10 tips & tricks for the Tilta Advanced Ring Grip for DJI RS 2
Vložit
- čas přidán 2. 08. 2024
- Let's talk some about some import stuff. Like, how it is with the easyrig, how to wirelessly record with Komodo, broken handles, the best settings for RS2, best mode for RS 2, how to power everything by D-tap, best cheap BP-955 batteries for Komodo, Tilta basic ring grip vs.Tilta Advanced ring grip and what cables you need to run this setup.
Footage graded using my LUT pack & grain samples:
sellfy.com/peterbaerveldt/p/c...
Timecode:
00:00 - intro
00:43 - broken handles
02:43 - start/stop nucleus N with komodo
04:27 - setup build & power
05:32 -D-tap splitter
06:57 - best v-mount options
08:35 - Jupio proline BP-955 for komodo
09:24 - auto shutdown handles
09:49 - Easy rig
11:02 - perfect balance with easyrig
12:58 - best shooting mode on DJI RS 2
13:40 - Best stiffness settings on RS2
14:11 - Basic ring vs. advanced ring
15:18 - outro
Information about the ring grip:
The Advanced Ring Grip for RS 2 allows you more flexibility when powering your gimbal, mounting accessories, controlling wireless follow focus motors and operating the gimbal body.
The system allows you to power the RS 2 with either a Gold Mount Battery, V-Mount Battery, or the RS 2’s Battery Handle. The Advanced ring Grip allows you to mount the RS 2’s Battery Handle to the top of the ring which doubles as a power source and top handle. This can be used in combination with a Gold or V-Mount Battery Plate, which gives you more flexibility and longer battery life on set.
The Right Side Control Handle allows you to control the movement of the Gimbal Head and offers camera control through the RS 2’s camera control ports. A single finger wheel allows you to control a DJI Focus Motor or our Tilta Nucleus M and Nano.
The Left Side Focus Handle offers the same wireless follow focus capabilities, but with two finger wheels, allowing for simultaneous control of Focus, Iris, Zoom, and the Gimbal Head, all with only a single operator.
The system allows for further stability when operating the RS 2 and the included kickstands allow you to set the gimbal down after long takes.
The Advanced Ring Grip does not include a battery plate and the compatible battery plates are currently not available for purchase separately. The Ring Grip does include an adapter for the RS2’s Battery Handle that allows it to function as a Top Handle for the Ring and provide power to the gimbal.
FOLLOW ME:
Instagram: / whiteravenproductions
Vimeo: vimeo.com/whiteravenproduction
Facebook: / whiteravenproduction
Website: www.whiteravenproductions.nl
For sponsorship, product reviews, and collaboration, you can email me here: contact.socials@whiteravenproductions.nl - Krátké a kreslené filmy
My left ear really enjoyed this!
First time using a new mic setup (dual channel Mono) and didn't realise it changed my mix in Resolve. Won't happen next time ;)
Great, I've always waited for someone to use the Tilta-Rig with the Easy-Rig. The question of where the bracket can be attached has now been answered. Thank you so much!
Glad to be of help! I was quite happy with the fact that it actually works. It does make a more convenient setup I feel like.
Hello, thanks for the mention in the video.
It's possible to raise the MiniMax arm by unscrewing the four knobs in the back a couple of turns then pushing the arm upwards so it's flush with the bottom of the power pack.
This way you'll gain about 10 centimeters in height which is good when you want shots a bit higher up.
Have a nice day.
Interesting, is it possible to lower the arm by more than what's possible out of the box?
@@mjscpr Hi, no the arms is at the lowest setting out of the box.
@@easyrig Thanks!
My left ear enjoyed this.
First time using a new mic setup (dual channel Mono) and didn't realise it changed my mix in Resolve. Won't happen next time ;)
@@PeterBaerveldt you didnt listen to your timeline? you didnt see the volume levels on in resolve?
Great video, been wanting to see this rig in action!
Great to hear! Glad to help man!
this video dropped on my birthday!!! WHAT A GIFT basketfull of information!
Glad to hear that man!
Really nice.. was looking for a video on using with an Ezrig.. smashed it!
Glad I could help!
Amazing job, very informative, thanks.
thanks man!
Can you adjust the sensitivity on the focus wheel grip? Some stills lenses have no focus throw
Sound in mono left... be careful. Thank you very much for your really good video!
Thank you for the video it helps out a lot!
Glad to hear that! :)
Hey Peter, I asked the same question over on your RS3/Advanced Ring Grip video but trying to get info for a shoot happening today.
