How To Restore Antique Refrigerator Compressor || Reconditioning of An Old German Fridge Compressor
Vložit
- čas přidán 12. 09. 2021
- In this video we tried to show the rebuilding of a damaged refrigerator compressor.
*********************************************************************************************************************************************
To Order please Contact :Mian Tariq Mahmood Lucky Compressor House Faisalabad, Pakistan.
Whatsapp: 00923006602953 - Jak na to + styl
There's something to be said for any economy where restoring equipment makes more sense than tossing it in a landfill, as well as encouraging this sort of skilled craftsmanship.
In Brazil we wear boots, gloves and glasses for our safety
@@fabiopimentel9573are you from Brazil?
@@fabiopimentel9573 Sou do Brasil, sabe me falar qual curso posso aprender a restaurar compressores de geladeira e ar condicionado?
I did exactly this type of work right here in the USA. The compressors had V clamps to hold the two Bowles together, a complete shop with all I needed to keep these parts clinically clean, new parts, testing equipment, safety gear, benches, million dollar shop, etc...you can't just wipe them down with a rag. I am struck and amazed. Amazed these pumps last a few months, maybe longer? But when you gotta do what you gotta do...we are so spoiled here. Good for them....Great job!
Moving out of caves and getting with the times is not 'spoiled'.... it's just a case of evolving.
Having little education, living in a corrupt shit hole, following stone age bullshit religions are all a recipe to be a total nothing!
What was done to this compressor was a waste of time. If you were doing this you were doing pointless work. To check a hermetic compressor you just check suction and discharge, drain the oil, heat it up to get out any moisture and put new oil.
Cutting it open and doing nothing more than looking at the windings and lapping the discharge connection is stupid. A megger can check the windings
THEY LAST FOR MANY YEARS.!
@@sammyd7857 Shut up. They have many years experience . Much more than you
In a country where they’re actually willing to work for a living! Hard honest work!
The machines he's working with and on with are a symbol of our betrayal. Why would we want to work anymore.
The politicians are among the most crooked though.
hard honest mesothelioma
I think people everywhere do what they need to. I'm sure if they didn't need to do this, they wouldn't.
@@rudyruiz9521 they dont need to poop in the water they drink... but here we are.
I just love sitting through an entire video only to have the thumbnail for the next video plastered over the top of the finished product!
That pisses me off!
It probably said, made in Great Britain on it 🤣
It gets me too. Just turn off the next video suggestions in settings. 🤷🏻♂️
that's really your only concern with this video?
Потом думаешь, что купил новый компрессор, а это оказался перемотанный из Пакистана)
Hard working boy
Rinse the compressor inside, and then treat the internal parts with an abrasive. Brilliant!
Not so much "How to", more like "How it's done"
My ex wife's Mother has a refrigerator bought in 1950 that is still working, that's amazing.
Does she now give you the cold shoulder...
Ask google about Einstein's fridge.....thats not amazing,just 'patent'ly efficient.
(Boy scouts build these all the time.Just add water.No batteries included.)
@@boogieknee3781 not very efficient, that's a lie, just more reliable from having no moving parts. They're still used in RVs and specialized applications.
I have one 1954 year, called Dnepr, works ok 110v.
Made in Ussr
Я когда-то в 90-е годы занимался реставрацией компрессоров для холодильников. Был большой спрос. В принципе можно восстановить компрессор , но при условии:
1 . Давление компрессора по воздуху должно быть не менее 50-60бар.
2. После сварки кожух компрессора герметизитруется и накачивается азотом до 12-15бар , после чего опускается в воду для проверки качества сварного шва.
3. Электродвигатель и картер компрессора перед сварочными работами промываются спиртом.
Как решается в общем этот ремонт?Замена обмоток?Или они их сами перематывают?
Пакистанцам спиртом вера не позволяет мыть!)
@@dvvvideo Ни кто там ни чего не перематывает это галимый контрофакт.
