Installing Steeda Progressive Lowering Springs On My 2024 Mustang GT!
Vložit
- čas přidán 28. 09. 2023
- I’m this video we install Steeda progressive lowering springs on my 2024 Mustang GT. These springs lower the car 1.2” in the front and 1” in the back. The car looks so much better now!
Steeda Progressive lowering springs - www.steeda.com/steeda-mustang...
Want a Daily Driven shirt of your own?! ⬇️
Daily Driven Merch - daily-driven-merchandise.mysp...
If you liked the video and want to see more, Please Subscribe!! 🙂
Products I use in my videos!
GoPro Hero 11 - amzn.to/3ZhB7D3
Osmo Action 4 - amzn.to/467cWcJ
Nikon Z30 - amzn.to/44QZVmA
----OTHER IMPORTANT STUFF----
➡️ Follow me on instagram @daily._.driven
➡️ Follow Me on TikTok @Daily._.Driven
➡️ Email me @ dailydrivenchannel@gmail.com
😀THANK YOU FOR WATCHING! 😀 - Auta a dopravní prostředky
My first time doing suspension on my car i learned sometimes it goes easy and sometimes its super frustrating....hard work pays off! Looks amazing!
Very true!! And it only takes one wrong thing to happen to turn a few hour job into an all day event lol! 😂 Thank you!
Car is sweet man. Congratulations!! Great videos, I like how you stop in the middle of something and explain it when a challenge comes up. also it would be neat if you did some side by side before and after shots. keep it up you have my support.
Thanks bro I just bought mine and I been looking for videos for 2024 🤩🤩🤩
Great job and video bro! Keep them coming!!!
Thanks man! Appreciate it!! 👍
Awesome video thank you for sharing you wouldn’t believe I probably watch your video 100 times over and over before I even did my own install on my 24 Mustang I noticed that you did not cut down the bump stop on the rear shocks absorber.. on your video my question is, did you cut it or not? And if you didn’t how does your back end rides on your vehicle?
Looks great bro.. new sub. Just picked up my S650 on Saturday. Race Red with PP and NPP, def liking those springs. What's next for you?
That looks SO much better! Looking forward to seeing it on the 20" RTRs :)
Thanks!! Next video! 😉
Looking good 👍👍
Looks awesome. Going with pedders extreme coilovers 2.5 or 3 inch drop depending on if i want to go 19’s or 20’s . RTR front lip .
Nice! That will look great I’m sure!
Looking good.
Since you have a v8 you seem cooler now so i subscribed hahaha jk, keep up the good work man. I just got a black gt thinking of lowing it, any issues you ran into yet with lowering? I hate to mess with suspension on a new car but it makes them look so much better
Sweet! Love your car! Im wanting one n trying to fig out how i can get another one with having a kid lol
Thanks man!! Oh yeah that would make it more difficult! Lol!
This thing is gonna look sick
I hope so! Ha 😀
A very needed mod has to be a spoiler and a defuser it will make look way more aggressive
Definitely!! 👍🙂
Great first mod, cant wait for the exhaust mod. Take it easy.
Thanks man! Yeah I can’t wait to do the exhaust! Hopefully soon! 👍
@@daily_driven MBRP RACE
Great video! Love the color! What kind of torque wrench you using? Brand? Thanks!
Thank you!! I have a craftsman torque wrench I got as a gift a few years back! So far I love it!
im guessing that that middle bolt after installing the spring is just till its tight or is the a torque spec to set it to? also y did you have to get an alignment?
i like how you named it astro lol! very cool name. my s650 grabber blue eco is named Little Smurf
Thank you!! Haha nice! That’s a great name as well!
My EB is white and I call it Casper.
What Drive Click Torque Wrench are you using?
Did it throw your camber off on the front wheels??
Hey man I’ve been subscribed since the good ol Ecoboost daze. What brand is that spring compressor? It seems to have served you well!
