Installing Drainage Lines for Efficient Water Flow and Plumbing System|| Drainage System
Vložit
- čas přidán 24. 06. 2019
- Installing drainage lines is crucial for effective wastewater management in your plumbing system. Here's a detailed guide to help you through the installation process:
*Materials You'll Need:*
- PVC pipes (appropriate diameter)
- PVC fittings (elbows, couplings, tees, etc.)
- Pipe hangers or straps
- Drainage slope guide (optional)
- Measuring tape
- Level
- Pipe cutter
- PVC primer and cement
- Screwdriver or wrench
- Safety gloves and goggles
- Caulk (for sealing)
- Gravel or aggregate (for trench)
- Shovel (for trench digging)
*Installation Steps:*
1. *Plan the Layout:*
- Determine the drainage path and layout for your system.
- Identify the locations of drains, fixtures, and main sewer or septic line connections.
2. *Calculate Drainage Slope (if needed):*
- Determine the required slope for your drainage lines. Typically, a slope of 1/4 inch per foot is recommended.
3. *Dig Trenches:*
- Use a shovel to dig trenches for the drainage lines following the planned layout.
- Ensure proper depth and slope along the trench.
4. *Add Gravel (if needed):*
- Place a layer of gravel or aggregate at the bottom of the trench to facilitate water drainage.
5. *Cut and Assemble Pipes:*
- Use a pipe cutter to cut PVC pipes to the required lengths.
- Assemble the pipes using appropriate fittings like elbows, couplings, and tees.
- Dry-fit the pipes and fittings to ensure proper alignment before gluing.
6. *Glue Joints:*
- Apply PVC primer to the pipe ends and inside the fittings.
- Apply PVC cement to the primed areas and quickly assemble the pipes and fittings, ensuring they are fully seated.
- Hold the joints in place for a few seconds to allow the glue to set.
7. *Secure Pipes:*
- Use pipe hangers or straps to secure the pipes at regular intervals, especially where there's a change in direction.
8. *Connect Fixtures:*
- Connect drainage pipes to sinks, toilets, showers, and other fixtures using appropriate fittings.
- Follow the manufacturer's guidelines for proper connections.
9. *Test the System:*
- Run water through the system to check for leaks, proper flow, and drainage.
10. *Inspect and Adjust:*
- Check all joints, connections, and slopes. Adjust as needed to ensure proper drainage.
11. *Backfill Trenches:*
- Carefully backfill the trenches with soil, ensuring not to disturb or damage the pipes.
12. *Sealing (if needed):*
- Seal any gaps or openings where the pipes exit the building to prevent pests or debris from entering.
13. *Final Inspection:*
- Verify that all pipes are properly connected and securely fastened.
14. *Educate Users:*
- Provide instructions on maintaining the drainage system and avoiding practices that could lead to clogs.
Remember that local building codes and regulations may dictate certain aspects of your drainage system installation. If you're not experienced with plumbing work, consider consulting a professional plumber to ensure a proper and compliant installation.
Congrats on the video!!!👍👏
Thank you
We are PVC CEMENT manufacturers, it feels nice to see how our product is based for jointing pipes ❤
Thank you
Dear Nitin, please guid me how to remove these pvc cements from clothes?????
use proper pipe cutter not hacksaw. also clean the burr after cutting. In long run debris will accumulate at joints and create blocks.
And also rotate the pipe in the fitting. A little bit of pipe and fitting sanding would help
*"Nice work!"*
Good work done ❤
Thank you
Your video are great. Thanks
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
🤣🤣🤣🤣🤣🤣
used a reducer at 4.43 then fitted pipe externally ,blockage waiting to happen.
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Well done great job
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
Nice
وا اوئے۔۔۔۔۔👏👊🤙💪💪💪
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
Недопустимо уменьшение диаметра сливной трубы - там будут образовываться засоры. При подключении белой сливной к тройнику явное заужение.
Thank you
@@learnpassearnprofessional7467 What "Thank you". You do it wrong! Like the most indians.
@@learnpassearnprofessional7467 t4oubtm8ovxy
rv6 m xr cuncmo
Totalny prymityw !
Dzikusy !
