How to old damaged Danfoss compressor bring into new life
Vložit
- čas přidán 27. 02. 2023
- Very informational to watch...... How to old damaged Danfoss compressor bring into new life.
In this video you can see the complete reconditioning/restoration process of old damaged Danfoss compressor. 1st time on CZcams complete restoration of Danfoss fridge compressor...
#howtorebuilddanfosscompressor #restorationofcompressor - Jak na to + styl
As a Danish man where Danfoss is from i have big respekt you fix something old just shows Danish quality and ur skills can help the world not make so much waste 👍👍👍👍
Nice, and Greta will thank you for releasing the gas into the atmosphere.
@@herrkulor3771how dare you
These are specialist craftsmen. We should be sending a good amount of waste their way to refurbish and give a second life. They have the time and expertise put it to use.
Clever, but unless I'm missing something - a couple of potential problems with this - wire wheel cleaning the stator around 2:25 without a barrier between the wheel and the enameled windings relies on the operator always being accurate and careful. Variation in technique could easily damage the wires enamel coating and cause unexpected failure or shortening of useful life because of arcing or shorting and the refurbished item has stickers put on it that give the impression it's new not refurbished.
Hard to believe that they weren't shorted from that! Then again it isn't between the windings, only their outside edge, in close contact to nothing but oil.
This how EVERYTHING is in Pakistan. Including their economy, foreign policy and Army.
Smart, but what you dont know is that they have done this in repetition thousands of times. So no, they will not damage the wires on the stator. And then the people buying these already know that those are refurbished compressors and a lot cheaper than the new ones.
@@Tirah5 Just because somebody did thousands of times doesn't mean it's right or safe
The right thing to do would of been to varnish the stator. The cloth binding is loose which can lead to windings also becoming loose and eventually failure.
I had a friend from India at an old job, good guy, hard worker, he used to work on the floor just like this, using his feet like a bench vise and all! Me and a couple coworkers thought we would do something nice for him and so we all pitched in and bought him a used but nice work bench with a vise mounted to it, to our surprise we came in the next day to find him using it, just not the way we would, but hey, he got his work done, and his quality was good, funny as heck but he was squatting on top of the workbench working, just like he would on the floor!
How about that! Old habits die hard, I guess.
Is it possible for someone to come and learn at fee please am interested
I’ll say one thing positive here: for a stick welder that’s an awesome weld bead he laid down! But I’d think a sandblast cabinet would be much more efficient than all that wire brushing.
And a basic paint sprayer pays for itself compared to canned, after a few dozen units are painted.
Even a shitty wet sandblaster might be more useful, since these compressors are welded shut they just have to worry about keeping the ends crimped toght. Safer than a sandblaster since it's wet and doesn't produce dust.
@@firstbloood1 i
Sandblasting, sandpaper or wire brush are out if the question, the abrasive (or just rust) circulating in the sealed system oil will ruin the tolerances in the pistons rapidly. It's a total scam.
gycy
Why on earth would you want to educate-encourage young youtubers to use dangerous power tools with only bare feet and no eye protection ... Totally irresponsible.
you have to commend the effort they make to salvage junk with less than modern tech, I always find it surprising.
what's it matter what kind of tech they use? What do you know about "modern" tech anyway?
Everything they're using is still modern. Nobody in industry uses cordless gizmos for line work like this.
Machine shop. Electrician, welder, HVAC plenty skills combined
Yes, here in America, these end up in landfills. We could learn a lesson or two from these industrious guys.
They are sold at a much lower price as compared to new units. People purchasing these units know the difference. The same shop usually sells original, remanufactured and Chinese and customer picks based on price and his preference.
Yeah lots of western ppl have a hard time understanding less deveoped populations. Like Cuba cut off for decades people do what they have too to survive. If that means bying a maybe sketchy refurb compressor at lower price so these sellers are reating to the market.
Where is their location
Superb work. I like that this helps to keep the recycle process going rather than dumping them in a landfill. Always recycle whenever you can!
To bad they probaly just let the gas out in he atmosphere, wich is very damaging... so it would probably be better if they wouldnt salvage.
