hydrogen peroxide is good for cleaning almost anything. I've used it to get stains out of furniture fabric etc.it's some good stuff..also good if you have an abcess tooth..LOL..just put some in the mouth let it lay on that tooth and it helps draw out infection..did it before.
Thank you very much I need too add a number 2 on my JDM B16A I need it too just say B16A2 hopefully I can do it right so I can smog my car California is getting harder with all these engine swaps
You can also take it to the Smog Referee. Thats what I did on mine. He spent an hour looking the car over then put it on the dyno and it ran clean. Then he put a label on the door jamb saying what I did was approved. Everything has to be done exactly right to get them to approve it.
They can actually fail you if the numbers don't match, WOW! We don't have that here. Also, you just taught me something very interesting about the oven cleaner and peroxide, which brings up a a question. If anyone cleans there aluminum engine with oven cleaner (Hey, you never know), are they essentially destroying the engine?
One good thing about California is you can make a lot of money doing emissions related repairs. I've had my license for doing emissions testing for about 15 years , but I've never worked for any place that did that.
I'm making a simple metal placard for the 1969 Z/28 I'm rebuilding. Just my name, number and address on it, riveted somewhere on the car body. Then, I'll install an engine killswitch and GPS locator on it for security 😁 Can't be too safe living in this wild world.
231flash Must be something new. You can only see the numbers on 4 cylinder Honda cars. All the rest are too hard to see the numbers. First thing the guy said to me is thats not the right engine. Only .1 liters bigger. LOL. Everything else I made exactly the same.
I ended up taking it to the Referee and they approved everything and put a label on the door jamb saying that. So next time there wont be any problem. I explain all about it in the next Prelude Video. Not sure when the video will be finished.
bad ass video..also after you change the numbers couldnt you just spray the bottom end with a heat temp paint and make it all look new as apposed to corriding the numbers to match the block..thumbs up
dannyb20 vtec You could paint it. But I thought it would look more original corroded up. If you paint it I think they might know that you did something to it.
definitely illegal if using on public roads, just know the laws you are breaking before you break them. Of course we all just do this for fun and there is nothing wrong with stamping an unused block...
@@1970chevelle396 well what the point of doing it when it is going in garbage, all this video is doing is showing criminals how to circumvent the legal things in place, they changed everything on stolen cars thanks to such videos.
Saul Dean This would not help criminals one bit. You would have to change the VIN number on the engine for that. I changed the Model number of the engine, so people with different engines in there cars can pass emissions tests. Here in California it doesn’t matter how clean an engine runs , it has to be the correct engine in the car.
Good info right here. Liked that you showed the results of the chemicals too. That could be used for any other uses.
Alvarez Metal Works Hydrogen Peroxide is what people put on steel when they want the patina look after they put patch panels on.
1970chevelle396 good to know. Been wanting to educate myself on such subjects. Just haven't had time.
Great info, cheers Ken
Really cool vid. I learned a few things that I can use.
Thank you for sharing your knowledge!
+Something Clever Thanks
Wow! Have I never had a video that i actually needed with the tools I’m thinking to buy on the same engine be the first video lol
Great information!!
Neat process. Thanks.
Great solution !
fkn genius!
Very nice, i stamp my Old number in new block ej20 subaru.
Working man hands, nice
+MURK1911 Thanks
hydrogen peroxide is good for cleaning almost anything. I've used it to get stains out of furniture fabric etc.it's some good stuff..also good if you have an abcess tooth..LOL..just put some in the mouth let it lay on that tooth and it helps draw out infection..did it before.
Brilliant !
Thanks
Please let me know the font size of the number
Good shit bro .
Thanks
Cool!
Thank you very much I need too add a number 2 on my JDM B16A I need it too just say B16A2 hopefully I can do it right so I can smog my car California is getting harder with all these engine swaps
How to buy this tool number?
It is legal if you tell nobudy
Damn bro jsut went to smog H23a and failed cause of the stamp now ima try this !!!
Thanks once again
You can also take it to the Smog Referee. Thats what I did on mine. He spent an hour looking the car over then put it on the dyno and it ran clean. Then he put a label on the door jamb saying what I did was approved. Everything has to be done exactly right to get them to approve it.
How long did this take? I've had the proxcide on the block for 2 days and it hasn't done anything to the block yet.
One day.
Does anybody know the font and size for the Subaru EJ series engine?
Faily88 3/16
My man
They can actually fail you if the numbers don't match, WOW! We don't have that here. Also, you just taught me something very interesting about the oven cleaner and peroxide, which brings up a a question.
If anyone cleans there aluminum engine with oven cleaner (Hey, you never know), are they essentially destroying the engine?
Astral Auto Repairs Oven cleaner makes aluminum look bad.