Thank you
Hmmm. I'm seeing several code violations in the U.S. compared to where ever this video is taken. Plus plastic pipe fittings should be primed, glued and installed with 1/4 turn.
Thank you
you cant use 90º fittings. only 45+45
You think that's going to be inspected?
Why cant putt 90 ° fittings?
Nice video
Use T.Y for drain
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
why no proper cleaning or use of primer before applying pipe solvent?
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Nice 💯
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
Wow. Old fashioned. What kind of system? Why for gluing and not like european pipe system from vavin.
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Good work done
Thank you
Yah Nani trap ka Patla wala hall kitne inch ka hai
Gotta love the sandels lets go to work at a job site in pajamas
Does that really say professional in the title? I like to give a fitting a little twist back and forth as it goes in and then wipe off the excess. Primer???
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Please check my page
You suppose to put a 50mm where you put kolar although it's not high pressure job well done
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
Nice safety shoes! 😂
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
OSHA India approved.
Nac video ❤
Thanks!
I wonder if the building inspector passed his handy work!!! some how I don't think so...
Thank you so much for your comments. Please share our videos to your friends and country. Like us, comment us and subscribe to our channel.
Where they are i don't think there are inspectors. Did you see his workboots? 😅
Wat do we call dat stuff with a something like a reduser ??
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
Don't know why did this System exist? Easier is the german/european KG pipe System. Look in the Net.
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Prone to clog, your do it yourself reducer is wrong, will eventually build up debris and clog.
First cleaning fittings
Anah shuokol hada hena Saudi Sabak
Thank you
Using small size pipe. Will block after some time. Better to use not less than 4" Pipe
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
Already Rong pipe socket opore level nose up down nose showman thake opore up down hobe
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Plumbing and gas fitting technology
Thank you
Seems like a snake out nightmare
Nice installation
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
🤣🤣🤣🤣🤣🤣🤣
I AM ALSO USING TAPARIA SPIRIT LEVEL
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Это трындец, племя дал"""ов самое распространённое в мире
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
IT SUPPOSE TO BE A WYE INSTEAD OF THE TEE.
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
4" Drainege C P V C pipeline Drainege ACID Metiriyal Use CPVC 4"
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Safety sandals?
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Wow just wow. I see some Arabic writing on the waterproof rolls and I hope this is not in my country. However, this should be a video on how not to do plumbing work. 😏
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Excuse me! WHY you'll ain't explain more, instead of showing fittings!. I'm a first time doing this and I have no clue on what you all are doing...
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
90 degree short fitting on a horizontal???? And you wonder why they end up crapping in the street...
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
yh as u tell there should be two of 45° ,also thats helping for the laying
A Straight T going into that soil pipe 🙄
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
almost everything is wrong
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
This Wark is rong
Should of used 45 at the end
I like it
Y use Karo bhai
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
Plumbing and electrical work in India is probably the worst I have seen.
Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺
Hello, do you have any companies like this, who is looking for a job with a large and well-known business to gain valuable experience and rich work experience
This is wrong process. Atfirst female then male use solvent.alwsys use single y
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
That level was falling back
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
Check the bubble before posting the video. Just a bit of advice from a fellow traveler .
Thank you
Yeh hah cowboys
Thank you
Kisu bulna chaya
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Good
😀😀 Thanks dear for your comments. Please share our video to your friends and country. Like us comment us and subscribe us
completly wrong fitting!
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
y ti
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
english pipe wa
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
آپ سمجھاتے بھی جاؤ باتھروم کا فٹنگ تو سمجھ آرہا ہے لیکن یہ پائپ کس چیز کا ہے نکال کا یا کچھ اور
Thank you
The "Straight Tee" you used is very wrong! The best fitting should be "Y-branch". And even "swerve Tee" will be far better than the "S!traight Tee" This is a wrong work done ✔!!!!!!
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
bad work you are Wrong work there is put ( y tee .... do not put tee throw
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Magsalita k nmn
Slope
Thank you
I’m pretty sure your supposed to be using primer. Not real efficient
Thank you
Worst plumbing job ever. I would report you to your union rep, simple as that.
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
🎉🎉🎉🎉🎉🎉❤❤❤❤❤ good very Good 👍
Thank you
Bhai apna number send kro
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Bhai apna number send kroge please
Thank you