and found them to be much more efficient than both OE and Nikavi. Nikavi are anyways white label Chinese product.
@@RajkaGarage I bought both front and rear for 536 so I'm not expecting much. But vesrah is also not that efficient in my opinion, as you use it for 2k-3k kms, you'll notice a harsh feel in the feedback from lever and a unusual noise from the disc, however it doesn't make any difference as I'm still using it from the past 8k kms. It goes away after cleaning though.
Ohk..so the one you bought are both organic pads. Coz the sintered front pads are at around 1100/- I will be switching to Vesrah for both front and rear for my upcoming RJ ride. So will get to feel the performance over a longer period as currently I am only getting that for short durations when I ride any of the friends CB with Vesrah.
Congratulations buddy 🎉. If the bike is still in its early kms of running, try not to speed unnecessarily and keep the engine RPM down in each gear. Don't accelerate too hard, especially when riding with a pillion. Do this for the first 1500kms which will ensure that the engine running-in happens appropriately and keep it in good condition for later part of its life. I am soon making a separate video on the riding best practices to get good mileage. Stay tuned to that.. Cheers and Happy Riding 🤘
Do you ride in too much of dusty conditions. Try sanding the top surface of the pads little and check. Coz I know so many riders in my CB group who moved to Vesrah from OE pads and the noise has vanished.
Hi Sunil, any particular reason you are looking to clean the O2 sensor. How many kms have you done on the engine. Generally you need to clean the O2 sensor at and interval of 40-50k kms. Anyways, if you plan to, you can remove the sensor from the exhaust header and use a good to throttle body cleaner spray to clean it. Make sure to do this when the engine is cold and spray some good amount of WD40 on the sensor thread before removing it as the sensor thread will have good amount of corrosion on it. Please also take care of the connector wire while opening the sensor.
Hi Raj. Thank you for giving the reply. My vehicle has run 12k kms, but it shows some lack of power and lack of smoothness and some roughness on giving the throttle. Mileage is around 38kms in city conditions. So I am planning to clean the O2 sensor. Is there any risk in cleaning it?
No risk as such as long as the dismantling and assembly is done appropriately. But, it's too early for the O2 sensor to have any fouling on it, especially given fact that these BS6 engines runs much cleaner. Which engine oil you are using right now. Is the the Honda 5W30 or 10W30? Also have you checked other things, like chain slack, tyre pressure..air filter condition.. I have heard some service centers are replacing the Air filter only after 18k kms which is the company recommended interval. Whereas in real world conditions it needs to be replaced every 5k kms for optimum performance.
Honda hness ke time pe honda ne non abs brake pads diya hai toh jaldi extremely jaldi and ghatiya hisaab se worn out karta hai pls try vesrah brake pads for hness as other commentors are saying
Hello Raj sir.... Very nice video , in fact I'm using these vesrah ceramic brake pads they are excellent.....
before i changed my stock brake pads at 9000 km and they were not giving punch at all after 2000 km driven, the front stock brake was quite good but rear was even not trying to stop (lazy brakes).
I m very very very happy with the ceramic brake pads, till now I m on 15000 kms and they are not even used half now , i m sure ceramic pads will work 15000 kms for sure . Specially the rear works amazing now with no noise at all .
Everyone can go with them.
Perfect observation!
Hello. Is it cheaper online or offline? If online please do ping the website.
In rainy season?
Keep going with Honda Highness CB350
Very informative video bhai! Always wondered why does Rear rim collect dust so much extra dust only in dusty highway rides. Well, now I got to know! Great quick video!!!
Those who are tired of brake pad noise but not wanting to spend on brake cleaner, just manually remove brake pads, and take them to your kitchen. Scrub and wash them like how vessels are washed. It has worked on mine stock mineral pads, but however ever since I switched to Vesrah ceramic ones, I have never heard such noise
Yeah.. switching to ceramic pads is a permanent solution for the noise plus better braking efficiency and longer service life.
Thank you so much Raj sir..this video was very needed, i was facing this issue since long ago
Cheers mate.. go for the ceramic brake pads. They solve the issue permanently.