I am trying to get my DJI focus motor to work on this exact setup. (RS3/Advanced Ring Grip) I have the toggle on joystick handle set to "df" (dji focus motor). When switched to "tf" my Tilta Nucleus Focus motor works perfectly and is controlled by other handle with focus thumb wheels, but when toggled to "df" I can't get my DJI focus motor engage or work. Any idea? Does the other handle with 2 spin wheels need to be completely off and only the joystick handle on to make it work?
My left ear enjoyed this video :P
Great video! I feel like the cable tension on the ring will affect walking shots or does it?
nice setup man!
Thanks man! Appreciate that
The cable for the record trigger is 4 pins? Or what the name of the side that connect to the camera
How can I pare my nucleus nano to the ronin rs3 pro?
nice video peter!
Thank you! Glad to hear that
How do I get both motors working ?
how can i get the easy rig more tight to my body and back ?
Tijdje geleden besteld, hopelijk binnen 2 maanden binnen. CAn’t wait!
Hoop het ook voor je man! Mooi ding. Wachttijd is onacceptabel lang maar de ring doet in elk geval wel wat ons belooft is.
Hey Peter, I got also a problem with the button to record. Sometime it works, sometime it didn't... Is it only possible to start the record with the other handle if you have a Komodo ? I tried it a lot but my camera (canon r5) won't start recording with the left handle. Do you have any other idea ? Thanks for your help.
Hi and hello from Hamburg. Thank you for your great videos, keep it up!!!! I now also have a ring grip advanced and apparently I have a problem. maybe you can help me. I plugged in the rs2 battery handle at the top and a vmount battery at the bottom. Everything works too. However, the Ronin's battery grip will fully discharge within 1.5 hours. Is that normal? Do you have to adjust something somewhere? vg marco
Peter this is a great video. Is the the v-lock plate included with this bundle or do you have to buy it separately? I intend to use our canon c300 mk3 with this advanced grip and I love powering the canon c300mk3 with a vlock battery since it is the much easier to calibrate that camera on the dji rs2.
Well, it's unfortunately not included. I also had to buy the plate separate.
How do you keep it from Frying your Ronin? I've read reviews after I purchased and I'm thinking to return the device
Great Video, cant wait to get my ring grip, still in shipping! My setup will be with ninja v+ and canon r5
Damn, sounds good! Ninja V+ should be able to output 8k with the R5 right?
@@PeterBaerveldt yes and hopefully soon 4k pro res raw aswell, atomos marketet that with in combination with r5 and ninja v+
@@platanofilms2729 sounds good! Goodluck with the setup💪🔥
What is the rig system? You said it's Ready Rig? I can't find this model on their site
GREAT CONTENT
Thanks! Appreciatie that a lot
thank you very much!!!! watching from zimbabwe
Glad you liked it man! Appreciate the international support🔥
@@PeterBaerveldt keep making content ,,,we loving it!!
We’ll keep em coming💪
Hey Peter! Awesome vid. Just one note, sending your video signal through your monitor then to your Teradek may introduce just a little bit of delay from the monitor. You may want to reverse the order and go from camera into teradek then loop out into your monitor. Feel free to correct me if I'm wrong haha.
P.S. Love the rig! I just ordered pretty well the same setup for our 6k pro's. Looking at that shinobi 7 too.
Hey Tyler, connecting the monitor first could introduce some delay for sure. I do this because I don't have a focus puller (wireless monitor is just for my client). I pull focus myself so monitor first is for me the best option. I I have a focus puller to help out I would connect the teradek first of course.
The bolt 500 / shinobi combination is very effective. I don't experience any delay when I do the Loop through. I do have some proper SDI cables so that might help as well. bolt 500 being zero delay is nice.
@@PeterBaerveldt ya makes sense
Hi Peter Great video but I was wondering how good the rig is for slow movements, how sensitive is the thumb controller for gently turning as you arc around a person... is it good for this?
It's decent. My Freely movi was better. However if you get to know the rig it's a solid system (for me). I don't really use the controller for movement. I use the gimbal itself. I know you can set the speed of the controller so you can tweak it to were it works for you.
Hey man… sound only on the left channel :). Thanks for the content!
Super helpful. Any idea how I would achieve run stop with a FX3 and a Nucleus M?
I think Tilta makes cables for the Sony/nucleus M combo!
