It was definitely computerized machinery that built the parts for that engine, considering that all had to be very precise and in miniature. Well done... work of art.
omg! love the little push rods! that roll was a yeah baby! moment. the landing was a sphincter relaxing moment. what a beauty! cheers from california 🍻
Lot of vibration in the cowl mounting ring, that lead isn't going to stay there for long without some bigger screws to control that shaking. Paint job looks awesome though. Sounds good too.
Hello mate yes kit is a top Rc corsair 91” fully composite , engine is a UMS 150 cc 5 cylinder four stroke petrol the full cost of this was around £6700
No there not , but the tyres are as they are only temps as Robart didn’t have the correct ones in stock , they have been sent to me now and I will be fitting them :)👍
Engine is still running in and cooling is an issue we’ve resolved it with telemetry sensor on no 1 cylinder plus baffling and a bigger tank as it’s thirsty at the moment 👌
@@Dukesy Have you checked spark plugs, sounds very rough at mid throttle and transition, typical of cyl#3 mixture too rich, you don’t notice it at high RPM, have you checked cly temperatures? Just a thought, great flight. Looks a little tail heavy with cowl off.
It was definitely computerized
machinery that built the parts for that engine, considering that all had to be very precise and in miniature.
Well done... work of art.
thank you. Please like and subscribe it really does help out the channel
That motor is so cool. Sounds like a top fuel dragster
yeah mate 🤣👍 wild. I think this was only half throttle aswell
Sweet my favorite plane to see and have. What a sweet sound, thanks. @@Dukesy
Please like a subscribe mate 👍
omg! love the little push rods!
that roll was a yeah baby! moment. the landing was a sphincter relaxing moment.
what a beauty!
cheers from california
🍻
wow all the way to california!!! awesome!! please like and subscribe it would be great to keep in touch 👍
Good job! You did the important part: You landed safely!
Outstanding engine and throttle response! 👍
It sure is! :)
Probably the best R/C airplane landing I've seen . I love the sound of big prop , slow-turning engines for R/C . Sounds more real .
appreciate your comment mate!! please like and subscribe for more
Wow, this is a great scale model r/c plan! Great radial engine sound; very realistic! Great flying, too! Cheers! 😁👍🛠️🔧
Many thanks!
Not only is that plain cool as hell, You are a hell of a pilot
appreciate the nice comments mate! I was the camera man on this but my mate is a great pilot 👍love it
Gotta love the torque roll control on take off. Silky.
That engine is a masterpiece that is great flying.😊
It sure is! thanks mate please subscribe for more 👍
Mini pushrods n rockers-RAIDIAL🎉 It's a HOT ROD.❤
proper beast 😂👍
What a masterpiece that engine is!
work of art isnt it :)
The engine has so much power, the model doesn't need wings.
Well done! Beautiful plane, and the engine is excellent! Love that sound!
Thanks a lot!! please like and subscribe mate
Absolute work of art!💪👍
Thank you very much!
Beautiful plane with AWESOME sound!!
Beautiful! Love that Corsair!
Huge thanks mate she’s a dream to fly
Thank you so much 👍
Simple Superb !!
Flight, Sound, controll ....ev thing great😂
Thanks 👍
Lot of vibration in the cowl mounting ring, that lead isn't going to stay there for long without some bigger screws to control that shaking. Paint job looks awesome though. Sounds good too.
SWEET! That engine has some power!
Beautiful great sound and massive power 👌💪👍
Thank you! 👍please like and subscribe for more
Well done! great sounding Radial.
Beautiful plane, betcha it's a riot to fly...!!! Doesn't take much revs or runway to get off the ground...!!! 😊
Flies amazing it’s well balanced using the Vanessa method and it’s bang on 👍👌👌
Superbe réalisation. Bravo Monsieur (Luxembourg)
Seriously! What an epic looking model. Good luck !
such a beast mate. Thank you
Thank you
Well done that sounds SICK 🎉
"Impressive, most impressive." - D. Vader 😎
That thing sounds WILD!!!!!😊
sounds better than my car 😂
Great job my friend got to love the radials😊
thank you 👍
1:04 “yeah mate, that’s the bollocks man”
Things like this make me proud to be English 👍🏻👍🏻👍🏻🇬🇧🇬🇧🇬🇧
Me too 👌
That’s the sound of a mean machine!🎉🎉🎉🎉🎉😮
That was fun! Well done, have a beer!