@@onemilliondollar you have to look at the brighter side of things; Even with our atmosphere completely destroyed, our houses will be nice and cool. 🤔😳🤣🤣🤣
Gracias por demostrar lo prácticos que uds son...
Y nos enseñan a trabajar aún en la incomodidad.
Saludos desde la provincia de Salta Argentina.😅
Thank you so much… ❤️❤️
Keep watching our channel
Papá , esos motorcitos nos hacen ganar 40 lucas limpias en un cambio de MC en Argentina 2023
@@logiccreations9176 ye compressor repair shop ka address 🙏plzz yr
@@leoquiroga27 ya ves Facu...hay que ser agradecido...
En USA los compresores así ya se tiran.Pero en Algunos Paises que no tan facil se puede obtener .....se recondicionan.Un trabajo profesional.Felicitaciones.
لان اسعارها مرتفع جدا
غير عمليات النصب والاحتيال من قبل عامل الصيانه
As someone watching from the US
• Watching your videos is most relaxing even at 2 x speed. Hope your customers appreciate the skill talent and dedication of your workers for this very important job for the community
• It’s good to see how well you understand the process of compressor remanufacturing to get the job done efficiently - loads of experience is evident with this skilled set of workers
• Watching your people doing a great job make me think there is hope for the other parts of society who don't even try to have a job. Your crew is a great role model for all of us
• Thanks so very much for posting and sharing!
All the best and God Bless. 🇺🇸
Wow. WHAT'S THE HACK. this restoration is so perfect. Extraordinary. good work.
Excellent 👍
We need like this professional... anybody there..?
Many many thanks😍
and make a parts washer with a filter in it and you will have much better results with the coils, I see you are getting dirt into the coils when you brush clean it. If they are partially degraded, you will easily see this, just put it on a megger, and it might be much worse after cleaning because you introduced near shorts into the windings. If you had clean water from a parts washer going on those coils with a brush it would greatly reduce the inclusions amount. It does not need high flow, you can built one with any small pump. I bet you could use a DIY sand/rock filter and some gravity traps for 90% less fouling of a real filter (pre filter). And flush those crimps with a alcohol spray and then silicone oil (very small amount)
You are assuming these cavemen know what a megger is. Lol!
Original quality is very good that allows successful restoration.
Pakistan has so much talent. These are some very talented people, earning an honest living through hard work. 👍
Thanks 😊
Im from Pakistan I m amazed mostly viewers are not from Pakistan on this video but the video was from Pakistan i think its a great content to make great money from youtube good luck brothers.
You studied in Madarasa?
good to see them using safety flip flops =)
نہیں ہے ناامید اقبالؔ اپنی کشت ویراں سے
ذرا نم ہو تو یہ مٹی بہت زرخیز ہے ساقی
ماشاء االلہ تبارک اللہ ۔۔۔🙏🙏👍👍🌹🌹💐💐🏵️🏵️🌷🌷🌺🌺
Pretty sure even Danfoss would be proud of this! Greetings from Denmark where Danfoss is from and we love to reuse and recycle stuff
But after repairing/ refurbishing he can use the sticker 'Pakfoss'.
@@raufjaleel8317 Or Pakrefoss
@@mnp3713 you mean Pak(re)foss.😄
Proud of that counterfeit operation? You are naive.
Using a wire wheel on the coil windings stripped them of their urethane coating and packed them full of debris which will cause them to prematurely fail. Also, they applied a "tested okay" label without actually testing the unit.
They did a pressure test, it went OK.
@@defenda1he used his finger bruh 🤨
مشاالله پرچم کشورتون پایدار و بالا⚘⚘من از ایران با کمال میل و افتخار مهندسین محترم را لایک میکنم❤❤❤❤❤👏👏
Richtig sauber machen, wieder gut verschweißen und neue Farbe geben und schon funktioniert der Kompresser wieder tadellos. Hier in Deutschland wären die Reparaturkosten höher als ein neuer Kompressor, leider. Viel Erfolg bei Ihrer Arbeit und bleiben sie alle Gesund.👍👍👍
Naja, ein paar Dichtungen hat er ja auch erneuert und die Dichtflächen mit einem Stein abgezogen.