инверторные есть смысл ремонтировать простые неактуально
@@Hatori88100 видно этикетка панасоник , тот же абибас))
Eres chingón para arreglar compresores!! Un saludo desde GUAMUCHIL SINALOA MEXICO!!
Дети у них молодцы-учатся у взрослых реальным профессиям, рабочим, мужским. Им бы туда еще газ провести и хорошие условия на работе и было бы им намного приятнее работать.
قطعا زحمت کشیدی و واقعا بهت تبریک میگم من به عنوان یه همکار از صمیم قلب برات آرزوی موفقیت میکنم و امیدوارم کنار هم رشد کنیم و بترکونیم و بتونیم روزی که اصلا دور نیست به اهدافمون برسیم ممنون از وقتی که گذاشتی و این پست مفید رو طراحی کردی
Gotta love those panasonic compressors
Soy de República Dominicana.y me acuerdo que cuando era niño mi padre y yo reparabamos compresores.buen video
I love the Panasonic sticker at the end...gonna go out on a limb and assume this isn't an official Panasonic workshop lmfao
Hat off to that young mans weld 8:05. It was so clean that it hurt to see him have to grind it down. I wish him better work conditions, more pay and shoes on his feet one day. Yes I know sandals are common there, but it can't be healthy. I have seen older men earning surely 100 times more than what he earns that didn't work as clean and well as he did.
There's no labour like child labour.
@@rinkinkel ... Your comment is baseless. This young man is somewhere around 14 to 15 and is in a apprenticeship just as an apprentice would be in a westeren country. From the looks of the work place and his work his employer will be more than happy to offer him a full time job one day. If he doesn't he would have to be an idiot. We can only hope that in western countries young people finally learn to get up off their asses and learn a decent profession again. Simply because sliding from one chair to another in a university, to then be unemployed when they are finished is not a solution. No one needs shit loads of empty headed big mouths that have no idea what it means to put in a honest days work. Not all of them of course, but too many because the system has been screwed up over the last 40 years. BTW for those that have no inkling about how the real world functions at some point (usually the last year of learning a trade) one is expected to participate in the production to prove that one has absorbed what is necessary to fullfill ones place in society. That's called logic, but we have people forming politics these days that lack it up to 80% in their own heads IMO.
@@robertthomas6127 Send your son there, why don't you.
Excelente trabalho parabéns ,aqui do Brasil são Paulo.
Молодцы, очень трудолюбивые мастера!
Well done, very hardworking masters!
После такого ремонта в камере будет минус 120 градусов причем через минуту.😁
Os caras são incríveis. De forma simples, organizada e produzem as ferramentas perfeitas.
Thanks for watching 😍
This is a prime example of why “Panasonic” compressors consistently fail right out of the box.
)))))))))
come on! this is not Panasonic manufacturing plant. These guys have made their own sticker of Panasonic to impress or fool people. Who knows which compressor was it.
@@MrTalhakamran2006 Hence, the quotes around “Panasonic”.
😂
Hu
I always wondered what was inside these compressors. Now I know 👍👍👍
No cabe duda que teniendo la herramienta adecuada, nos aventabamos esos trabajos aca en Mexico, que por cierto, es raro el que restaure compresores, al menos no en mi zona...y muchos se ofenden si les dices que reparaste uno.
en esos paises la pobreza los obliga y aparte de eso la cultura de ellos se inclina mas por el reciclaje que por productos nuevos
Welcome to Thailand CZcamsr ❤️💕👍❤️💕
Excelente reparación 👍 No ví si probaste la bobina .Hoy en Argentina se está reciclando todo ! Pero no otorgan garantía.!!! Gracias por la sencillez de los trabajadores cuando hay ganas de trabajar todo es posible
Es muy muy bueno reparar..y en México. Antes se reparaban los compresores. Y los motores en general..ahora ya nos invadieron los productos chinos...con bobina de aluminio....
