2017 Silverado Z71 Project - Full Build start to finish
Vložit
- čas přidán 13. 06. 2018
- After the build was finished I did a 6” lift install and put on 35s, here is the full lift install video • 2017 Silverado Z71 4x4...
Picked this Truck up for about $16,800 from insurance auction, it had only 700 miles. I ended up installing a 6" lift on it an 35s, not shown in this video, but with all the repairs and different parts im about $27,000 total into this truck. Not to bad for a $50,000 truck, yes its salvage title, but who cares i did all the work so i know this truck like the back of my hand and i know i tried to do thing the best because i was doing it for myself. Hope you guys enjoyed the video.
📺Subscribe and hit the notification bell! ► bit.ly/2W4e5BN
🧰FixitNicks Tools and Parts
1. Amazon Garage ►amzn.to/2QlHZdO
2. F350 List of Parts used: amzn.to/2JQ2MXo
3. Silverado List of Parts used: amzn.to/30qD7KJ
4. My Tool Box: amzn.to/2VzhaVQ
5. Battery Jumper: amzn.to/30wryBq
6. BlueDriver OBDII Scanner: amzn.to/2WaNlQ4
7. Milwaukee Brushless 3/8" Ratchet: amzn.to/2QanthL
🎥Things I use to make Video
2. DJI Osmo Pocket: amzn.to/2LUtOzr
3. Insta360 One X: amzn.to/2Yy64T2
4. Samsung 128GB Micro SD: amzn.to/2YwT9AE
5. iPhone 8 Plus 256GB: amzn.to/2LSvj16
6. iMovie or LumaFusion for editing (App Store)
🔥FixitNick Shirts and Merch ► bit.ly/2Vu8v7e
FixitNick on Social:
Facebook ► / fixitnick81
Instagram ► / fixitnick
Email ► FixitNick81@yahoo.com
It was time to put in 35s, my kids love the lifted truck, it's like a play house now haha. Little guy Matthew was helping out with the wheels. Truck looks pretty awesome, wife and the kids need steps now... AMP Power steps perhaps!!?
Tires are 35x12.5 Firestone Destination MT2
Wheels are 20x9 -12mm Fuel D552
Lift is a 6.5" Zone (BDS sister)
Here is the cost so far:
Truck $16,800
Auction fee: $700
Dealer fee: $150
Towing $500
Upper control arm $60
Front Axle $100 + ($100 passenger side)
New tire and mount $300
Smog test $50
Brake and light inspect $40
Truck scales $10
Alignment $50
Seat air bag $235
Seat belts x2 $150
Different Wheels/Tires $100
Seat cover repair $50
Fender black $350
Rear door black $350
Freight cost $100
Rocker panel $200
Front door $350
Freight cost $150
Rocker panel install $700
Both roof airbags with shipping $1,100
Tow mirrors with harness $200
Driver pillar handle $40
Garage opener upgrade $60
Paint and prep $1,000
35" Tires OTD with discounts $1,000
20x9 Fuel wheels $1,180
TPMS Sensors $80
Zone lift $1,000
Front valance $330
Alignment $60
Sold 18" fuel wheels & tires (- $1,600)
Sold 2 damaged doors (-$240)
Sold stock mirrors (-$300)
Sold stock harness (-$100)
Sold pasanger side step (-$60)
Current Total: $25,335 - Auta a dopravní prostředky
My website - www.FixitNick.com
Survival Stuff - a.co/0amfkVd
Amz Garage - amzn.to/2QlHZdO
My Instagram - bit.ly/FixitNick
My FBook - bit.ly/FixitNickOfficial
honestly the only reason that the truck looks that good is because the kid did all the hard work
haha yup
JOSETHEBEAST22 no give this man his credit though for real. You got some talent dude!
Optic ForSyth I did I said the truck looks good
dude check the video again and see the wheel plates when the car came and check when everything was done the wheel plates were different....
ZACK PATEL what are you saying? He’s got video proof of everything he’s done.
I work in a shop that does this professionally, we turn out a Silverado hit like this in about two weeks. The fact that you did this in your drive way with no air tool is super impressive...keep up the good work
Thx appreciate it !! I hope to have shop one day lol
Bro the only reason it took 2 weeks was because you didn't have a kid to help
God, people these days.
Where’s the shop? My Silverado just got totaled yesterday. Looking to rebuild it
Bro we all know this is fake........ clearly the kid did all the work
haha soo??