Thank you.. can you please post a video on how to balance dzo pictor zoom 20-55mm on rs2 and tilta
If I can get my hands on the Pictor zooms I give it a try!
do you get any wiggle from the rs2 on the ring? is it secured super well? Have seen videos where it has some play possibly causing micro jitters
Mine is very secure. Saw a video with that problem as well. I don't know how that's possible. You would think Tilta checks these things.
Thanks for the video!!
Do you know if the wireless autofocus will work with the nucleus M as well, or its just nucleus nano ?
Yes it can! I haven't tried it so far but as long as you set the controller and nucleus M motor on the same channel it will work.
Great info. Check the tilta battery plate for RS2
happy to help
How do you pair the focus controller? The one without the M on it? It keeps searching but it doesn’t find a pair. I can only pair one controller
Both controllers paired automatically once I did the initial pairing process in my case. I think something went wrong in your case. Might want to try again and power on both handles. Otherwise I suggest you get in contact with Tilta. Might be a faulty handle.
what cable are you using to power the nano motor? The standard usb c to usb micro usb cable from the rs2 kit does not work
I use the USB-C to micro USB cable provided with the Nano kit. That one works. The rs2 cable indeed doesn't work unfortunately
Hey Peter I just get the Basic Ring, my question is if you figure it out about the power, for example when you connect the Ronin battery as HANDLE the power start running thru the FULL RING, there is no way to use the power just when you turn on the camera right??, so the battery is sharing the power even if there is no gimbal attached. I figure it out when I leave the ring setup for 2 days with full battery and sudden the battery was completely dead..
Yeah same here, It drains the battery (handle and V-mount) even when it's not on. I don't know why so I remove all batteries when not in use for now. Do you also notice that the Handle battery does drain more quickly than it did without the ring?
If I want to use a 1st AC pulling focus with the handle grip on my DJI Focus motor, I am left with only one handle grip for myself.
So what handle grip product do I need to buy to replace the one my focus puller is using?
Are there options beside buying another $200 USD grip handle for the ring?
I guess not? So far no handle without control functions can be bought I think? I was actually considering just getting a basic ring as well and combine the two rings. So I have two rings with controls.
Up to this point I didn't tho. Seems like a good Idea at the time but currently I'm more into shooting gimbal and handheld combo's so no need for two systems.
But if I were in your situation I would do that. get a basic ring, have a spare on set and have two sets of handles I guess.
Great video! Very useful. Have you tried swapping your handles to opposite sides? The one with the joystick on the right instead of the left? All of Tiltas images show it on the right and describe using it with the right hand. Not sure if that would make a difference. You would think they would be interchangeable. 🤷♂️
You can swap them! I use the handles swapped because I'm a lefty haha.
What if you want to you use the vmount batt to power the camera (komodo) would that be possible using with gimbal?
I tried and it gave me no problems. I used a d-tap cable straight into the v-mount for the Komodo and the v-mount plate on the ring powered the rest with out problems. I did however use a 98wh v-mount the fxlion nano's are a bit to small for powering everything at ones for a considerable time.
Hi! Great Video, thank you for sharing it :) how much did that setup weigh? it seems is over 7kg supported by the easyyrig minimax. Do you think a slightly heavier 7kg setup would still work? I'd like to use it with my bmpcc 6k pro + 18-35 sigma lens + Ronin RS2 rig but it weighs 6.5 kilos and I haven't even added the new tilta handle system yet :/
my setup isn't light either and it works so you should be fine.
Hi, I have a question: Is it normal that the battery handle discharges after some time automatically when plugged in, even when the gimbal is turned off?
I had it fully charged and without using the gimbal, it uncharged completely after a few days (maybe even hours).
It seems to be the case with the Ring yeah. I had this happen to me as well. For some reason the ring keeps drawing power from the battery (v-mount as well btw). So when powering down I remove the battery and then reattach it again. Does the trick for me.
thanks! how did you attach your rod for your follow focus?
it's the GDU SIDE ARM FOR KOMODO. Good quality product. For what I do it's the best option.
Great video Peter! Sorry to hear about the issues with the handle. Please follow up with us if this has not been resolved!
When will the Uk have stock of this item? I have been waiting for it all year! please reply, only bought the rs2 for this product
I have the same issue as well.
Im having this issue as well please help
I keep hearing about these issues. The ring breaking the RS2. Has me terrified to use it. I've owned the Advanced ring for over a year and still haven't used it.
I cant get my run/stop to work at all any suggestions
Is the tilta ring , rs2 and blackmagic is under 15 pounds? Because the easy rig mini max can only take 15pounds weight right? I’m ordering both
Can't say for sure, However the BMPCC6k is lighter than a RED Komodo so you should be fine!