One good thing about California is you can make a lot of money doing emissions related repairs. I've had my license for doing emissions testing for about 15 years , but I've never worked for any place that did that.
@1970chevelle396 What size? 1/4, 1/8 or 3/8 set? I'm guessing 3/8?
Cloneufc 3/8
I'm making a simple metal placard for the 1969 Z/28 I'm rebuilding. Just my name, number and address on it, riveted somewhere on the car body. Then, I'll install an engine killswitch and GPS locator on it for security 😁 Can't be too safe living in this wild world.
Your awsome. So the other h23 your stamping a4. Is it going in another honda. ? Or prelude!?
No. I was just showing how to re stamp it.
I lived in Calif. for 30 years,and never had them look at a engine number. Is it something new they're doing?
231flash Must be something new. You can only see the numbers on 4 cylinder Honda cars. All the rest are too hard to see the numbers. First thing the guy said to me is thats not the right engine. Only .1 liters bigger. LOL. Everything else I made exactly the same.
I didn't know you had to do all that. I think that will pass for sure
I ended up taking it to the Referee and they approved everything and put a label on the door jamb saying that. So next time there wont be any problem. I explain all about it in the next Prelude Video. Not sure when the video will be finished.
@1970chevelle396 how much you'll charge to do this for my engine
Great trick.
"this might be illegal" lol you dont say. good info.
and what size is the numbers down below the "h22" ??
I have no idea since I only re stamped the H22
Thank u dude
Thanks
@@1970chevelle396 where do you purchase the whole stamping set ?
@@Mstarindacut I bought them at Harbor Freight . You can also buy number and letter stamps online
genius!
+sever 13 clouds Thanks
what's the size of your steel tampering tools???
3/8
Tell me plz what chemical u had used.
He just did! Didn't you watch the video ????
Would this work on a motorcycle engine ? With smaller stamps to match the old stamp size ?
You can do that on pretty much anything.
1970chevelle396 ok thanks man and thx for the fast replie 👍👌🏻
What's the name of these tools u use to stamp the latter's
There just number and letter stamps.
What size in mm are the numbers? Thanks
+Álvaro Méndez I’m not sure what they are in MM. there 3/8 stamps.
@@1970chevelle396 that's 10mm!thanks a lot Sir
but the lettering is a lot bigger than the original. p.s. it's easy to stamp the letters individually if you mark it out first!
Assalam walekum this brother, where will I get this, whatever number you have
Rare ? Desirable? What yrs , what models. Thanks
In California the engine model numbers have to be correct for the vehicle to have the emissions test done.
bad ass video..also after you change the numbers couldnt you just spray the bottom end with a heat temp paint and make it all look new as apposed to corriding the numbers to match the block..thumbs up
dannyb20 vtec You could paint it. But I thought it would look more original corroded up. If you paint it I think they might know that you did something to it.
1970chevelle396 ya i hear you.. cool vid man
What's the name of the number tools
There Stamps
Where do i get the stamps?
Harbor Freight
what percentage of hydrogen peroxide levels are you using?
100 percent
@@1970chevelle396 I think it's 50 percent hydrogen peroxide.
It’s whatever comes in those bottles of it. Since I didn’t mix it with anything.
@@1970chevelle396 in the process does it only use hydrogen peroxide?
Yes
Where can i buy this tool
Harbor Freight.
Smart😂
Thanks
, हमें इंडियन पंच करने वाली डाई लेना है कैसे खरीदें
How do I contact you ? I need your help.Are u on insta Facebook?
Hme ye mgvane ja he
Might not be legal lol 😂 U know bro wat ya doin lol
Really good job.. thanks. I live in california also. The laws the make are rediculous.
Thanks
is this even legal?
It is unclear how the number has changed!
It said H22A4 before. Now it says H23A
definitely illegal if using on public roads, just know the laws you are breaking before you break them. Of course we all just do this for fun and there is nothing wrong with stamping an unused block...
Not illegal when you do it to an engine block that’s been cut in half.
@@1970chevelle396 that's what i was trying to state...
This is illegal.
Saul Dean It’s completely legal when you do it on an engine block that’s been cut in half and is going in the garbage.
@@1970chevelle396 well what the point of doing it when it is going in garbage, all this video is doing is showing criminals how to circumvent the legal things in place, they changed everything on stolen cars thanks to such videos.
Saul Dean This would not help criminals one bit. You would have to change the VIN number on the engine for that. I changed the Model number of the engine, so people with different engines in there cars can pass emissions tests. Here in California it doesn’t matter how clean an engine runs , it has to be the correct engine in the car.
@@williamlevy1981 go and get job, and stop stealing from hard working people. And changing vin numbers. This is illegal dick head.
@@sauldean6430 why are u here then?
is this even legal?