LOL
Wolf_bloodlamb _ LMAFO
lol
The fact that you not only included your son in the project but did an amazing job too is astonishing and really inspirational, i remember growing up and working on cars with my father, it was one hell of a thing to do and something that really helped us bond, keep up the good work and im so happy youve found success in doing something you love as well as being able to include your child in it, and im proud of you for being interactive with your subscribers and comment section too, you are as i believe what all youtubers should be, a true inspiration
Thanks msn really appreciate it!! It’s fun to reply back, also get helpful hints and ideas, I’m not an expert so anything I can learn from others i soak up. My boy loves helping a ton, girl not so much but I’ll keep trying lol
Nice to have the little guy helping you.
hes always up for helping, i hope he continues to be interested
At age 10 he will rebuild engines. And at age 12 he will be welding like a pro.
Your kid is an excellent helper!
"sometimes" haha
I love how these videos show that cars in a some sort of junk or crash can be replaced and be used again, great work!
Thats amazing, little guy gonna grow up to be like his father haha
I hope so thx !
But fixing electric 😢😢😢😢😢 that's all there will be 😢😢😢😢😢
Ur a genius by using the seat to install the doors , I would’ve never thought of that, good job 👍 👍👌👏
Hahaha thx, I have used a kids bike before lol
FixItNick the seat is adjustable that’s very clever
Boosted C7 Z06 yes lol prob the most genius idea I had to date
I was about to put that then I saw this comment also if that is your car in your pic it’s nice
just a smert boy
The fact that your kid moved the camera to a better angle is cool
I was looking in the comments to see if anyone else noticed too 😂
You're incredibly talented man..... After highschool I want to be just like you...... Thank you for showing me my dreams are possible....
Thank you bro, honestly it’s all hands on learning.
You have a lot more patience than I ever would have. It was spectacular body work you done and how clean you did it, the body lines turned out amazing and perfect. And the one thing people don't understand is that this type of work doesn't take days but months or years to get it done correctly and accurately to get it to that perfect image. All I can say is great work you are truly an inspiration.
Thank you appreciate it
Thank you appreciate it
Seeing you do this make me want to fix anything. It could be done. Inspired me.
Thank you and I’m glad it motivated you, it’s all about DIY bro
You are no joke, I'm not easily impressed.
lol thanks sir, backyard youtube certified mechanic haha
Grasias
Como
Man ... the little man is just as hard working
As Dad . Really awesome to see you spend
Quality time with him and accomplish a project.
I know it’s a lot more time but worth every memory.
Hug that little man from us ! Great work btw
For the people who know how to fix broken trucks this was a steal brother
Thx sir, I felt like it also
This dude didn’t use any air tools in the beginning and welds with his sandals on!!
Air tool are a hassle to set up LOL and sandals just stings a little no biggy
FixItNick my hero!!
Why wasn't this video in my recommendations sooner???
This is amazing!
Lol thank you, sorry I tried
ستمر
That kid is gonna be a great mechanic just like his dad. Thumbs up👍
thanks bro i hope not a weird teen emo lol
That is the smartest 1 year old mechanic I ever seen great job little guy
Haha thx bud, you should see him now days lol
LETS GET THIS VID TO 1,000,000 views!!! Thanks all for all the views, when I get 50,000 subs I'll be doing a giveaway to 5 randomly selected viewers, I'll post a video about what I'll be giving away when I get into the 40,000 range 👍👍👍😘😘😘
FixItNick its 1 million bro
Are you need a loan contact me danieldoust03@gmail.com
FixItNick
Ola
FixItNick awww lol what a nice kid
You are a bad ass, it looks awesome, i have the same truck but paid the sticker lol. I cant burn the tires like that tho
Thx sir lol
FixItNick how did you did that burnout?did you just disengage the traction control or did something else?. I have the. Same truck but I’d never attempted to do a burnout yet lol. It only has 10,000 miles. Great video by the way
Idk what he did but just hold the traction control button till it and stabilitrack are off. Thats what i do but i have a 2012 not a 2017
if you press traction button, you will get TC on the dash, but it doesnt actually turn of TC, you have to actually hold the traction button for about 5 sec till you get a notification saying stabilitrac is off.
Your such an amazing father, teaching that kid and rebuilding the truck made this video AWESOME.
Man that kid definitely knows what he’s doing smacking it to make sure it can take the beating from some rocks and other things good job lil man and to you too for letting him help
im sorry but those wheels killed me
well those wheels i had to put on because i sold my other ones to get new parts, also they were perfect for a burn out lol ....in the video where i installed the lift i installed 35s with new wheels
Yea definitely needs bigger wheels
Same
Very nice... also pretty much answered most questions in the description which most youtubers dont do.. and to think you "could" have skipped out on all the airbags and saved even more.. but 50k truck for almost half price.. nice job bud.
Yea I could have skipped the air bags and saved like $1,000 but might as well do it all right. Just redid headliner for $150 will be putting it in this week I hope
c_alright damn you got skills!
dude check the video again and see the wheel plates when the car came and check when everything was done the wheel plates were different....