Muy buen trabajo.
Como nuevo quedo.
Sigan asi.
Hai Good morning Super Cutting Assableing spray pant ing Super work ing Avery things cheaking welding All Super ❤ whear this Shop in India God bless you ❤
Love from Hyderabad, India.
Maybe we can leqrn from them and repair some of our broken stuff instead of throwing it away. Great job, nicelly done.
Yes we can
Aí pra soldar corretamente teria que jogar nitrogênio dentro do compressor , deixar ele passando por dentro e aí solda sem contaminar o sistema , mas o vídeo é muito bom
Откуда у них азот , если даже краскопульта нету - баллончиком красят .
افضل عملية استرجاع الضاغط
تهانينا لكم عمل ممتاز 👌🏻
This is informative to see the internals of a compressor in order to understand there is a point it can be repaired other than replacing it. But making it pretty doesnt rebuild it, i could only see cleaning the rust as one aspect and there must be an easier way such as a soak such as in vinegar to dissolve the rust and the only other thing was replacing the reed check valve and gaskets which i think is the point of the repair. The case could have been sand blasted before assembly, i think they could improve their procedure to save time and also prevent the sand paper grit from getting into the piston/cyl ruining it after some unsuspecting person puts it in a freezer. 1. dont use sandpaper or wire wheel at all, use a soak to clean the rust. 2. Replace the check valves on all units regardless. 3. Test then assemble and test again then paint.
Danfoss used to have a plant in Mjölby Sweden the town close to me and my buddy used to work for them
Не бит, не крашен )
you made the world a little better not buying a new one but fixing the old ones
"YES SIR, it's brand new....see the sticker?"
Awesome with almost no tools. Not sure about the bare feet next to power tools. 😮 In the UK here health and safety would have a heart attack lol but fantastic work
He is wearing protective slippers with metal soles
In UK you have thousands of these gentlemen making food with no regard for hygene, doesn't seem that health dep gives a damn
and I highly recommend investing in a viscous brush on paint stripper (modern ethyl benzene based, not methylene chloride) to get rid of the surface paint. No dust, it comes off like wet pan drippings from a roast pan that has been soaked in soap. If you work with it in a shaded out door area (direct sun will evaproate it, you can probobly mist it with water too to keep it cold on a hot day) it will not only be cleaner but also faster then trying to brush the paint off. Recommend 1 pair heavy rubber gloves when stripping (you don't need the dexterity, the thin gloves are pointless and they degrade fast and cost money). Try it and tell me how your boogers look like, they should go from grey-black snot to clean snot when you blow your nose after doing the same job. Whenever I did abrasive paint stripping my boogers came out black and I felt choked up
Lol I don't think they care to ever do it right. They just want to harvest that money.
@@LuxAudio389 Faster working means more money
oh yeah? well I highly recommend this dude buy some shoes 🤨
Amazing work. Really good job. Thats true recycling
I most liked the eye protection and the gloves to protect the skin from the cleaning liquid and the UV load from the welding
Great point!
Excelente felicitaciones que profesionales son ustedes 👍
Melhor que de fábrica 😂😂😂. Brincadeira fora parte parabéns pelo belíssimo trabalho
Danfrosssssss kkkkk
may these gentlemen live and prosper for all time.
Well, these guys will probably live longer than the ones making lead plates for lead-acid batteries, those videos are always a huge yikes for me.
Well maybe not the guy huffing spray paint fumes everyday.
Hard working Pakistani brothers ❤❤❤❤ Love from Kolkata, India . Two divided Vietnams now united , two divided Germany now united. We the divided Great India, now India, Pakistan and Bangladesh will be united near future. Evil British divided us, we will teach westerners a good lession near future. We are all brothers of Great Bharat, that was India. Love and Salam our Pakistani brothers. Jay Hind. Jay our beloved Great Netaji Subhash Chandra Bose.
very nice Work
Thanks for the visit
Qué personas tan industriosas, inteligentes, organizadas y trabajadoras, para ellos todos mis respetos y admiración. Saludos desde México.
Digo o mesmo! Saludos desde Brasil. ❤
Vaya otro saludo fraterno desde México.@@irama6964
Parabéns! Belíssimo trabalho!