I know I did mate 😂 🍻
Sounds beefier than the real deal haha
😂😂😂👍
Little pushrods are cool !
That was awesome!
thanks, please like and subscribe 👍
Well done...!
Beautiful
thank you, please like and subcribe 👍
Love it my favorite ww2 plane
LOVE IT!!!!! 👍🏻👍🏻👍🏻
It sounds like someone took a shrink ray to a warplane.
Also, for some reason, to me, it almost sounds bigger than it is, maybe more like 500cc.
Beautiful!
Thank you!
Thank you 🙏
Very nice
Thanks
Lotta nerves there, but well done. I've done a few maidens myself, heart pounders
Thanks mate👍 yeah always nervs lol. I had a white knuckle ride just filming 🤣
@@Dukesy I'll bet you did. Built quite a few myself, and the work that goes into them, well you just don't want to lose them.
crazy as hell. needs retractable landing gear ... etc. crazy ! oh yeah also needs rockets to attack a ground target. ...
What a beast with that engine. Looks good. Are the main wheels a bit under sized?
Nice
Thanks, please like and subscribe for more mate 👍
yea.......your there. Not going to get any better then that.
Nice engine the Moki sounds wonderful also. Wonder which one is the better engine.
not sure mate. I havent even seen both. This ums is a beast
Was that supposed to be Normandy markings?
Any reason why the gear stayed down during flight?
Man that thing sounds and flies nicely! Cant wait to see it complete. U have to give a lot of R rudder on TO?
Thanks for your comments , actually I didn’t give to much right rudder. Just a tad and no trims needed she flew amazingly
It sings.
Where are the chine guns?
What propeller is there mounted ?
Let’s work on getting the gear up!
The wheels looks a little bit small. Or is it just me?
May I ask what size propeller are you using?
this is my mates channel. He should be able to help you
czcams.com/video/8WP88FwhtgY/video.htmlsi=sxmenAKcsZKeTAVT
28 x 10 for running in
Any info about the kit and more info about the engine?
look for Jason Brand in the comments mate. Its a mates plane I will let him know you are asking
Hello mate yes kit is a top Rc corsair 91” fully composite , engine is a UMS 150 cc 5 cylinder four stroke petrol the full cost of this was around £6700
Surely the wheels aren't period correct,but great looking plane
Nah they are on retracts but left down for the maiden
Wheels look too small
Yes they should be period but not painted yet there made by Robart
@@rolandtheheadlessthompsong4346wheels aren’t to small but tyres are the wrong size as Robart didn’t have any of the correct ones in stock
Nice model, the main wheels are a tad too small
No there not , but the tyres are as they are only temps as Robart didn’t have the correct ones in stock , they have been sent to me now and I will be fitting them :)👍
Wrong tyres on it but I have just been sent the correct size now cheers
The coolest rc plane I’ve seen so far mate, mad props for doing it up the way that you did 👍👍
appreciate it mate!! 🤘👍
@@Dukesy you’re more than welcome and please post more if you can, I know I’d appreciate it as well as more people would 😊👍
Why no cowling ?
Engine is still running in and cooling is an issue we’ve resolved it with telemetry sensor on no 1 cylinder plus baffling and a bigger tank as it’s thirsty at the moment 👌
Flying harley davidson
😂😂👍
Engine probably costs over $1000
👍£2400
@@jasonbrand5352 Blimey!
@@davidwhite4874 the total cost is around £6700
Is that cool? or What?
its Damn coool brother 🤣👍
Sounds angry
It’s very angry 😂
Three is not firing.
yeah it is mate look again..I think you missed it
@@Dukesy Have you checked spark plugs, sounds very rough at mid throttle and transition, typical of cyl#3 mixture too rich, you don’t notice it at high RPM, have you checked cly temperatures? Just a thought, great flight. Looks a little tail heavy with cowl off.
😂
Did you build the engine from scratch or is it a pre manufactured part?
you buy it built I think 👍
UMS 150cc look them up online
So frickin cool
Thanks mate :)
Dude put the wheels up what are you worried about its model ?
They went up on second flight mate thanks
agreed!
The correct and considerate comment would have been.....
"Dude, beautiful maiden, nice job".
Well done! 👍I’m curious about the output of that engine. Horsepower and torque.
10HP I think mate. Look up Jason brands channel he might be able to help you with more info 👍
You can look it up it’s.a UMS 150cc 5 cylinder radial 👌👍