These are the best rebuild videos. One video start to finish- Not like these other money hungry chumps who make it a 10 part series and talk 90% of the time.
I am French and I really admire the work that you American you do on your cars 👌👌👌
thank you, but im actually from Ukraine
🧰FixitNicks Tools and Parts
1. Amazon Garage ►amzn.to/2QlHZdO
2. F350 List of Parts used: amzn.to/2JQ2MXo
3. Silverado List of Parts used: amzn.to/30qD7KJ
4. My Tool Box: amzn.to/2VzhaVQ
5. Battery Jumper: amzn.to/30wryBq
6. BlueDriver OBDII Scanner: amzn.to/2WaNlQ4
7. Milwaukee Brushless 3/8" Ratchet: amzn.to/2QanthL
🎥Things I use to make Video
2. DJI Osmo Pocket: amzn.to/2LUtOzr
3. Insta360 One X: amzn.to/2Yy64T2
4. Samsung 128GB Micro SD: amzn.to/2YwT9AE
5. iPhone 8 Plus 256GB: amzn.to/2LSvj16
6. iMovie or LumaFusion for editing (App Store)
🔥FixitNick Shirts and Merch ► bit.ly/2Vu8v7e
FixitNick on Social:
Facebook ► facebook.com/fixitnick81
Instagram ► instagram.com/fixitnick
Email ► FixitNick81@yahoo.com
ៃៃៃ២ៃៃ
Nggo ak gelem kang
I hope you are okay
I’m a ford guy, but this was dope bro, keep up the good work!
shayne jag I’m a ford guy as well but I respect any man who can do this type of work no matter the brand
Thx man, I'm working on a f350 dually at the moment :))
Thx bro, I picked up a dually 7.3 now I'm more excited about it
shayne sâg
Fuck ford
I’m glad to see you managed to put the smoke back in the tires at the end…really makes a difference in the ride.
Your son helping was the cutest thing I’ve seen all week 😍
haha thank you, he cries if i dont let him sometimes lol
If I weren't super jealous I'd say this is super cool. All I've been able to rebuild are late 2000's Hondas.
its because you feel comfortable with it, obviously you have the skill just gotta expand it to other makes if you wish
Christina Andwena wow dude that's awesome. Keep rebuilding late 2000 Hondas please
The song that plays is Elport - What we live for
I dont remember lol
Love the little man helping. He’s awesome.
Thanks
Temporary mounting of mirrors !! Ingenious!
Very impressive work!!
Thx man
Auto Auction Rebuilds クワ「スクをインクインいく塁クリククリクを茎寸暇する枠きわアククSiri泳諏訪ススリクリわスキスワキス「をキスキス好き好き「リキスラススを石りくキンンク行くかしら李氏ら然り差しリシアしかりらすりすりすりすすりすりすすりすすすすりすりすりすりすりすすりすりすすすりくをくくりするすするすくをすすをくをすくをくくくくくくくくくくくくすすをくをくをすし!きをりんくんす
sir you Awesome 👏 you yes gain a new
subscriber i love when people with mad skills do amazing things like you yes did with the truck i wish i have 15% of your skills god bless you keep the good work
thank you brother, really appreciate your comment
Great video!! You make rebuild look sooo easy anybody can do it. Thx for a new perspective of buying vehicles
Nice rebuild. I rolled my 05 chevy silverado. Bought a parts truck and completely rebuilt it. Used every body part off the parts truck (including cab). Used all interior from headboard to carpet to dash from the old truck. Took about 7-8 weekends. Now I technically have a 03 silverado, but with 80k original miles still 😉
Good work, I want to find rolled GT350 and get V6 body to swap
The kid is the real star of the show! Lol!
Haha yup
I love the work and thank you for taking your time listing the parts and prices.
You got it thx for enjoying :)
I don’t know anyone else with that much patience and passion. Prompts to you dude and your little buddy!
Thx bro, don't always want to do it, but most of the time it's fun
This is such an amazing video! Very inspiring!
This is awesome one heck of a good job 👍🏽
thanks bro
Amazing job my man truck looks fucking amazing. More motivation to continue fixing 02 Silverado 👍
Again another AWESOME build! Glad the little one helped 🤗
Haha thx, he’s a trooper
I only need to tell you that this video is awesome .. I never see such type of restoration in my life . The truck is amazing and the mechanic who worked on it is fabulous salute you bro awesome work ...