Buena idea, pero faltó probar el compresor con gas refrigerante porque lo que aqui muestran no es ninguna garantía de buen funcionamiento. Un compresor probado al vacío comprimiendo aire no prueba nada
Esto no és una reparación , solo una limpieza al interior del compresor !
Cierto eso es cuando de alguna manera amas tu trabajo y te divierte lo que haces pues todo lo hacen bien con calma y sin pasar nada por alto
@@xocoyotzin9917 cierto pero el ptoblema no es eso el mayor problema es que antes los tecnicos en refrigeracion tenia conocimiento en rebobinar y todo lo hacia el misno tecnico pero hoy dia todo lo quieren comprar e instalar y ya a cobrar y la verdad es un trabajo que lleva su tiempo por ejemplo hoy se daña una nevera y sale dañado el compresor nadie lo repara pues no saben rebobinar y optan por reemplazarlo por uno nuevo y el cliente ya no puede costear mejor desechan el aparato
Gracias por su excelente explicación por favor para arreglar las válvulas cuando no comprime puede subir un vídeo gracias Dios me lo siga bendiciendo grandemente espero su respuesta gracias
Por favor mi amigo va a subir el video reparando los flaper o válvulas de alta y de baja gracias Dios me lo siga bendiciendo grandemente
no creo que entienda lo que le pide pero puede que le responda... un pueblo tan preparado para las tareas manuales y que sea tan pobre,,
Não confio em compressores reformados , mas se tem garantia parabéns belo trabalho
No guarantee only warranty sir for 10years
Не перестаю удивляться, как практически без станков, производится ремонт сложной техники. Молодцы!
И не удивился, что они слили все масло из него и не налили нового?)
@@user-jr9vp8dq8k Меня удивляет Ваша уверенность в том, что они не залили масло.))
c каких это пор компрессор бытового холодильника стал считаться сложной техникой?
Но всё равно молодцы.
@@mkbsnab6773 Ну и не до такой степени простая, что б в любой слесарке починили.. Я разобрал как то ради интереса, нормальное такое количество запчастей получилось))
Он и не производится.
И в конце наклейку на клеяли Panasonic , ахренеть 😂
Чего только не было в 90х . И Panascanic и Panasoanic и даже Abibas...
Молодцы. Видимо это у них экономически целесобразно. Но чистота внутри компрессора под вопросом, патрубки не закрывают пока работы производят.
Как ты думаешь куда продают эти залипухи? Завтра сгорит компрессор купишь такой взамен пакистаносоник, повезет месяц отработает и клина словит!
техника безопасности зашкаливает при работе с болгаркой
@@Hatori88100 на внутренний рынок, полагаю.
@@Hatori88100
Да чтобы клин убрать, не нужно ничего резать!
@@user-ib2hl9ci7k капиталка по регламенту компрессора холодильника))))
very complicated process 👍👍👍
Thanks for watching
the moral of the story 'just because something looks new it doesnt mean it is new'
@off spec if you knew it wasnt new would you pay new price for it because it looks new?
@off spec you didnt see him open an old used compressor? then replace a couple of bits with other bits made from who knows what? then put it back together? and you think that makes it new? tell me would you buy a new car and when discovering it was 2 years old with new paint and tires that would be new?
@off spec your car engine would not be considered new but refurbished. when reconditioning old engines only parts requiring replacing are replaced. you could have an oil pump that was considered ok so re-used but that oil pump could well stuff up after a few miles or a hundred miles. same goes for many other parts, it will not be a 'new' engine. even if every part besides the block heads and rods crankshaft cam shafts headers inlet manifolds were replaced its still not new!
i have worked in the reconditioning engine business. its done to keep costs to a minimum. stories of 'new reconditioned' engines blowing up are every where. the only was to get a new engine is to get one from a place like ford or chev. new still in the crate mate
@off spec if i was rebuilding an engine for me, yes it would last many years because i would replace everything possible with new. but if your buying 'off the shelf' you get minimum replaced. and if you dont see it being built then until it goes boom you dont know what has been done inside.
