[DIY] Making a Checkering Tool. / チェッカリングツールを自作してみた
Vložit
- čas přidán 11. 06. 2022
- Thank for watching.
I made a checkering tool.
Checkering tools are not in demand in Japan and are difficult to obtain, so I made my own.
Since I am a beginner in welding, the quality is not high, but it is a product that can be used sufficiently.
日本では需要がないのか入手困難なので、自作してみました。
私はロウ付けは初心者なのでクオリティは高くありませんが、何とか使えるモノには仕上がりました。
問題は、これを何に使うかです、、、
#woodworking #handtool #手作業 #木工 #工具 #道具 - Jak na to + styl
I love to watch people make their own tools and use them to good effect.
Thank you for sharing your joy with us.
Great video, thanks. A useful tip for the future; solder flows towards the heat, so point the heat at the object you want to solder, not at the blob of solder.
Funny. I came here to find how a tool could be made for cleaning up guitar bridge slots and the opening music is slide guitar blues))) Thanks for the episode
Never stop , you're an inspiration to those who feel things may be out of reach. truly a quality channel- and the most respected my time has felt in a while.
Thank you very much.
After reading your comment, I want to start working again.
That is a great gun checkering tool.
Very hard to master. Well made too
Thank you so much.
Thank you for the step by step commentary on technique, tools used, types of steel etc. very informative
Thank you, too.
Your comments have been a great motivation for me.
This would all seem to be a complete waste of time as the cutting head will be annealed after heating up , after just a few lines cut in Walnut they will be blunt, the cutter head must be very hard to be of any use.And there do not appear to be any teeth left on the cutter head?
Thank you for watching the video.
I understand what you are saying, but I have made several grips with this.
Thank you so much for sharing 46 CW San, I’m very curious about the steel blade you’re using, because steel has so many numbers and quality’s
🏆PERFECTION🕊
Thank you.
Great work. We shared this video our homemade tools forum this week 😎
Thank you so much.
Brother you forgot to show the teeth of the tool
Me ha pasado lo mismo. Es lo más fundamental.
He was using a file. Files cut wood, he braised two onto a piece of steel parallel, and thus cut the wood…………….!
Hola buena demostracion de quecon pocas cosas se pueden hacer cosas buenes y utiles como eso que sería genial para ( segrinar ) culatas de armas 👌👍 🤝 desde Castilla y León España
thanks!!!
Personally I would use a cut off wheel on a rotary tool or angle grinder to do all the metal cutting, and a grinding wheel to shape the sides of the file - but that's me.
Nice. I wonder what would happen if you tried to do the same on diamond files.
Неужели нельзя зажать 10 см.в тиски ? Аш 3 струбцины привлек
Perfeitas
Thank you.
You just blew the temper
Thank you for watching.
Обтачивал и пилил калёный надфиль, а при пайке сделал ему отпуск😂.
мудак он японский .время потерял
solder travels to the heat
try heating in the mid next time
only if u use flux ...he burned it all away before he even had the cutter part in place
a piss poor attempt at soldering
Why cut the one inch wide to get a quarter inch and not just buy it at a quarter inch wide 😂😂😂😂this guy is a tool
Como se llama la herramienta
こちら販売はしてますか?もしくは作って頂くことできますか?
ご視聴いただきありがとうございます。
この作品は素人の手作りですので、とても販売できるようなクオリティではありません。
また、もう一度同じものを作っても必ず上手くいくとは限りませんので、受注もいたしかねます。
ただ、チェッカーの入れ方、あるいはご自分で作られる方の参考になればと動画を公開しました。
お役に立てず申し訳ありません。
👍👍👍👍
Thank you.
To much work, i do very easy
Not everything is about easy or not. Actually not very much is...
wow aring
Thank you.
I am assuming the teeth are the saved file teeth...
Hard way to make a checkering tool
Излишнее количество обрезков и пропилов. Это можно реализовать проще и быстрее.
😎💯👍
What is that used for?
Used to carve checkerboard grooves into the non-slip of wooden grips.
I'm editing a new video with this right now. It's a bit of a playful piece, but I hope you'll take a look at it.
Thank you.
@@46craftworks you did a great job on it beautiful piece of work thank you. I look forward to watching your video
Делают насечку на ружейных ложах прикладах цевьях рукояток ножей и тд... и тп... Кто на что горазд! Как то так!!! Называется чекеринг!!!
Very handy idea that can have lots of great uses and can also be great in the medical area for people with poor grip for holding things. You could start your own business in buying cooking items and other things around the home and carve checkerboard grooves on to them and sell them online. You could even advertise through hospitals, physiotherapy offices and with doctors and clinics giving them all a link to your online contact so they can pass it on to patients who might need these for home care. You could even contact medical equipment suppliers that have their own online shops and offer to your ideas to them so they can order as required. Great idea lovely job
@@billyblackie9417 вот если ещё и с переводом я может и понял,а так всё равно благодарю!!!🐷
Научись держать молоток
👍👍🌹
👉💯👍
7/10
Do it single??? With only one teeth
This is a double tooth.
Carve parallel lines.
Чушь полная!
Клеит широкую рейку, а после пилит по всей длине с двух сторон. Горе мастер.
A complete waste of time and tools. A much more eficient can be made with an old screwdriver, a torch and a good slim file. And saving the file BTW.😅
какае же хрень
Odavno nisam video, na jednom mestu, toliku količinu gluposti.
Hvala na gledanju.