Thank you I really appreciate it
Teachin em young
yes sir
Freaking amazing 👏
Thanks bro
@@FixItNick jmhiq
Why did you take off the nice tires and rims 🤔
Now this is what I would call for resale, now those auction cars polished and waxed lookin pretty waiting for an accident to happen once it’s bought, good work
Takes time and patience anything can be done
That chair trick for the doors, was pretty clever. I've never seen that done before! Great job on the truck, too! 😁
Thank you lol , that chair works so good
Good job , respect from AFG 👍
Thx bro
Good job
thx bro
Omg love it nice to teach the lil guy something 😂❤️
That little kid right there when he is older he is gonna develop a new and dope car👍🏼👌🏼
Very very good job! There´s nothing like repair the truck yourself! I like the final song: Amadeus - Superior, greetings from Pamplona!
Thanks bro
Very good Bro
Thank you
Man it’s awesome that ur kid is helping you!
thx bro
great video fix it nick am glad i found your channel
Great video brah 🍻🍻🍻😎😎😎
Thx man
You have a handsome little helper! Reminds me of myself when I was little.
Haha thx
Awesome rebuild and video, also props to your little helper.
Thanks appreciate it!!
Amazing i was an autobody man before the military but could never build my cars because i never had the space i will make a video like yours in the near future
your son will go on your chanel in the future :)))))
haha it would be fun, ill try to keep him around to enjoy cars
I hope this. I following you and then I follow your son :))) It interest
That little guy😘😘😘
haha thanks
That was very impressive to watch man! Loved the video!
Awesome job that looks amazing
thanks bro!
Daddy's pretty! Accustoms the little son to the right thing! Greetings from Russia, Moscow :)
Privet privet , thank you
Wuaoooo me encanta tu video increíble custom jajaja 😂 saludos amigo 😎
That little kid is so cute helpin his dad. lol!
I never comment on videos, but letting your kid wrench with you is awesome. Keep up the good work.
Thx appreciate it
Damn you killed it whit that burn out at the end
👌
Thx bro, those who made it till the end got rewarded haha
Get a brand new truck for half the price and only need to put in a little work. Shit I would have done the same.. Nice video man!!
thx my man, i enjoy the process as well, some think im wasting time, but its the experience haha.... with headaches sometimes lol
Your little helper is amazing and too smart
Thx bro
I have mad respect for you for giving the truck a second chance to live good job and I likes the video
Thank you appreciate it
we all know the little kid is gonna be broke when he is older, he is already addicted lmao
Haha hopefully he can build itbif can't afford it
There both did good
Nangjelovskiليسبحنثبل
Dope...
thx bro
The adjustable chair was a nice touch/tip. Nice looking truck that should last a long time
Thanks man
Just found this channel today. Subscribing not just for the content, but the camera work.
😮impresionante mis respetos carnal👍👍👍👍
Thank you
Good shit man, please keep up the great work🤙🏽
Cool kid helping his dad at work 👍👍👏👏
Thanks appreciate it!!
You are welcome brother 👍
Puffff hermosa buen trabajo😁😍
Si lol
Was it easy to fix everything behind the wheel on the front driver's side?
behind the wheel like suspension? only top upper control was bent.
Yeah that is what I was meaning and that's a good thing that only one thing was bent.
Damn the truck came out looking badass and new looking, you even inspired me to try and rebuild my totaled 2006 duramax Silverado 2500 HD
Glad it motivated tackle it!!!
FixItNick I managed to get it 75% fixed just need to straighten out the frame a bit in the front, replace left fender, fill a few holes and a new left side of the bed and it’s done I replaced all of interior and fixed all suspension and I finally got it to start. Never knew diesels sounded so good without the muffler lol
honestly one of the coolest videos I've seen! good work!!
Thx bro
Dude, you inspire me to fix something.
Sorry, talking to the kid, but you too!
Haha thx
I was kinda all over the place with this build but seems u did a damn good job how long did that take u?
Thx man, took few months
This is awesome my man !!!! You make me want to find something similar and build on it. Again this is awesome !!!
thanks bro, do it!
OMG it Rose from the dead😭😭 Long Live That Heavy Chevy...Im So Happy 😭😭 tears of joy...What an Ending..speechless....
Haha thx bro
Did you sell the wheels and tires that came on it?
No I still have them will be selling the soon, why?
FixItNick what about those black one's? I'm interested
FixItNick how big r those tires?
Woow
Thx
U rock man u r alone who did this i am really impressed GOD BLESS U MAN
Thanks so much, Godspeed 👍
Great job brother!
What about the blown air bags???
i replaced them, but it was at night, it looked boring so i didnt include it into the full build video, however its, i did the vid in parts, in Part 8 here i removed them all then i think part 9 or 10 installed them. czcams.com/video/IYj2KvCEIxk/video.html
Little guy is cute.👶
thx lol
This is great, teaching the kid young lol good job bud
Built like a rock!!
Paper rock lol