dude.. I initially thought that cabinet was overkill and boy was I wrong... that's a kick ass design you came up with there. Good job, I'll remember you when I steal it to make my own :)
If any come and see this please give the man a like for it take work and a lot of thinking on how to help oneself and others make their machines better ok .
Very freaken niceeeeeeeeeeee, Thank you for the video of it, made my day, now I can keep the dust under control by making my own. It's a darn good idea and I'll make sure others that have the Crafter come and see your video :) keep it up, if I get stuck I'll give you a line ok, Thanks again.
Jason--thanks for posting, great job. I actually just picked up a router crafter today. May I ask--if you are just "rounding" your stock do you hook up the router carriage to the cable?
I round it off in a wood lathe before using the router-carver.You have to hook up he router carriage to the cable, either to the top or bottom, depending if you want to go clockwise or anticlockwise.
Hi again, I doing the doors or the 3 panel in Plexiglas completely, will soften ( heat gun ) in a semi circle on top and then at sides to meet down to the side boards as you have. I'll put latchets on all 3 pieces and adding hinges from the front panel to be able to push it along when not spiraling , it usually doesn't dust at front toward you. or perhaps make a cut groove on the front to move it along and avoid the dust all together. The side panels you have , what size circle you made?? That's all for now, when I accomplish it all I'll make a picture of it and send it to you, thanks again very much.
Hello. What is the maximum length of wood you can put in the router lathe and also what is the maximum diameter of wood you can use please. Also is the same as the trend router lathe .thanks.
The biggest I have used is 750mm long, you could probably go to around 900mm safely. The maximum diameter is 90mm. I don't know the Trend Router Lathe.
Ohhhhhhh!!!!, they are linked up via the rods,turning the turning is moving the router at the same time! I see now. Did you invent this ? I had to do a barley twist once,my wife was frustrated because she manually turned the lathe while I worked the twist with chisels,if she’d seen this video she’d have slapped the taste buds out my mouth that day. 😂😂
I have one of these my only compliant is I cannot make anything longer than 600mm example I cannot do a barley twist on a cane that is 900 mm long . Any ideas how to lengthen my work area ?
dude.. I initially thought that cabinet was overkill and boy was I wrong... that's a kick ass design you came up with there. Good job, I'll remember you when I steal it to make my own :)
The cabinet is awesome!! Well Done!!
Thank you.
dang, you get an A+ at this ideal cabinet.
Thanks for your positive comment.
I always tell my daughters to stop and think and you'll come out with a solution :) t.y.
If any come and see this please give the man a like for it take work and a lot of thinking on how to help oneself and others make their machines better ok .
Very freaken niceeeeeeeeeeee, Thank you for the video of it, made my day, now I can keep the dust under control by making my own. It's a darn good idea and I'll make sure others that have the Crafter come and see your video :) keep it up, if I get stuck I'll give you a line ok, Thanks again.
Yes, feel welcome to come back and ask if you get stuck. Just try to be patient for a reply. I am a very busy person.
lol, I can understand :)
Fu#$ing amazing! Thanks for shareing
Hi how to make the Router craft lathe nice working
Do you have instructions for making box that is really nice
How do buy and wher is available
He very nice piece bit name model
happy new year
The bottom middle clap down, doesn't it gets in your way if you need to make a smaller part?
There are two screws that can be loosened and it can then be moved into any position.
Jason--thanks for posting, great job. I actually just picked up a router crafter today. May I ask--if you are just "rounding" your stock do you hook up the router carriage to the cable?
I round it off in a wood lathe before using the router-carver.You have to hook up he router carriage to the cable, either to the top or bottom, depending if you want to go clockwise or anticlockwise.
Thank you@@jasonyoung7782
Como algo para comprar una
Hi again, I doing the doors or the 3 panel in Plexiglas completely, will soften ( heat gun ) in a semi circle on top and then at sides to meet down to the side boards as you have. I'll put latchets on all 3 pieces and adding hinges from the front panel to be able to push it along when not spiraling , it usually doesn't dust at front toward you. or perhaps make a cut groove on the front to move it along and avoid the dust all together. The side panels you have , what size circle you made?? That's all for now, when I accomplish it all I'll make a picture of it and send it to you, thanks again very much.
That sounds interesting. The size of the holes on the sides are 100mm or 4 inch in diameter. I'll look forward to see it when it is finished.
Yes, due to bad back all in wood would be heavier to remove from my router table.
Is that a template at the beginning with the castle cuts?
That's correct.
Labagnimt
Hello. What is the maximum length of wood you can put in the router lathe and also what is the maximum diameter of wood you can use please. Also is the same as the trend router lathe .thanks.
The biggest I have used is 750mm long, you could probably go to around 900mm safely. The maximum diameter is 90mm. I don't know the Trend Router Lathe.
Thanks
That’s totally awesome !! 😁👍🏽
You turn the turning manually I see,but what’s moving/driving the router ?
I’ll keep looking,but I don’t see it yet.
Ohhhhhhh!!!!, they are linked up via the rods,turning the turning is moving the router at the same time! I see now.
Did you invent this ?
I had to do a barley twist once,my wife was frustrated because she manually turned the lathe while I worked the twist with chisels,if she’d seen this video she’d have slapped the taste buds out my mouth that day. 😂😂
I have one of these my only compliant is I cannot make anything longer than 600mm example I cannot do a barley twist on a cane that is 900 mm long . Any ideas how to lengthen my work area ?
hehehehe, VERY nice.....wanna sell it?
How to buy please
I just purchase a NOS crafter on ebay. Would you sell me plans to your enclosure? Thanks, Jerry
I did not draw up any plans. It just progressed as it went along.
Those small 2x2 and 2x4 pieces at ends and center are they to hold templates?
Yes that's right, they have 5/16-18 4-prong T-Nuts at the back, to hold them on.
How to buy 8279787790
@@ytfoodie what is this numeration about?
@@ccccen +918279787790
Whatsapp no
I want to buy
Price Rs?
Address .
+
Selling my dad's Craftsman Router Crafter 720.25250.
Why? Just wear hearing protection and use vacuum after.
দাম কত?
যোগাযোগ ঠিকানা ও ফোন নম্বর দিন।