Hey man! Thanks for sticking with the channel since the beginning!! Ya know I’m not 100% sure, I’ll have to look quick and see what brand it is. Honestly for this spring install a tool like this would have probably been better. amzn.to/3IDXo6O
The one I used was a little tricky to make work.
did you notice any handling differences?
Looks great do you think a lot of the suspension has changed from the s550?
Thanks! No the suspension is almost identical to the s550 👍
I am having the WORST time with these local people here, the spec for alignments are not out at places here. Only the dealers have it, and they are claiming my car is too low to get it on the rack. But I think they just don't want to do it. I took it to several places, and it went on the rack for the work just fine. How did you get yours done at a place other than the dealer? Did they use 2023 specs to do it? Thanks.
Letssss gooo
Nice 👍🏻🚙
Thanks! 👍🙂
Looks good can you post link for the spring I have 24 mustang gt I want to order them thanks
Absolutely! I have updated the video description with the link to steeda’s product page 👍
looks awesome!
i’ve also began modding my s650 ecoboost. i bought an MBRP Race exhaust from the s550 and adapted it to fit (they are not the same) and it actually worked. I’ve also added 1.5inch spacers on all four wheels and it looks super aggressive. the performance pack wheels look amazing when wide.
Sweet man! Congrats! I’m sure the MBRP sounds good! Nice!
Hey buddy. Can you please explain how did you manage to install MBRP Race on 2024 Ecoboost? Can you please explain more details? As I am reading people are saying it can't fit and we need to wait for 2024 edition? Thanks for help
How was your alignment (camber) before and after?
It was off for sure, actually working on this now with an alignment shop. Video coming soon with more info on this 👍🙂
car look exceptional, you need eibach spacers 20 or 25 cm and then it gonna look like a beast, some camber also woulndt hurt
Thanks! If I was going to keep these wheels I would definitely do spacers 👍🙂
@@daily_driven aaaaah u got wheeeelll plans.. ight then mate ! Mustang family
Are you going to tint the windows? Thats always my 1st mod.
Yeah I definitely am! Hopefully soon ha
Do u put chamber plates or chamber bolts???
Nope! Shop was able to align within spec without them. I go more in depth with this in my wheel and tire install video
Yo how did u get the rear driver side spring out? Did you remove the exhaust?
I lowered the subframe and used a 2x4 to pry the subframe down to release the spring. Kind of a pain without a lift but it worked lol
@daily_driven Copy that - I had to remove the driver side hanger on the exhaust to get the extra wiggle room. All good now bro. I love the ride way more. Keep up your vids bro - happy new year.
Did you just do springs? Did you put any other parts?
Yup just springs for now 👍
Did you buy camber bolts or camber plates?
Nope didn’t need them to get within spec 👍
@@daily_driven Nice! Without any issues? I’ve heard mixed answers.
Hey do you have PPF up front?
I don’t, but with I could have. Just a little pricey
How does the car feel with suspension
It feels good! I think it’s even gotten a little better over the last few days actually
if your car could talk i bet Astro would say im so happy my owner loves me :D
Haha! I hope so! 🙂👍
Are spline bolts reusable?
As far as I know they are. These at 350miles definitely were going to be lol
@@daily_driven I don't think it has anything to do with mileage but I can be wrong...
What’s the point in buying this if it doesn’t come lowered?
Time to upgrade that VW
Lol! Yeah it is!! 😂
You have big balls ripping apart your brand new car (I would be scared!). Great job - looks awesome.
Haha! Thanks! The way I see it is it’s all just parts, they went together so they can come apart lol 🙂
Way too low. It looks like your car's suspension is broken now.
Nice job, but if you want more subscribers try to show "exactly" what you're doing ( look how many mechanics are popular this days). Looks great. 👌🍻
Thanks!! I appreciate that but honestly that’s not my style. I’m not a shop so super detailed installation videos are not something that I’ll probably do. Plus CJ pony parts has a nice detailed video of installing their springs on a S650 👍
It’s a auto lost interest
🥲