Радянські компрессори добре піддавались реінкарнації . Головне - вони майже всі були однаковими . Це дуже полегшувало ремонт .
Ага, и весили они как пол холодоса под 20 кг)))
Отлично.
Не бит ,не крашен , абсолютно новый
Ни разу не ремонтировался 👍👍👍
Panasonic)) Kazuhiro Tsuga помрет от остановки сердца после такого видео
هههههههههه ذكرتونا بأيام الحصار في التسعينات بالعراق🇮🇶🤣😁😂
ОМОВЕНИЕ В ЖИВОЙ ВОДЕ. И, О, ЧУДО! ЭТОТ КОМПРЕССОР СТАЛ ВЕЧНОМОЛОДЫМ.
Greetings from the U.S. You guys are great, you really know your stuff and do excellent work. I was pleased to see what is inside of them compressors. We have a throwaway society here. No repair, everything is junked. It is very costly and wasteful in the U.S. You guys should wear eye protection when cutting and grinding metal. Eyesight is precious.
Also earprotection, gloves, dustmasks ffp3
The rapture will happen without a doubt. The rapture will happen much sooner than many believe (much less than 10 years according to all the environmental, weather signs , israel timelines, astronomical etc showings: luke 21:11 . It will happen without any warning , not one , in an instant , catching masses of people off guard just like God always does, ie the flood , sodom and gomorrah ~ a rude awakening .
Matt. 24:44 jesus said
Therefore be ye also ready: for in such an hour as ye think not the Son of man cometh.
luke 12:40
Be ye therefore ready also: for the Son of man cometh at an hour when ye think not.
No one knows the exact day or hour the rapture will happen is a certainty . THE RAPTURE CAN HAPPEN NOW at ANY TIME make no mistake !! . Please awake to Christ Jesus which is the ONLY hope NOW and dont let yourself find out it IS all true later when its too late and you have been left behind in the most terrible times the earth Has Ever experienced Before and ever will...for anyone who sees this and doesnt know what to do please If you havent given your life and heart to Christ Jesus you will have REAL BIG problems way bigger than any problems you have Ever had If you are left here on earth after the Rapture . After the Rapture The USA , Worldwide , will face More evils , Inner city chaos, firearm wars etc etc ,power and water , food shortages , military invasions,mass executions (yes much blood will be required by antichrist ) etctec than it Has EVER been seen Before and you surely dont want to be Here then . We Have Time NOW to change , please seek Christ Jesus while there is still time to save ! no one knows the day or hour of the rapture ,But the rapture will start out just like any other day .....The Rapture will Take Place In the day In Broad daylight, sunny day , In an Instant FLASH without ANY warning , and there will be peoples Driver Ids, cell phones ,wallets found in various parking lots , Purses bill folds Found at work etc etc with NO explanation , and People VANISHING so No One can refute it has taken place. .
romans 10:9-10 That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead, thou shalt be saved.For with the heart man believeth unto righteousness; and with the mouth confession is made unto salvation. rapture ready . com
Many of those that are left behind were seen in deep regret and many hung themselves on fences on interstates , and roadways and different places, their cars left by the roadside and many others also used their cars to kill them selves wrecking into things . It will be a horrible time , and regret will cause many to commit suicide .
NOW is the time, dont wait until its too late seek Please Christ Jesus NOW.
Those not going in the rapture and left behind , who rejected Christ Jesus' Love, and those that are practicing sin will have a big nightmare when left after the rapture example woman dancing in topless bar practicing sin , will NOT go in the rapture when it happens abruptly , and many other examples of willfully practicing sin daily .matthew 25 :1-13 parable of the 10 virgins, 5 were wise 5 were foolish and payed a severe price . Acts 3:19 all unrepented sins19 Repent ye therefore, and be converted, that your sins may be blotted out, when the times of refreshing shall come from the presence of the Lord.
romans 10:9-10 That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead, thou shalt be saved.For with the heart man believeth unto righteousness; and with the mouth confession is made unto salvation.