Thanks for watching
this guy very expert in this field
Outstanding rebuild and workmanship
Excelente trabalho!!!! Parabéns
Thanks for watching 😍😍
السلام عليكم كان العراق في زمن الحصار الامريكي على العراق يستخدم إعادة الظواغط إلى العمل من جديد تحية من العراق الى باكستان بلدي المسلم الجميل
جزاک اللّٰہ❤️
Hola ...vuelvo a felicitarlos por su trabajo, y entrega de información visual....de "EL COMO LO HACEN ".
Saludos ahora desde Santa Cruz de la Sierra.Bolivia
Excellent Bhai 😎😎
O trabalho que essas pessoas fazem é incrível, restaurando e recuperando máquinas que ficam como novas.
So
8:37
Muito bem restaurado perfeito parabéns
Sim! E de marcas conceituada
because I took a break from restoring some electronics and I had to polish a few contacts (maybe 1 hour on the dremel over two days with abraisive rubber media) and on day 3 my nose feels like crap and my snot is black. And I even do a pre-clean with ultrasonic, and these are just small ring terminal crimps I am cleaning up. If you take a break from dust for a while and come back to it you REALLY notice it. I am investing in getting rid of dust (precision mechanical bolt cutter to reduce amount of grinding, deburring tools to reduce amount of grinding, and electrolysis to reduce amount of grinding). You guys got enough sand there from the deserts and stuff lol
Knowledge for public....Jai Bhagwan Bhole Nath
Замечательно!!! Отличная работа!!!
Saglasna
Отличная работа чего??? В изготовление контрофакта???
@@Hatori88100 И эту хуету потом нам же и поставляют. Называется - "восстановленные агрегаты".
@@Hatori88100 that's right😂. The nicest part of this repair was probably the paint job & danfoss stickers.
Great work. Our "throw away" society should learn from this. However, repair work is charged out at $100 per hour, it wouldn't be worth it.
Thanks for watching
So how should it learn?
Keren keren barang bekas jadi baru lagi top 👍👍👍👍
Genios exelente trabajo !!! Impecable restauracion !
Isso que eu chamo de reciclagem
Trabalho profissional, equipe toda de parabéns pela recuperação e reciclagem.
Respect Pakistan engineering..all skill tiptop
It will be sold as BRAND NEW
Nota 10 sem comentários Excelente recondicionamento
Thanks for the visit
😂
That's a quality refurbished part.
Thanks 😍
son artistas en el anonimato! unos verdaderos genios!
they even buff the tubings point opened..what would you think is there no any small particles entered to it that will damage the piston?
They are working on a dirt floor in sandals and spraying paint and solvent everywhere. Hardly a cleanroom
😢 as long time employee of Secop, formerly Danfoss, it is not nice too see as they even selling these with "original" labels.
Keeping another compressor out of the landfill and keeping people employed in meaningfully work is good. A few micron of extra dust in the compressor who cares it will still run fine for years
@@edwardtsang3243 Right on the spot. And because China factories are %100 defect free LOL
it's a scam, even if this compressor had any life in it, which I doubt (given the amount of rust it probably sat unsealed for months) it is ruined now, with all the abrasive dust in.
Amazing work
Thanks a lot 😊
@@logiccreations9176 contact dena brother aapna
Repair is the need of the hour to fight global warming. Every country should have such a workforce which can literally repair and restore machines to the new.
Very nice work
Serviço perfeito parabéns
1:38 safety sandals are not optional here. You do not want to slip & grind off your skin ALWAYS wear sandals.
great skills
For those saying: "You should always recycle", you recycle only if the ROI is inline with your market. New items demand more resources be brought into the life cycle of the marketplace (mining, refining, etc). For those that say "it is too cheap quality compared to new": You have to look at the cost dynamics of your marketplace.
“Tested with the highest of standards” 😂
Parabéns muito bom
Thanksgiving ❤️❤️❤️
Снимите видео по разбору компрессора от сплит системы,полный разбор включая как вытащить обмотку из еего,все отличное видео, респект
Very impressive and a positive statement for repair and reuse!
Thank you!
Dirty hands is the sign of clean money..