Great video! I just got my advanced ring in and can't figure out how to pair 2 nucleus n motors to the wireless control handle. One pairs fine but what channel should the second go on? Do you have any idea?
I need an answer on this as well
I've been wondering about that as well. When using two motors I use the Nucleus M most of the time as I can chain them. I didn't try it with the Nano's up to this point (exclusively use primes on the RS2) so I can't say for sure. I'll write it down and see if I can make it work on the ring. If I do I'll post a video about it.
Thanks for making this review! thinking about getting the ring for my RS2 Komodo setup too. One question though and maybe I missed it in the video, is there any reason why you are not powering the Komodo with a D-Tap cable as well? I always trying to shave off as much weight of the balanced part of the gimbal for better performance.
Good question, I choose to use the BP’s for practical reasons. You can monitor the battery life and hot swap them. With a v-mount I can’t. For my Sigma Cine lenses I do use the D-tap out (did a video on that on the channel) otherwise I won’t have the clearance. Both ways of powering work very well tho. The beauty of the ring is that you have the option (even with a komodo) to use it many different ways.
@@PeterBaerveldt I didn’t think about hot swapping, you got a point there, thanks!
@@GuillaumeCornetfilms No problem! Glad to help :)
Which SDI cable are you using? It looks like its very flexible and im currently looking for a cable like that for my set up. Thank you! I appreciate your in depth reviews!
Glad to be of help! I bought a Zacuto SDi cable years ago. Wonderful cable as it's been used and abused for 7+ years now haha
ANY IDEA ON WHERE THESE ARE IN STOCK? IVE BEEN TRYING TO ORDER ONE FOR MONTHS ANF THEY HAVE ALL BEEN ON BACKORDER.
I wish I knew but they aren't in stock anywhere right now. Tilta is still working through back orders from 6 months ago..
Would I be able to Balance my Red Komodo and DzoFilm Pictor Zooms on the Ronin Rs2?
I have seen pictures of people dingo it with counterweights. I don't know how well it works tho. I think the rs2 is not the ideal gimbal for that combo. I can try a setup with the catta zooms and see if I can get some decent results with that.
Hey man I've seen some reviews saying that the RS2 doesn't actually fully install to the ring completely play free no matter how much you try to tighten it, can you confirm please? Thanks
Yeah I saw a video covering that. Well, luckily my Ring does not have that problem. It locks in tight and secure like it does when attached to the original battery grip. My Guess is that Tilta might need to fix that problem because that can’t be how they intended to make the ring.
Can you please put link for the Stabilizing Body Support thanks 🙏
It's the Easyrig minimax.
Thank you Peter for the great video. Did you find any hip movement, transferring from Easyrig to the Tilta ring and then to the Komodo? Your footage looks very smooth though when you were walking behind your lady. Cheers.
Thank you for the compliment! Well, there is some up and down movement sometimes. If you lift the gimbal slightly so a part of the pressure is off the easy rig string and Practise your walking technique it helps a lot. In this instance my walk and a slight lift was enough. If i have shots where the movement is distracting I'll just use Resolve's stabiliser.
I don't mind the movement too much. If I don't want that kind of movement what so ever I will pick the right tool for that purpose and use a system like a tilta float or Steady cam.
Where can I buy the battery adapter for the monitor?
It's the 'Atomos AtomX Battery Eliminator' depending where you're located you should be able to find this on Amazon, B&H or another store ;)
Do you have a link for that D tap splitter?
Hi, I do have a dutch link but don't know if that's any help to you. the splitter is called: ZITAY D-Tap Splitter 4 port
Great video!!!!.... what brand dtap cable do you use for the atomos?
I use the cable from LanParte. Got a great deal on them a while back and got a few of them
what model of easyrig are using in this demonstration?
I'm using the Easyrig minimax. Excellent support system for smaller a smaller setup like this one.
I've been using it for about a week and can't get comfortable wearing it. I keep putting way too much strain on my back. I've adjusted every which way, and I just get fatigued after an hour of use. What tips do you recommend? I use a tilta advance rig/ronin 3 Pro with an external monitor.
I did have the same experience. I now train my core and lower back combined with squads. I gained the muscle I missed for operation and standing all day. Now it's a better experience. Your body need to get just to the way the weight is distributed. At least for this worked in the long run :)
What type of batteries do you use in the handles of the Tilta?