Please seek Christ Jesus NOW with your heart, please repent change while theres still time left .
@@kingdommusic5456 Is this AOC?
This about labor cost. They probably get 10US per day. For them is cheaper to fix rather to buy a new compressor.
@@climaland навязанной димократией по американски.Достали пол мира!
نیاز سرچشمه ابتکار است . این کشور صنعتگران قابلی دارد و در سایه این صنعت حتما آینده خوبی در انتظار این کشور است سلام من از ایران بر شما
Good job I am Rakibul Hasan in Bangladesh
Nice place to work, very clean and organized...looks so healthy!. I'd like to work there...
Sorry, you don't have the skills needed. There's a mcDonalds at the corner tho.
sarcasm?shirley knot🐱
all the junk compressors in the basement ?
طيب انا عندى ١٠٠٠ماطور
They are doing the best they can with what they have I suppose, but do steel toe boots not exist in India/Pakistan?
굿,환경 보호도 실천 하고 재활용 하시는 분들 정말 기술이 좋으네요
czink czank czonk chińczyk majtki ściąg
عمل متقن ورائع. حرفية عالية . صراحة عمل جيد. فقط بعض الإحتياطات فيما يخص وسائل السلامة الفردية: قفازات،نظارات واقية،حداء وكمامات...أما من ناحية العمل فهو احترافي.
who am I to critic, they literally do this everyday of their lives if not from the time they could walk, a master craftsman if I ever seen one
Kontennya sangat bermanfaat sekali bagi saya . Terimakasih 🙏🙏🙏
Wait, did that sticker say “Panasonic”??? 😜
I hope (doubt) they pay them enough because they won’t be living long healthy lives doing that work without personal protection equipment. The noise, the particulate matter, the chemical exposure, the UV from the welding process, etc., of risk in one single job. I do respect their work and I hope better for them. Good work and good luck!
оттуда же и абибасы по всему миру расходятся))
The complacent disregard for a simple guard on the cutting disk made me SMASH the dislike button.
The lack of gloves when dealing with a component that he KNOWS has been SATURATED with toxins,not ONCE does he wipe his hands.
The fluid he poured out,will undoubtedly be flushed downsteam,significantly affecting anyone in the now contaminated foodchain.
Water treatment aint happenin' there,so good luck eating the local produce.
This is precisely why I get bloody angry when they ship 'recycling waste' abroad "because its cheaper".
This video highlights the real reason WHY we should do it ourselves,locally.
Guard will not always save you,
AFAIK there arent deadly chemicals in a compressor.
@@iwantitpaintedblack A seat belt won't always save you in a car accident either.But like a guard it should always be used.
Its absence is indicative of complacency concerning safety procedures,such as the SAFE removal of the gases they have been in contact with.
EACH compressor has been in contact with toxic refrigerant for at least a decade.
This one worker is repairing several per day,thus increasing his exposure.
The heavy metals he is grinding from the compressor are being converted into dust which he is inhaling throughout his working day....
(...these metals will enter his lungs,lead,solder,carbide,iron,aluminium,mercury).....since they will enter the bloodstream DIRECTLY they will cross the blood brain barrier before they ever reach his kidneys...... VENTILATION,and AIR FILTERS are needed but for this poor sod...it is already too late.
....the same dust is all over him after he leaves work and goes home.
google.... industrial disease/steelworkers....
...also....when he goes home to his family......even if he showers he is still contaminated with all that dust,its embedded in his skin pores,
if he picks up his toddler,that child will suffer poor health.Ask any uk.coalmining family for confirmation of the HARM DONE TO THEIR CHILDREN FROM THIS CONTAMINATION.
Education is a wonderful thing to continue AFTER your lessons are over.
Who knows WHY your teachers never took the time to teach you these basic facts.
