I just watched another one doing this exact same thing, I used these back in ohio, Oak Point Stairs, we made stair parts of course,, but, ours wer electric and air powered, almost automatic, for fluting, I would hold onto the router, from right to left, and back in the same cut to clean the cut... then once back to the right, I would pull back on the router which hit a switch that turned the piece so far ( they had to be set up for how much we were doing ), and for depth of cut.. and do the same process again,,,, ( this is now considered hand made... ), the other router lathes worked in this same manner but with air power, they were automatic,, just set them up, and hit start,,, last video I watched the guy was plunging the blade in too slow,, was burning when he started the cut, and stopped,,, he was doing twist also.. ( anyone thinking of selling these for like a business,,, remember to think again,,, ),,, many companies like the one I worked for have their cuts patented... you can get into a lot of trouble if you copy someone elses work and then dont even realize it was patented....good luck and happy woodworking
जो मशीन सन 1968 में मैंनेँ बनाई, आज तक यू ट्यूब पर पर किसी से नहीं बन सकी है । उस वक्त मेरी आयु 16 साल की थी और आज 70 साल की है । उस लेथ मशीन पर कुछ भ बना सकते हैं । नई दिल्ली से जांगिड़
espectacular, trabajo
awesome job! thanks!
I have a sears router crafter and all original parts etc Bought some 20 years ago! I must get around to trying it out sometime!
Pose cuisine
Very interesting device! Good luck!
Sears used to sell a machine that did this back in the 70's. It might have been called the "Router Crafter". There are probably a few floating around.
Gostei essa maquina me ajudaria muito pq não sei tornear seria possível mandar o esquema de fabricação e o valor
I just watched another one doing this exact same thing, I used these back in ohio, Oak Point Stairs, we made stair parts of course,, but, ours wer electric and air powered, almost automatic, for fluting, I would hold onto the router, from right to left, and back in the same cut to clean the cut... then once back to the right, I would pull back on the router which hit a switch that turned the piece so far ( they had to be set up for how much we were doing ), and for depth of cut.. and do the same process again,,,, ( this is now considered hand made... ), the other router lathes worked in this same manner but with air power, they were automatic,, just set them up, and hit start,,, last video I watched the guy was plunging the blade in too slow,, was burning when he started the cut, and stopped,,, he was doing twist also.. ( anyone thinking of selling these for like a business,,, remember to think again,,, ),,, many companies like the one I worked for have their cuts patented... you can get into a lot of trouble if you copy someone elses work and then dont even realize it was patented....good luck and happy woodworking
another cool video
Thanks to enjoy it.
Anura
@INSERT2015
Thanks , anura@spectra.lk
Very nice! are u making and selling this beautiful lathe? :-)
Nice work
Если поменять диаметр барабана с троссом,изменится и шаг нарезки(я так думаю).
can you use this machine to cook a spit roast ?
and the lathe to cut it when its done
Do you have copier system ? This must have for this like lathe.
عمل جميل
Me encantan esas maquinas desearia comprar me interesa tenerlo
Tengo interés en: comprar uno pero el # ya no es el mismo digame k hacer gracias
Nice.
Behave!
a question: Chambers of the machine in Germany buy?
gostei da maquina onde adiquiri esta maquina o endereço naõ atende
Десять штук делать будешь месяц
A.distância no
lugar
Достаточно примитивно.
Doug Sheets day56
Nice work who machicen cost
donde la puedo comprar
How The difrent pitches are cut?
जो मशीन सन 1968 में मैंनेँ बनाई, आज तक यू ट्यूब पर पर किसी से नहीं बन सकी है ।
उस वक्त मेरी आयु 16 साल की थी और आज 70 साल की है । उस लेथ मशीन पर कुछ भ बना सकते हैं । नई दिल्ली से जांगिड़
i want to buy one possible?
WANT TO SELL YOUR sears R/CRAFTER MINES BROKEN
I'll give you 5 ruppees + an old donkey for this item !
Keeyada meka
Booking kaise karen
@marke1952able
My mail is anura@spectra.lk (anura at spectra dot lk) and phone 0094777582730 and Fax 00 94 37 2236526
BR
Anura