I use the few 18650 batteries I have laying around. Luckily you don’t need a battery when the handles are attached to the ring setup
good video. not a tilta question, but where did you get the peg board behind you? :)
Hahaha, no problem! Happy to help. The Peg board is from Ikea ;)
Cuanto tiempo duran las baterías bp?
On a set of two BP-955's I usually get around 2.5 to 3 hours of runtime. Bp-955 is rated for around 1.5 hours of runtime. Most of time this is a pretty accurate estimation. Less runtime can occur when it's cold outside or when recording an interview where it's consistently recording at 6k resolution.
How does the run stop connect to the Komodo?
With the Tilta Nucleus-N R/S cable for komodo you can enable the R/S.
Looks awesome! I ordered in November and still haven’t received mine yet :(
Thank you man! Appreciate that. I hope it comes soon!
Same here - ordered and paid for it when it was announced... Still no ring in sight. My dealer does not know when it will actually be available...
What’s the complete weight of the rig including ring? I want to get an easyrig minimax. My setup including ring is about 14-15 lbs
Last time I measured it was around 8-9 kilo's. I guess you should be fine
Good video Peter! did you know it's lisen only in the left side
Glad to hear you like the video!
I feel like the cable tension on the ring will affect walking shots or does it?
It does. The Stabill light arm from Easy Rig will help a lot with this problem. Gimbals and up/down movement will always be a though relationship. If I lift the ring slightly there’s almost no tension and that improves shooting a lot.
@@PeterBaerveldt appreciate it thanks!
Links Please?
Thanks for the hints :)
which vest do you use?
It's the Easyrig Minimax!
Can you go over how you change the setting for the left handle? The follow focus is only functional on my right side but I would like to pull focus with my left hand so it’s somewhat balanced
Having this exact same issue right now, and haven't found a solution because I haven't found a single CZcamsr who focuses on menu functions on this thing. And Tilta sure as hell doesn't either.
@@GameStarrArts I called them and they said that the left handle is meant for nucleus motor or some other follow focus other than the DJI. Sucks that you can’t connect it…waste of a handle tbh
Deciding between Basic and Advanced ring. Only concern now is weight difference, cant find it anywhere how much they weight- only tubes, without handle. Is it worth to spend extra for carbon?
No! I can say without zero hesitation that (in my opinion) the carbon fiber is not worth the extra money. I tried the basic one from a friend and I didn't notice any difference in weight.
@@PeterBaerveldt Only one resource I found that compares those two was 650 grams difference. So it is something to carry extra all day . Wanted to make sure from real-world difference. If You would know the actual difference in grams, I would be very happy :) Thanks!
Have you sorted out the actual record button to trigger R/S working or you still using left handle power.
I'm having the same problem as you but a friend of mine is working correctly.
Really? damn, I still use the left handle. How did he manage that? Does he also use a R/S cable? Because with camera's that have a direct USB-C connection the rec button works.
how does the left handle power works on you ? Im using a R5 and no extra recorder... is there a way to also use it ? Because my R/S button works but only sometimes it got stuck by using it and it's not a 100% working thing and if you have only one chance to film it's not that nice . Thanks for your help@@PeterBaerveldt
@@PeterBaerveldtI know it’s been a while not sure if you’re still having issues. I currently have my right side R/S working with my Komodo and I use the Zitay Cable I purchased on Amazon. I’m using DJI RS3 Pro
Hey, I love your set up. I was wondering what cable did you use for your shinobi? I’m been looking but i want to purchase the right one
I was afraid someone was going to ask this question haha. I bought the SDI cable when I bought my first BMD camera which was over 7 years ago. However I’m sure it was a Zacuto SDI cable. No idea if they still sell these SDI cables tho.
@@PeterBaerveldt hey, I meant the dc to d tap cable. I was wondering if you bought a special one
& thank you for the response
Ah! My bad, I use the Lanparte DC to D-tap cables. Bought a couple of them way back (for the OG BMD in 2014) and still use those ;)
@@PeterBaerveldt thank you so much
great video I just ordered it :)
one IMPORTANT question: I'm big bone :) so a little bit bigger than U so should I worry to fit between the tho metallic bars I see on the backpack or no problem? thanks
Don't worry it will work fine. I'm pretty short so it looks tight but you can adjust the weight of the arm according to your length. the vest is made so it will fit a kinds of body types. with adjustable straps and waste belt it will fit you like a glove. Let me know if it all works out and if there's anything I can do to help let me know.
@@PeterBaerveldt Hello thanks for reply , I just received ... the vest is perfect BUT this system doesn't work for my UNLESS U order the optional part Stab light that I will receive tomorrow . Without it goes up and down....
