Dr Marios Vintage Polaris Snowmobile Parts Warehouse Tour and Sled Display.
Vložit
- čas přidán 19. 09. 2023
- A look at some of Dr Mario's Huge Inventory of Vintage Polaris Snowmobile Parts and the sled display from his customer appreciation party. Dr Mario's contact Info is in the video!
Want to support the channel? Go To Nutter's Speed Shop Patreon Page: / nuttersspeedshop
or
Send beer and pizza funds through Pay Pal to nuttersspeedshop@gmail.com. No questions about sleds will be answered by e-mail. Leave a comment. Comments help the channel, e-mails don't.
or
Want to support the channel? Go To Nutter's Speed Shop Patreon Page: / nuttersspeedshop
or
Send beer and pizza funds through Pay Pal to nuttersspeedshop@gmail.com. No questions about sleds will be answered by e-mail. Leave a comment. Comments help the channel, e-mails don't.
or
Want to send Farley dog treats or send something to Nutter's Speed Shop?
P.O. Box 241
Stacy Mn 55079
Shirts and stickers are here: nutters-speed-shop.myspreadsh...
My favorite (almost) universal tether. Works on all vintage Polaris amzn.to/3LLn3gm
99502H 2RS bearings - oddball smaller bearings used in some Polaris skids. amzn.to/3D9yLfO
Rivnut tool we use in the shop: amzn.to/3H98pNp
The O-rings for Polaris TX carbs amzn.to/3wc25hG
Shoe Goo -- Fix your sled seat! amzn.to/3XAJfgc
Shake and Break! The Ultimate Philips impact driver! amzn.to/3CcJgyk
62052RS bearing I have been using. Cheap, but seem OK for my use: amzn.to/3h2ZimS
Wix 33001 1/4" Fuel Filter for sleds: amzn.to/3zs1x9A
Brass 3/4" hose barbs: amzn.to/3Fvrjh4
Spring Compressor - right size for sleds: amzn.to/3MU5Jo1
Really deep 12mm socket for above compressor: amzn.to/3uIDyjE
9/16 6 point socket, 1/4" drive: amzn.to/3EYDQcF
Mayhew Dominator Pry Bar set: QUALITY!!! amzn.to/3yvg0B6
Genuine Hella H4 headlight for wedge Indys: amzn.to/3LjQOmq
Insulation for belly pan near pipes: amzn.to/3DqyOEU
7PSI lever lock radiator cap for Vintage Polaris (large cap) amzn.to/3BhUjVN
1/4-20 flat nuts for vintage Polaris: amzn.to/3qGa18e
9mm hose clamp for fuel lines: amzn.to/3xBS51Q
Three Bond 12-11: amzn.to/3JVU4CM
Ultrasonic cleaning solution that I use: amzn.to/3scP7PX
Heavy Duty Voltage Regulator: amzn.to/3sY1m1W
LED light that fits TX and TXL: amzn.to/3Hcb2vEtage and Classic snowmobile swap meet.
Want to send Farley dog treats or send something to Nutter's Speed Shop?
P.O. Box 241
Stacy Mn 55079
Shirts and stickers are here: nutters-speed-shop.myspreadsh...
My favorite (almost) universal tether. Works on all vintage Polaris amzn.to/3LLn3gm
99502H 2RS bearings - oddball smaller bearings used in some Polaris skids. amzn.to/3D9yLfO
Rivnut tool we use in the shop: amzn.to/3H98pNp
The O-rings for Polaris TX carbs amzn.to/3wc25hG
Shoe Goo -- Fix your sled seat! amzn.to/3XAJfgc
Shake and Break! The Ultimate Philips impact driver! amzn.to/3CcJgyk
62052RS bearing I have been using. Cheap, but seem OK for my use: amzn.to/3h2ZimS
Wix 33001 1/4" Fuel Filter for sleds: amzn.to/3zs1x9A
Brass 3/4" hose barbs: amzn.to/3Fvrjh4
Spring Compressor - right size for sleds: amzn.to/3MU5Jo1
Really deep 12mm socket for above compressor: amzn.to/3uIDyjE
9/16 6 point socket, 1/4" drive: amzn.to/3EYDQcF
Mayhew Dominator Pry Bar set: QUALITY!!! amzn.to/3yvg0B6
Genuine Hella H4 headlight for wedge Indys: amzn.to/3LjQOmq
Insulation for belly pan near pipes: amzn.to/3DqyOEU
7PSI lever lock radiator cap for Vintage Polaris (large cap) amzn.to/3BhUjVN
1/4-20 flat nuts for vintage Polaris: amzn.to/3qGa18e
9mm hose clamp for fuel lines: amzn.to/3xBS51Q
Three Bond 12-11: amzn.to/3JVU4CM
Ultrasonic cleaning solution that I use: amzn.to/3scP7PX
Heavy Duty Voltage Regulator: amzn.to/3sY1m1W
LED light that fits TX and TXL: amzn.to/3Hcb2vEt - Auta a dopravní prostředky
Dr Mario's Contact Info is in the video! Please find it in the video instead of asking for it.
John, is this heaven…….? Lol
Cheers 🍻
It's Just Don's Place LOL.
Great video John! Polaris people are vary fortunate to have a great person like Don. Not only with parts be the knowledge is there and he is happy to share.
Right on
Holy crap !! wow
I'd be broke after walking out of there 😂.
I've always wanted to see his place. Thanks Nutter! You guys are doing a great job with your channel. I never thought of hitting Don up for a 530 crank and case. -- Coupe.
Hi Coupe!
Such a cool place . I was there about 8years ago. Seems a little fuller now.
Wow! Thanks john. I was in heaven watching this video.
Glad you enjoyed it
Todd clynes looking for that royal blue tank cover you just had in your hand
Nice vid, love seeing all the old stuff.
Glad you enjoyed
wow the indy 600, I always wanted one. that year. my dad had a indy trail first with the red hood then the grey hood.
My 1983 Indy 600 came from Dr Marios collection. Dr Mario sold it to a friend who eventually sold it to me. There's a playlist for that project. czcams.com/video/QJGB7TPu5zU/video.html&pp=gAQBiAQB
Wow what a great tip! Thanks ....Just the place I'm looking for.
Glad it was helpful!
Needs some Arctic Cat stuff!🤣
There's so much stuff there might be some.
Closed face clutch bushings got my attention.
He doesn't have any walbro parts though.
@@nuttersspeedshop Nobody has EVERYTHING.
I also have a 1990 classic 500 blue and gold like yours. Where would you suggest going for a custom seat cover to match the OEM??? Scotty's Sleds is no longer producing covers. Thanks, love the videos
I heard about Scottys. That is too bad. I have no idea where to get one. My cover is original.
when is NUTTER FEST snowmobile run happening this year ???
I would like to do something. It's probably going to be a poker run or show out of Bethel MN this year.
I live in the Sierra Nevada mountains. Nevada is not known for their 100 acre salvage yards like you guys are spoiled and have access to. My 1990 500 classic barn find (sitting on the trailer since 1999) has only 846 miles and deserves to be kept alive. What would be your top three salvage yards on your side of the country?
I go to swap meets.
I tell ya that was worth the six hr drive
It sure was.