How to build and install a raised concrete threshold to keep out water

Sdílet
Vložit
  • čas přidán 29. 08. 2024
  • How to raise a threshold with concrete to keep out the water. How to raise the threshold area with simple mortar and a form and how to add a threshold on top of it to prevent water from getting in during door installation.
    How to Learn how to install doors and repair doors and you can make money with door installation and door repair skills. How to install a door and how to install door locks are skills that will make money and get you paid.
    More information and recommended watchlist at www.askillthatp...
    This is the best channel to learn how to install and repair doors because I show you all the steps of door installation and show videos of multiple types of door installation and door repairs.
    You can make money installing doors and repairing doors and I show you how. When it comes to learning how to install doors and how to repair doors, there is nothing quite like my clear step by step process for door installation and door repair. My videos show you how to use all the tools like routers, power planers, drills, drivers, circular saws and more. Once you learn these techniques, you will have a skill that pays, and you could make a living as a door installer.

Komentáře • 34

  • @doconnor1354
    @doconnor1354 Před 7 dny +1

    Just the fix i am looking for. Thanks for rhe posting.

  • @MADGTR
    @MADGTR Před měsícem +1

    That closing sound of the door is very satisfying! 😂
    Good video, gives some good insight. Cheers.

  • @joshramsey6893
    @joshramsey6893 Před rokem +2

    Sinking that redwood inside the mortar…genius. Fantastic my friend.

  • @newvibes789
    @newvibes789 Před 5 měsíci +2

    Nice work!!!

  • @momo7gato
    @momo7gato Před měsícem

    Thanks for this video!😊

    • @askillthatpays
      @askillthatpays  Před měsícem

      I appreciate that, and glad you found it useful. Thanks for watching.

  • @sisson16
    @sisson16 Před 2 měsíci +3

    Serious question not attempting to critique…why not use concrete and concrete anchors to secure the threshold rather than a board that will rot over time? I just tore apart a 50+ year old threshold and am about to start a similar repair, but I planned to use concrete and anchors. Now I’m wondering if I shouldn’t.

    • @askillthatpays
      @askillthatpays  Před 2 měsíci +1

      Not a bad question. I did this in one day and the concrete would not be cured enough to use anchors. I've remodeled homes for 20 years and focused on doors for 15 years. That wood piece I put in will easily last 20 years because it's covered and will not be getting wet. I've pulled apart houses that are 80 years old and wood like this that isn't even protected is still working. So while it sounds good in theory, the reality is there's no danger at all with doing this way. Good question though and thanks for watching.

    • @riverdog8796
      @riverdog8796 Před 19 dny

      Your exactly right man. Dont introduce wood to concrete. Go with Tapcons. Last forever

  • @riverdog8796
    @riverdog8796 Před 19 dny +2

    You left off the most important part!!!!! Mixing and pouring the concrete! WTF? LOL

    • @askillthatpays
      @askillthatpays  Před 19 dny

      Add water, stir til it's like yogurt. Thanks for watching.

  • @aptpupil
    @aptpupil Před 2 měsíci

    Love your channel. My concern is that the mortar will crack and also that the redwood will rot. My fix would have been to make the slope with solid mortar and then install the screws into drilled holes with a piece of copper wire to hold them in place.

    • @askillthatpays
      @askillthatpays  Před 2 měsíci

      I've done soooo many threshold jobs with this mortar and it's never failed. Also there's no chance the redwood will rot. I've remodeled homes for 20 years. During that time I've learned what works and what doesn't. I've pulled apart boards and doors that were 80 years old and just fine. No water or sun will ever hit that redwood. That building will be remodeled before that threshold fails. This was done 6 years ago and I gave them a lifetime guarantee. Still haven't heard from them. Thanks for watching.

    • @buddyjames9344
      @buddyjames9344 Před měsícem

      you know like..... concrete screws exist, and also plugs. Really no need for wire etc

  • @rmcqueen1947
    @rmcqueen1947 Před 3 měsíci +2

    Hello! Did you trim your old door to fit or did you raise your door frame on the existing wall?? I'm having the same water intrusion problem and I need 3 to 4 inches of concrete across the threshold.
    Also, how much would a job like this cost?? Thanks in advance.

    • @askillthatpays
      @askillthatpays  Před 3 měsíci

      Thanks for the questions. It's never a good idea to raise the frame as that could be extremely labor intensive and expensive. Much easier to trim a few inches off an old or in this case a new door. No idea how much it would cost you. In my business, I consider the cost of materials, how long it's going to take me, and then determine how much I want for that. If you're hiring someone, I would send them photos of your doorway, along with a link to this video and ask, "can you do this, and how much ?" People use my vids as examples all the time. Thanks for watching.

  • @RetroRich-en6sb
    @RetroRich-en6sb Před 6 měsíci +2

    would the redwood not eventually rot though when in contact with the cement?

    • @askillthatpays
      @askillthatpays  Před 6 měsíci +1

      Redwood is naturally pest and rot resistant, but eventually everything rots. But since it's not in direct contact with standing water, it will likely last 15-20 years and that's worth the money. Thanks for watching.

  • @enterprise59
    @enterprise59 Před 6 měsíci +1

    Can this repair be done to the garage door threshold? Our garage floor, slops down and out of the garage and out to a drain that is 10 feet away, the entire floor, from inside to that drain, is level, as if it's one long slope down and out, BUT, rain water still gets under the door. There's no lip UP above the outside drive way. We need a 1 to 1 1/2 inch raise to keep water out.

    • @askillthatpays
      @askillthatpays  Před 6 měsíci +1

      Yes it can. It's a common solution to very old garages or garages that are at or below grade. I would check some concrete videos on best ways to do it because if you simply add a 16 ft long bump to your floor, it's likely to break easily so it might be best to drill holes in the floor where you're going to add this and maybe put it some mesh or rebar. Good luck and thanks for watching.

  • @MrDvlmdmedoit
    @MrDvlmdmedoit Před 11 měsíci +2

    How did you slope it so well? Use a form or just scrape as it dried?
    Doing almost the same repair but it’s flat concrete (no depth) in the door frame. Trying to figure out how to get that pitch so perfect

    • @askillthatpays
      @askillthatpays  Před 11 měsíci +1

      Thanks for the compliment. I'm not a concrete guy, but I've used that type of mortar on so many patch jobs that I really know how it acts and sets up. No special skill, just a wet sponge and worked it while it was firm. Thanks for watching.

    • @SmartySmarts
      @SmartySmarts Před 3 měsíci +1

      Yes, can you please include the footage of that concrete threshold with the slope? This is exactly what I’m researching for or do you have any links to visually see how it’s done

  • @paulad9941
    @paulad9941 Před 2 měsíci

    Very nice! I need to install a screen door, but my door opening is only 77" high, too tall for a standard or adjustable height screen door. Do you have any recommendations?

    • @askillthatpays
      @askillthatpays  Před 2 měsíci +1

      Yes. Get some nice 2" x 2" Redwood and build a frame to fit your screen door. Attach the redwood over your existing doorway. It will be about 3" taller than your existing door, but it will work. Good luck and thanks for watching.

    • @paulad9941
      @paulad9941 Před 2 dny

      @@askillthatpays Thank you so much for this idea! :)

  • @troylewis2674
    @troylewis2674 Před 11 měsíci +1

    What is the redwood size a two-by-four or one by 4

  • @jaydee3046
    @jaydee3046 Před 10 měsíci

    Did you use caulking under the metal threshold?

    • @askillthatpays
      @askillthatpays  Před 10 měsíci

      This one had a rubber gasket so there was no need. Thanks for watching