Very Helpfu and informativel! 🤝
Sir,
My cb350 rear disc is scored ( having deep ruts) It is a good idea to get the disc machined so it’s smooth finish ? Changed to Vesrah after the OEM pads gave a short life. No problems since then.
Thanks for your wonderful videos.
Sir, kindly bring your detailed review on CB 300f. Also, please confirm which vesrah brake pads are compatible with CB300f ?
Hello Raj, hope you are doing great bro... Do you know the size of cb350 highness headlamp?? I was thinking of installed LED with a more powerful combination 8000k
Please make a video on chain maintenance.
Coming up soon next..
@@RajkaGarage Thank you. Is it safe to use gear 90t oil to lubricate? As most of the people suggest it? And keresone to clean? Would it affect the life of chain and sprockets
Hi brother , i just got a new hness e20 variant. I have a persistent squeaking noise on slow speeds upto 20. The noise stays even if im not braking. It usually starts coming when i let go of the throttle and bike goes below 25/20 and goes away when i apply the throttle. What could be the problem? Im done with my first servicing after that the noise went away for 2 weeks and came back again 2 days ago
I recently changed my rear brakepads at 16000 kms. And for the first time there is a squeaking sound from the rear end at speeds below 45kmph even if I'm not braking. Looks like my problem is same as yours. Did you find any solution?
@@ssc1348 yep i did its just dust that gets accumalted on brake pads and if you observe when you press the rear brake that sounds goes away. It will go away after a few weeks nothing to worry about. Apparently pretty common with new brake pads
@@shaunakthorat5758 Ok, thanks.
Hello raj I own a new cb350 on my exhaust manifold a yellow tint is appeared, can you tell me why this tint came , is it overheating or something else and how can I remove it?
Sir , my 1 month bike recently after 1st service needs brake light paddle adjustment almost every day , any solution?? If not done then brake light stays on always
Hello Sir! Jus after replacing brake pads and traveling home from service centre from around 60kms , noice started coming from rear wheel and it automatically stopped the next day but i observed that the brake pads are continuously rupturing with the disc...is it bcoz of the poor alignment of the wheel???
Bro did your problem get solved because I am also facing this issue after service
@amj7090 after 2-3 days noice automatically stopped
@@avinashjacob6374 bro what cause of this issue and thank you for the reply
@@amj7090 because of new brake pads
@@avinashjacob6374 bro it's first service do you think they changed brake pads also ?
Hi. Could you suggest the right time to change tyres. Iam now using the stock tyre for 2.3 years now covering 26k kms. Pls have a video on tyre upkeep and replacement period.
Hi Dinesh, If you have already covered 26k kms, i will suggest replace the tyres positively before monsoon starts. Ideally in month of May itself as later on tyre shortage is common.
The Stock MRF tyres are hard compound and hence although you can see visible tread on them, there is hardly any physical grip left in them.
Also a great suggestion. I was thinking about making something on tyres and feel this is the right time with summer and monsoon following soon.
Cheers and Happy Riding 🤘
@@RajkaGarage thank you raj ji...
@@RajkaGarage which tyre should I go. Ralco, ceat or zapper itself.
Go for Ceat or MRF itself.. Ralco has the block pattern design and when used in front it gives uneasiness while cornering.
You can try Pirelli as well
Sir, i am facing a very mild sound like "zzzzzzzzzz" while throttling in 3rd gear, can you plz explain me wt might be the issue?
Same issue on gear 3 Chucky chuku noise coming
Hi Raj! I accidentally sprayed some chain lube on the rear disc brake & now it's not biting properly. I've tried cleaning with soap, pressure washing and it's still the same. Pls help.
Oh.. please remove the brake pads and clean the pads and disc with a good brake cleaner spray. You can either buy it from Amazon or any 4 wheeler automobile spares shop. It will solve the problem.
Hi Raj, the same incident happened with me also.
But even after the 2nd service of bike & brake pad are changed, rotar plate is also cleaned. But.....
I'm not getting that feel in the brake as earlier.
Please give some suggestions, what should i do now !!!!
@@adityasaini1760 Ride bike as much as possible and apply rear brake often, the heat generated from the disc will evaporate.
Chain clean karte huye meri highness ke pichle break pad me desal chala gaya hai aur pichle break ka play khatm ho gaya hai ab break apply nahi ho rahi hai sub kuch tight ho Gaya hai
Ab kya kare ?