Google the effect on the longterm health on METALWORKERS,MINERS,of the toxins they inhale.
PARTICULATE matter,risk factor is not merely inhalation,it is immolation**,nice comment,even I missed the U.V.factor...well spotted.
**Myself I am wondering when he will be dumb enough to grind something made of just aluminium,following that procedure.
As THAT will be all over the news when he does.
(mysterious explosion,darwin award,and a local cartographical update*)
*Redrawing the local maps due to exposion/firestorm.
Look up the ....sony factory explosion....(aluminium paint aerosolised and lack of ventilation in the factory.....and somebody sparked)same thing happens with a bakery silo,there is also the infamous wood flour explosion in the uk++
++google the news reports and the hse report of the events leading up to.......bosley explosion court case.
Me saco el sombrero ante ustedes por esas ganas increibles de trabajar y salir adelante
Mi si stringe il cuore vedere un ragazzino lavorare con flessibile e fiamma ossidrica indossando ciabatte di gomma...
Excelente trabajo 👌 como nuevas saludos desde México.
Maravilhoso! Parabéns pelo trabalho impecável
Real mechanical technician master!
reconditioned german refridgerator compressors from the 80s become new ones from panasonic 😄 i like it
Рабочий стол великолепен.
Parabéns pelo seu trabalho
Ótimo trabalho, mas acho que deveria usar óculos de proteção, pois o rapaz lixando o resto de solda é muito perigoso espirrar fagulhas e componentes do disco no olho, pode sim ficar cego.( Eu trabalhei muito com lixadeiras em metalúrgica). Brazil 🇧🇷 👍
So many violations of OSHA i cant even begin. Just simple PPE would be a good start. Environment is a little sketchy.
Klo di Indonesia itu compresor di sebut compresor kW, akan tetapi bila bengkel anda ada di Indonesia pasti 100% teknisi" ilmu teknik pasti menyukai anda.👍👍👍👍😁🇮🇩🇮🇩
O trabalho é bom só teria que otimizar mais os espaços tem que descer pra corta desser pra soldar subir pra desoldar os tubos e pintar isso poderia ser feito no mesmo espaço pelo menos as soldas
Também percebi isto além de fadiga do trabalho ainda fadiga de ficar andando para executar o trabalho
Техника безопасности просто на высоте.
Jajaja jajaja
Отличное видео,приятно видеть ребят кто любит свою работу,снимите видео по разбору компрессора от сплит системы,будет отличный вариант.👍👍👍👍👍
Excellent. I my self do business or Fridge aircone and I never thought of repair the compressor . Excellent 👍👍👍👍 for your video
Que cordão de solda maravilhoso
Os equipamentos de segurança passa bem longe daí né , isso é importante para o bom andamento dos serviços! Pense na segurança e mãos a obra.
Isso é na India cara, eles mal sobrevivem com o q ganham.
@@gureidens61 aqui no Brasil não está muito diferente disso.
Esse é o sonho de muitos empresários e de muitos líderes de outros países desenvolvidos, que cada vez tenha mais pobreza no mundo, para eles poderem explorar bastante essa mão de obra.
@@carlosaraujo4400 Sim
Wawww,,,, luar biasa cara mengerjakannya. Terima kasih atas ajarannya, di berkati slalu usahanya.
Yup 👍 Thanks for watching ❤️
I bet the EPA and OSHA love watching stuff like that.
All that we were taught in HVAC class was a lie! You can have grinding dust enter the compressor and then later have them flow to the capillary tube. You can hammer the compressor around. You can flip the compressor over and over again. You can paint and weld with the suction lines open so the paint can enter the shell. You can test run the compressor without any oil in it.
J nự
As while as it works Yes.. LoL
Our compressor is making loud noise like a bike starting noise. But the cooling function is completely okay. The repairers are telling us to change it. Are they lying or telling the truth?