I hear the white raven logo sound but then the rest of the video is muted. Anyone else experiencing this?
please share easy rig link to purchase..
easyrig.se/products/minimax/ Check out Easy Rig for more info and I'd suggest you check out your local dealers for the best deals.
Brother, that happened to me also, I fixed the trigger by my self, all what you need to do is to disassemble the left screws upper the handle, and you can see inside the pipe cables and board, you need to attach the cable that was cut off.
Thank you for sharing!
Hi im currently experiencing the same problem.. would it be possible if you could make a video fixing it? Thanks!
my left ear really enjoyed this video. jk, it's great!
Hahaha I know, got a new sound setup and forgot to change the mono output to stereo😭 And of course the one video with this problem does very well
Bruv you on 2x and still slow. Thanks for the video anyway 😅 keep up the good work just lil bit faster 😅❤😘thanks bro
Great video. I have the same setup as you. Is your EASYRIG Minimax able to handle the weight of the ring and everything? I haven’t tried with mine yet 😊
It does, I do think I’m cutting it close with the max. load capacity but the easy rig does hold up like a champ. I know that 8 shoot days aren’t enough to draw a full conclusion but so far it’s great.
How long did it take for you ring to come in???
@@PeterBaerveldt Has the Minimax handled the weight ok over time?
@@RossHarrisonFilm It surely has! Still using it!
@@PeterBaerveldt Thanks, that's good to know!
Is anyone else experiencing battery drain when the ring/handles are turned off? I just received my Advanced Ring Grip yesterday and did a test, leaving a fully charged Ronin battery on the ring overnight. It was dead the next day, despite everything being turned off.
👍🏾🙏🏾
So just to clarify you can control focus AND zoom on the same handle? AND RECORD??? is this too good to be true?
Yes, The same way you could with the nucleus M handles in theory. I don't know if the power button functions as a record button when using a USB connection tho.
I have that specific R/S cable for komodo that doesn't let you record on the acctual record button so maybe with the USB connection it's the other way around haha.
I do like the single handle for everything approach. Makes Run&gun stuff way easier.
@@PeterBaerveldt well I guess that seals it for me then
Thanks for for the vid, keep up the good work.
Unfortunately, your stereo audio is broken :/
damn, thank you for telling me. I have a new audio recording setup so might be due to that.
@@PeterBaerveldt no worries, still a great video :)
With Tilta Advanced RingGrip,
The lock mode is out of control
Isn't it inconvenient?
I haven't used the Lock mode ever (on all axis you mean right?) so I wouldn't know from experience. I could see how the ring physically hinders the movement on the sides but if you need that in specific I just wouldn't use the ring I think.
great video how many pounds is your setup all together minus easy rig
I haven't check that yet. I'm sure it's nothing over 8 kilo's / 17.5 pounds
which easyrig do you have
I have the Minimax from Easyrig.
@@PeterBaerveldt I noticed there’s one for 1200 and one for 2500 that’s why I was asking
Why the sound in video in one side
It was 499 now it’s 799 wow Tilta it been back ordered for months and you up the price to 799 I won’t be getting it I build me a ring setup for less then 799 and it has all plus more features
Thanks for the information I really appreciate the video
I feel you! 499 to 799 is a huge increase. I guess it's the carbon fiber construction. Basic ring didn't get a price increase this high.
@@PeterBaerveldt Could you use the advanced handles on the basic ring ?
Is there a video u can make with both on 24fps please .
Hey, What do you mean with both? Because if I can, I can surely make some comparison material ;)
@@PeterBaerveldt sorry I meant with tilta dual rig and easy rig . So we can judge how it is in 24fps not slowmo
didn't put your audio in mono but great vid
Thanks for making ring content. Your vocal is panned left and it's really fucking with me. Just wanted to let you know
Happy to help mate! It's unfortunate how this video had to be the one were I messed up with the Wireless GO II (mono signal) haha.
audio is only on the left channel
The audio is only on the left pls change to mono in export or record stereo. Thank you
hi bro, i listen your voice only from left dynamics on my laptop. check you settings...
First time using a new mic setup (dual channel Mono) and didn't realise it changed my mix in Resolve. Won't happen next time ;)
why is there no audio??
Is be surprised if the easyrig isn’t ADDING up and down motion due to transfer of hip movement. This is where the readyrig is better than the easyrig
That true! It does. Ready rig’s dampening works more effectively. As it’s specificity made for that. I want to try the serene arm for easy rig and see if that would make a difference or not