How are nikavi brake pads for rear? I've ordered a pair of front and rear, just for experiment as I already have vesrah handy. Do they also make souns?
I haven't used the rear pads from Nikavi as they are Generic organic pads, unlike the sintered pads for the front they have. Have little apprehensions on local organic pads.
Front sintered pads are performing well, but the feedback at slow speeds is dull as they are expected and design to deliver at high speeds.
Have installed Vesrah in few friend's bikes and found them to be much more efficient than both OE and Nikavi. Nikavi are anyways white label Chinese product.
@@RajkaGarage I bought both front and rear for 536 so I'm not expecting much. But vesrah is also not that efficient in my opinion, as you use it for 2k-3k kms, you'll notice a harsh feel in the feedback from lever and a unusual noise from the disc, however it doesn't make any difference as I'm still using it from the past 8k kms. It goes away after cleaning though.
Ohk..so the one you bought are both organic pads. Coz the sintered front pads are at around 1100/-
I will be switching to Vesrah for both front and rear for my upcoming RJ ride. So will get to feel the performance over a longer period as currently I am only getting that for short durations when I ride any of the friends CB with Vesrah.
@@RajkaGarage I saw them on amazon, they had a valid return policy, that's the reason I thought, lets try and see.
Hi Sir any free play in rare break caliper on H'ness
Sir agar cb me engine cheak lite aa jaye to kya kra
Recently bought highness and my first bike
Could you please suggest me how to get good mileage.
Congratulations buddy 🎉.
If the bike is still in its early kms of running, try not to speed unnecessarily and keep the engine RPM down in each gear. Don't accelerate too hard, especially when riding with a pillion.
Do this for the first 1500kms which will ensure that the engine running-in happens appropriately and keep it in good condition for later part of its life.
I am soon making a separate video on the riding best practices to get good mileage. Stay tuned to that..
Cheers and Happy Riding 🤘
@@RajkaGarage i will follow for sure
Thank you sir
Waiting for your new videos…
After changing to Vesrah brake pad Jaring noise is high sir ...
Check your pad fitting and disc condition. This is the first case I have come across.
@@RajkaGarage checked sir,3 to 4 times checked with service center sir,they clean the pad it will work after 2 r 3 days it starts again...
Do you ride in too much of dusty conditions. Try sanding the top surface of the pads little and check. Coz I know so many riders in my CB group who moved to Vesrah from OE pads and the noise has vanished.
@@RajkaGarage let me check sir...
Veshra price both front and rear
Drop me Hi on rajkagarage@gmail.com
How we can clean O2 sensor
Hi Sunil, any particular reason you are looking to clean the O2 sensor. How many kms have you done on the engine. Generally you need to clean the O2 sensor at and interval of 40-50k kms.
Anyways, if you plan to, you can remove the sensor from the exhaust header and use a good to throttle body cleaner spray to clean it. Make sure to do this when the engine is cold and spray some good amount of WD40 on the sensor thread before removing it as the sensor thread will have good amount of corrosion on it. Please also take care of the connector wire while opening the sensor.
Hi Raj. Thank you for giving the reply. My vehicle has run 12k kms, but it shows some lack of power and lack of smoothness and some roughness on giving the throttle. Mileage is around 38kms in city conditions. So I am planning to clean the O2 sensor. Is there any risk in cleaning it?
No risk as such as long as the dismantling and assembly is done appropriately. But, it's too early for the O2 sensor to have any fouling on it, especially given fact that these BS6 engines runs much cleaner.
Which engine oil you are using right now. Is the the Honda 5W30 or 10W30?
Also have you checked other things, like chain slack, tyre pressure..air filter condition..
I have heard some service centers are replacing the Air filter only after 18k kms which is the company recommended interval. Whereas in real world conditions it needs to be replaced every 5k kms for optimum performance.
Thanku Raj for the advice.I will certainly look in to the factors you have mention
Honda hness ke time pe honda ne non abs brake pads diya hai toh jaldi extremely jaldi and ghatiya hisaab se worn out karta hai pls try vesrah brake pads for hness as other commentors are saying
I need brake pads in Kolkata