@@takini4918 Compressors are not serviceable on the field. Infact, compressors are not serviceable at all. So the best thing to do would be to replace it, unless the system has been overcharged, has excessive lub oil in it or there is a presence of water in the system. Maybe you could clean the lines, vacuum it, and fill with fresh and correct quantity of oil and refrigerant. If the noise still persists, it's time to change the compressor.
@@SubramaniamLakshminarayanan Compressor is quite expensive. Our fridge is more than 10 years old now...its the third time we had to call repairer. Can you please suggest me the best option? Should I replace the whole fridge or changing the compressor would be the affordable option?
Все элементарно просто ! А выглядит как новый . Молодцы !
только когда холодильник ломается через год и гарантия кончилась ,хозяину не весело
И наклейка в конце Панасоник))) Я просто валяюсь)))
It’s always some dude in sandals working on some old trash by hitting it with a bunch of primitive tools. Bravo.
Kinda clean it, kinda paint it. All done!
No sé en qué país hicieron el video. Ese trabajo lo hacíamos hace 30 años aquí en México. Vendían vielas, pistones, válvulas y embobinamos las bobinas. Así empecé en esto, ahora sólo cambio el compresor por otro nuevo y listo...
En India. A los señores les faltó modificar un de dos compresores para tener uno para pintar. Eso yo hacía hace un tiempo, reparaba compresores de nevera para volverlos de pintura.
@@miguelosgcv Si se utilizan para pintar, aunque no lo recomiendo por que el aire siempre lleva en poco de aceite.saludos ..
Serviço top.parabens.Brazil
Rebuilding is one part, using quality components to rebuild is another thing
GoodEving,,very creative,,newbie is watching
Maravilha ver as pessoas trabalhando, vocês estão de parabéns !
Povo trabalhador .
Цва увы уже фф в цы ц в ц на ц
Restore? Looked more like a questionable cleaning job! 😂
AGREED!!
They didn't do anything except tear it apart, test, and weld it back together. Its still in the same mechanical condition as when it arrived at the shop. Nice paint job though. Oh boy a replacement part worthy of all the labor to tear one out and recharge the system. 3rd WORLD for sure.
@@fredc3543 If you think this is 3rd then you're the most gentrified fool on the planet.
They tore off normal factory paint and painted it with spray!!!
They are yet to add oil on it… Panasonic should sue them for copyrights
так вот он какой - ПАНАСОНИК!!!! двухэтажный гараж.
Amazing Work keep going brother God Bless you
Very goooooood Índia gaes ,shoooow de bola big work may brother. Brasil Rio.
Pakistan👍 🇵🇰❤️👌 not India 👎
Kkkkkkkkkkķkkkkkķm
Типа новый, не битый, не крашеный, и даже Панасоник.😀
I’ll bet you these are three for ones, install three to get one to work. Another video of Pakistan’s finest at work.
Hai Good Evening Super job Whear is the place very hardworking All members Super work ing All seen to Re wand the stater also And Re fill oil also very Expart all Makaniks God bless you and your family Super 👌👌👌👌👍👍🌹❤️
Это лучше и дольше будет работать чем новый
Сколько он интересно проработает с таким образивом в внутри.
Я бы корпус помыл и почистил перед сваркой и мойкой
Wow... !!! My best friend, Great... We liked and enjoyed to the end. Thanks Have a happy day!
Thanks for watching
Hai Good Afternoon Super Super work ing All👍👍👍👍👍👌Super Fishing
Thanks for watching
Bueno, ahora no sabré si cuando compre un compresor será completamente nuevo o reparado.
Los felicito por su trabajo, aquí en mi país también los reconstruyen, no obstante estoy en desacuerdo con agregarle la etiqueta para que piensen que es nuevo, lo veo como un tipo de estafa
Pienso que lo ponen para saber la capacidad del compresor y tipo de refrigerante con el que trabaja.