Что? Компрессор ломается раньше чем холодильник? Такого не бывает. 😂
This is exactly how they prepare food too, fascinating.
Gran trabajo...saludos desde Peru..
Так вот как делают настоящие компессоры Данфосс. Хотя может быть он и был Данфосс...
😂 LOL
Это же печально, вот почему новые компрессоры работают не долго
@@NkRemTeh мля они для себя на ремонт делают.или ты думаешь они на конвеер в развитые страны их поставляют?))
Новые комперсоры делают из бумаги и алюминиевых обмоток , на всем экономия , старые компрессоры по 60 лет работали ...
I thoroughly enjoyed this restoration--my question is (1) how good and (2) how reliable are these rebuilt compressors. Evidently they are restored manually and their performance on an actual refrigerator has not been tested. I did not see the compressor piston rings being replaced nor any other true engineering testing performed. But apart from that the people seemed quite skilled in "hands-on" work.
These have no piston rings, piston is a clearance fit
Ĺ
Polishing a terd. Did thy even flush it out?!?😅😂😅😂😅😂😅😂😅
Eles são muito bons na solda de eletrodo👏🏼👏🏼👏🏼
Very impressive and a positive statement for repair and service TQ so much bro
false.
Gostei os cara são muito bons parabéns
Thanks for watching 😍❤️
And a 30 second warranty.
Мусор.
worse, it will also contaminate your coolant loop with counterfeit oil and debris, you will be out of new coolant, new filter-dryer and installation expenses. And you will still need a compressor, another filter-dryer and another coolant refill (a new fridge will be cheaper at this point).
La verda excelente trabajo ❤❤❤
The dude is using a work bench that’s a big improvement.
Молодцы!!!! И в Россию на новых холодильниках эти компрессора уйдут. Как за новые сойдут!!! А потом удивляемся почему холодильники не служат?
Так и есть. Нам и "новые" агрегаты/запчасти, отдельно, будут поставлять, как выше написАл. "Восстановленные агрегаты/запасные части".
@@user-in3hv6ks2l У меня холодильник Днепр 3 1967 года до сих пор работает без всяких ремонтов. Гарантийная Советская пломба на компрессоре отгнила уже))))
@@user-fe2ep5tl6y , да верю! Все десятилетиями работало. Все делали сами. А сейчас, к сожалению - нет.
Вот оттуда этот мусор везут как новый.
@@user-fe2ep5tl6y так то Украинцы делали.
What if the winding are shorted, do you still repair it?
it can be rewired too
And that just went in to my brand new samsung refrigerator, great
Compressor koi bolega he nahi k repair keya hua hai masha allha bhuat acha kam hai aap saf hai
Did they just reconditioned an old unit to sell as a new unit? 😂
I was always right about ‘ some guy on the floor of a dirt ruined house building and packaging items , parts like this and selling them on …….bay😮
I would trust it any day over a new one made in china. At least it's probably decent quality metal.
@@joemelton81 😂😂
Очень много лишней работы. Надо сразу красить 😂
Yes I live in a very humid place. Parts rust immediately if they are not painted.
Now i know why a new compressor fault through one week.
😂
😂😂😂
If you are buying a refurbished one, but not new! In this specific case, the work was well made!
It is simple: refurbished with a new brand seal.
@antoniobragancamartins3165 2.27 - 2.35 повредил лак на проводе. Изоляцию
Bhut Vadia,,,
Thanks for watching
Pak is a great country for refurbished products.
Yup…. Thanks from Pakistani brothers❤️
@@logiccreations9176 In fact in India bigger Companies who make brand new products or market imported products out of fear of incurring heavy losses to their businesses have shut down shops of many small and micro industries who make refurbished products like Inverter Batteries,compressors, and other consumer and industrial products. Now the consumer has no option but to throw away the old one nor anyone wud repair it and had to purchase new product putting lot of money
If you wondered why your refrigerator only lasted two years 😂
It’s lasted over a decade actually, thanks my Asian brethren ❤
The only thing that’s lasted for two seconds is you, your boyfriend will confirm that. 😂
real mechanics. The compressor looks better than the original.
😅ققسش