Es evidente que se ve la soldadura y repintado del compresor y la etiqueta se la ponen para identificar marca y características del mismo
کاملا صحیح میفرمایی.من ایرانیم خوشبختم.پاکستان کشوری پرجمعیت و فقیر است ومجبور هستند تمام کارهایشان را با اندک ابزار خودشان پیش ببرند.عجب دنیای شده دنیای مجازی.با همه زبانه در ارتباطیم خوشحالم ادوین سانچز.شما از کدام کشورید فکر کنم برزیل باشید
Este país é o que mais contribui para o meio ambiente, reciclam quase tudo.
its pakistan 🇵🇰🇵🇰🇵🇰💖💖💖💖
كنا نوضب ونغير الباكن والبستونات لهذي المواطير حق الثلاجات في ورشه عند سوق الاشبط بتعز عام ١٩٩٥ درسنا في الفنيه ايام الصين كنا نلحم كانه وكاله
Руки золотые у ребят !
UM TRABALHO MUITO BEM FEITO
I was very surprised how great that weld came out! For an old arc welder with no real prep work like beveling the edges or cleaning the paint off first that sure came out nice
Thanks for watching
yes, that boy is a skilled welder
The welder had the kerf groove left from the metal cutoff blade that was used to rip the lid off of the compressor. It would have left a perfect trench to fill up with that stick welder rod. They all did pretty damn good work considering the working conditions in the shop. I was only bothered by the fact that the tube ends weren’t completely sealed shut during the metal/ paint grinding process. And then during the stun removal process the way it was brushed by that slag brush could have pushed brazing slag or other debris into the ports before they were sealed up.
Compressor should have had a good vacuum and dry nitrogen charge added for a higher quality product just before pinching off the process tube but I bet these are ultra bargain cheap rework units so cost is the ultimate factor.
Good job though for sure!! Thanks for sharing this OP!
Me too. Didn't get a close look but it did look ok.
if you weld 10 000 compresors and made it as that boy :) Training and calm arm is the key.
참진정하게 수리 잘 하시네요 저렇게 하면 고장 없이 오래 사용할수 있겠네요 잘하시네요 우리도 그전에는 저렇게 수리해서 사용 하였습니다. 잘 봤습니다..
Thanksgiving
Hard work Never fail...
Dust, dust, dust! I did not see him test the weld for pinhole leaks. Maybe the person that buys the compressor tests for leaks? The dust could get washed around inside and eventually end up in the outlet where it could then circulate and clog the capillary tube.
It's a controlled dust free envirorment. Have'nt you heard about it? New tec! And this is not some random welder, who has to check for leaks. Leak check is for costumers
Wow! Didn’t expect to see you in the comment section.
@@electronbolt6550 want it cheap and leak check ✔ is extra
Leak testing is just for a beginners. dust cannot effect the performance of compressor specially when its to small amount.
It actually bugs you to see how much they can do out of nothing....their craftsmanship is beyond any criticism my friend ...imagine what they can do with proper tools....give credit when credit is due ...his welds looked fine
Acá en Argentina directamente te dicen no sirve y tenes que comprar otra heladera, ojalá reparacen acá las cosas así.
Saya sangat menyukai cara kerja anda. Mantaaaap....! 👍👍👍😁🇮🇩🇮🇩
Thank you for the video, success always for "LOGIC CREATION"
Thanks 😊
Keep watching our videos..
@@logiccreations9176 Ok
Excelente todo el trabajo que hacen! Impresionante la habilidad de éstos trabajadores. Lo único que les recomendaría es que deberían usar gafas, guantes y calzado de seguridad.
La India....pide demasiado.
ใช่ ดูแล้วมันน่าอันตราย รักษาดวงตาของคุณไว้ก่อน...!!!!!
Beautifully serviced and restored compressor
Thanks for watching
Saludos, estoy sorprendido de la inteligencia y de su capacidad de resolver todo.
Good as New. Ingeniosos way to repair
Honest work..❤❤🙏🙏Papua New Guinea